Proceedings of the Membrane Society of Korea Conference
/
1997.10a
/
pp.71-72
/
1997
1. 서론 : 공기중의 산소분리용 고분자막은 높은 선택도를 동시에 요구한다. 이 두가지 조건을 만족시키는 소재 개발과 기존의 고분자물질을 수식하는 연구가 진행되고 있다. 고분자막에 대한 수식방법으로는 UV처리, plasma처리등이 있으나, 이들 방법은 선택도는 증가시키나 투과도를 감소시키는 경향이 있다. 기체의 투과저항을 줄이기 위하여 다공성 지지체 위에 박막을 입힌 복합막과 박막의 skin layer와 sub-layer를 갖는 비대칭막은 투과저항을 줄일수 있으나 선택도는 고분자 고유의 80%정도까지 감소되는 것으로 알려졌다. 본 연구의 목적은 고분자 복합막의 투과분리특성을 향상시키기 위한 것으로 지지층의 세공과 표면에 실리카/고분자를 충전, 피복시켜 투과분리특성을 조사하였다. 현재까지의 연구는 낮은 투과계수와 높은 선택도를 갖는 고분자물질이 사용되었으나, 본 연구에서는 폴리이미드로는 폴리이미드 중에서 투과계수가 가장 높다고 알려진 6FDA-p-TeMPD[{(3,3',4,4'-dicarboxyphenyl)hexafluoropropanedianhydride}-{2,3,5,6-Tetra-methyl-1,4-phenylenediamine}] 폴리이미드를 택하였으며 다공성지지체는 aluminum oxide를 사용하였다 . 본 실험에서는 선택도와 투과속도에 주로 영향을 미치는 폴리이미드와 실리카의 양에 대하여 고찰하였다.
본 논문에서는 Cobalt interlayer 와 Titanium Nitride(TiN) capping layer를 Ni SALICIDE의 단점인 열 안정성과 sheet resistance 와 series 저항을 감소시키는데 적용하여 0.lum 급 CMOS 소자의 특성을 연구하였다. 첫째로, Ni/Si 의 interface 에 Co interlayer 를 증착하여 Nickel Silicide의 단점인 열 안정성 평가인 700℃, 30min의 furnace annealing 후에 낮은 sheet resistance와 누설전류를 줄일 수 있었다. 두번째로, TiN caping layer를 적용하여 실리사이드 형성시 산소와의 반응을 막아 실리사이드의 표면특성을 향상시켜 누설전류의 특성을 개선하였다. 결과적으로 소자의 구동전류 향상, 누설전류 저하, 낮은 면저항으로 소자의 특성을 개선하였다.
Journal of the Microelectronics and Packaging Society
/
v.1
no.2
/
pp.105-112
/
1994
BaTiO3 의 B-site에 0-0.03 몰 범위의 NiO를 첨가한 Ba1-xSrxTi1-y-wNiyZrwO3-y 유전 체에서 NiO 첨가가 유전특성 및 절연저항의 내환원성에 미치는 영향을 조사하였다. B-site Ni 치환에 의해 a 축의 격자상수는 증가하고 c 축의 격자상수는 감소하여 정방성 c/a가 감 소하였으며 단위격자의 부피는 증가하였다. NiO 첨가에 따라 큐리온도는 저온으로 이동하 였으며 큐리온도의 변화율은 소결분위기에 영향을 받았다. NiO가 첨가되지 않은 조성에서 는 산소분압 109 MPa의 환원분위기 소성에 의해 비정항이 107$\Omega$.cm로 저하되었으나 0.01 몰이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을수 있었던 1011$\Omega$.cm로 저하되었으 나 0.01 몰 이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을 수 있었던 1011$\Omega$.cm 이 상의 비저항을 유지하였다.
Jeon, Sang-Chae;Kim, Keon Sik;Kim, Dong-Joo;Kim, Dong Seok;Kim, Jong Hun;Yoon, Jihae;Yang, Jae Ho
Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
/
v.17
no.1
/
pp.37-46
/
2019
As candidates for accident-tolerant fuels, ceramic microcell fuels, which are distinguished by their peculiar microstructures, are being developed; these fuels have $UO_2$ grains surrounded by cell walls. They contribute to nuclear fuel safety by retention of fission products within the $UO_2$ pellet, reducing rod pressure and incidence of SCC failure. Cesium, a hazardous fission product in terms of amount and radioactivity, can be captured by chemical reactions with ceramic cell materials. The capture-ability of cesium therefore depends on the thermodynamics of the capturing reaction. Conversely, compositional design of cell materials should be based on thermodynamic predictions. This study proposes thermodynamic calculations to evaluate the cesium capture-ability of three ceramic microcell compositions: Si-Ti-O, Si-Cr-O and Si-Al-O. Prior to the calculations, the chemical and physical states of the cesium and the cell materials were defined. Then, the reactivity was evaluated by calculating the cesium potential (${\Delta}G_{Cs}$) and oxygen potential (${\Delta}G_{O_2}$) under simulated LWR circumstances of normal operation. Based on the results, cesium capture is expected to be spontaneous in all cell compositions, providing a basis for the compositional design of ceramic microcell fuels as well as a facile way for evaluating cesium capture.
Kim, Cheol-Hwan;Lee, Sang-Jin;Baek, Jong-Hyeon;Jo, Seong-Geun;Ham, Dong-Seok;Choe, U-Jin;Kim, Gwang-Je;Lee, Jae-Heung
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.336.1-336.1
/
2014
대표적인 TCO 물질인 ITO는 디스플레이 패널이나 태양 전지 등과 같은 소자에 널리 사용되고 있다. 최근에는 대량생산 및 대면적화, 그리고 유연 디스플레이 응용을 위해 롤투롤 스퍼터링(roll to roll sputtering) 공정을 이용하여 플라스틱 기판에 ITO박막을 증착하여 ITO 필름을 제작하고 있다. 롤투롤 방식으로 ITO 필름의 제작 시 공정 변수에 따라 ITO 박막의 전기적 광학적 물성 변화가 매우 크기 때문에, 공정 변수에 따른 ITO 박막의 전기적, 광학적 특성 변화에 대한 연구의 필요성이 매우 높아지고 있다. 따라서 본 연구에서는 롤투롤 스퍼터링 방법으로 PET 기판 위에 다양한 조건으로 ITO 박막을 증착하여 공정변수에 따른 ITO 박막의 물성을 조사 하였다. 이를 위해 ITO (In/Sn=95/5 wt.%) 타겟을 사용하여 DC 파워와 산소 분압비, 열처리 온도 등을 변화시켜 낮은 면저항과 높은 광투과도를 가지는 최적의 ITO 증착 조건을 찾은 후 ITO 박막을 PET 기판 위에 두께 별로 증착 하였다. ITO 박막의 두께와 열처리 온도에 따른 전기적 특성은 면저항 측정기와 홀 측정 장치를 이용하여 분석하였고, 분광광도계와 탁도 측정기를 이용하여 광학적 특성을 관찰하였다. 또한, GIXD를 이용하여 이들 박막의 구조와 결정성에 대한 조사를 수행하였다. 이 결과들로부터 산소 분압비에 따른 ITO/PET 박막의 저항 특성 변화와 ITO 박막의 두께와 열처리 온도에 따른 구조적, 전기적, 광학적 특성을 조사하여, 롤투롤 스퍼터링법에서 공정 조건에 따른 ITO/PET 필름의 물성변화를 보고하고자 한다.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.132-132
/
1999
카본 박막은 내마모성, 내산성, 윤활성 및 높은 경도를 가지고 있어, 경질 박막 및 기능성 박막으로 주목을 받고 있으며 그 응용 분야가 매우 크다. 본 연구는 전자빔(Electron Beam)을 카본 grain을 증발시킴과 동시에 아르곤 보조 이온빔을 조사시켜 이온에너지에 따른 박막의 물성변화를 관찰하였다. 특히 본 연구에서 이용한 이온빔 증착 장치의 장점은 이온 충돌 에너지의 조절이 가능하다는 것이다. 카본 박막의 제조는 이온빔이 증착된 고진공 증착 장치를 이용하였고 이원빔원으로는 Oxford Applied Research 사의 RF 방전형 이온빔을 이용하였다. 배기장치는 유회전펌프와 터보펌프를 사용하였다. 기판은 홀더에 장착하기 전에 전처리를 거친 후 용기 내에서 이온빔에 의해 2차 청정을 하였다. 빔전압이 500V, 빔 전류는 4mA/cm2 및 RF power를 400W로 하여 기판 청정을 거친 후 전자빔을 이용하여 흑연을 증발시켜 박막을 제조하였다. 이때 이온빔 전압을 100~500V, RF power를 400~550W 으로 조절하였다. 카본 grain을 Si 및 Slide Glass 기판위에 1$\AA$/sec의 증착율을 유지하면서 증착하였다. 카본 박막의 박막은 평균두께는 0.3~0.4$\mu\textrm{m}$이며 SEM을 이용하여 단면을 관찰하였다. 라만 분광분석을 통하여 비정질 카본 박막의 결합특성을 조사하였고 scratch tester를 이용하여 박막의 밀착력을 관찰하였다. 그리고 카본 박막의 전도도 특성을 알고자 비저항을 측정하였으며, 박막의 성분 분석을 위한 AES 분석을 하였다. 1)AES 결과:표면에서와 박막 내부에서는 불순물인 산소나 질소의 함량이 거의 존재하지 않음을 관찰하였다. 2)경도:1,000~1,400kg/mm2 3)라만 분광 분석:300V의 이온 에너지를 분기로 박막 구조의 변화에 의한 스팩트럼의 변화를 보였다. 4)비저항:10-2~10-1$\Omega$.cm
Transparent and conducting tin oxide films were prepared on Pyrex glass substrates by the remote plasma chemical vapor deposition (RPCVD). The main control variables of the RPCVD process included the deposition time, the flow rates of tetramethyltin, oxygen and argon, the radio-frequency power, and the substrate temperature. Dependence of the deposition rate, electric resistivity, optical transmittance and crystal structure on these parameters was systematically examined to prepare high qualities of tin oxide films and to better understand RPCVD process. The effect of those parameters on the properties of tin oxide films in complicatedly related on another. A tin oxide film parameters on the protimized deposition conditions exhibited deposition rate of 102 $\AA$/min, electric resistivity of $9.7\times 10^{-3}\Omega$cm and visible transmittance of ~80%.
Park, Yong-Seok;Park, Ho-Gyun;Jeong, Jin-A;Choe, Gwang-Hyeok;Kim, Han-Gi
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.196-196
/
2010
본 연구에서는 플렉시블 GZO 단일 박막과 GZO/Ag/GZO (GAG) 다층 박막을 연속 성막이 가능한 롤투롤 스퍼터링 시스템을 이용하여 상온 공정을 통해 성막하여 그 특성을 분석 하였다. 일반적으로 고품위의 GZO 박막을 제작하기 위해서는 고온 공정이 필수적인 것으로 알려져 있으나 본 실험에서는 플렉시블 PES 기판상에 상온 공정을 통해 후 열처리 없이 고품위의 GZO, GAG 박막을 얻을 수 있었다. 단일 GZO 박막은 공정 압력과 산소 유입량을 변화하여 제작하였고 GAG 다층 박막은 GZO-Ag-GZO로 이루어진 3개의 sputter gun을 이용하여 Ag 두께를 변수로 연속공정을 통해 제작하였다. 구조적, 표면석 특성 분석을 위해 XRD(X-ray diffraction), FE-SEM(Field emission scanning electron microscopy), HRTEM (High resolution electron microscopy)를 이용하였으며 광학적, 전기적 특성을 분석하기 위해 UV/Vis spectrometer, Hall effect measurement를 각각 이용하였다. 최적화된 GZO 단일 박막은 상온에서 열처리 없이 성막되었음에도 불구하고 38 ohm/sq의 낮은 저항과 86 %의 높은 투과도를 나타내었으며 GAG 다층 박막은 12 nm의 Ag 두께에서 6.4 ohm/sq의 낮은 저항과 88 %의 높은 투과율을 나타내었다. 특히 기계적 특성을 분석하기 위해 진행된 bending test에서 GAG 박막은 초기와 test 후에 저항과 표면에 변화가 없는 우수한 특성을 보였으며 이를 통해 플렉시블 태양전지와 디스플레이등 광학소자의 투명 전극으로서의 적용 가능성을 확인 할 수 있었다.
Appressorial formation of Pyricularia oryzae on leaves showed no marked difference between highly resistant Tongil and susceptible Norm No. 6. Race N-2 of the blast fungus penetrated directly into motor cells of susceptible cultivar Norm No. 6, later extensively spreading hyphae were developed, while in the cultivar Tongil, after penetration, no further hyphal extension resulted. In discoloration of infected tissues, the highly resistant cultivar Tongil not only discolored rapidly, but also the percentage of discolored cells was higher than the susceptible cultivars, Jinheung and Norm No. 6. The respiratory rate, was generally higher in infected tissue than in healthy tissue. No significant difference in the respiration rate of resistant Suwon No. 180 was not found between the infected and healthy leaf tissue, whereas, in susceptible Jinheung, a marked increase in respiratory rate was caused by blast infection. The respiratory rate increased at the appearance of the first visible symptom in all cultivars resistant or susceptible. Higher peroxidase activity was found in infected tissues as compared with healthy tissue. Peroxidase activity increased in resistant and susceptible reactions. Particularly, in resistant reaction, the increase of the activity was more pronounced. In highly resistant reaction, there was no difference in peroxidase activity between healthy and infected tissues. Ascorbic acid oxidase, hydroquinone oxidase and catechol oxidase had the same trend as the peroxidase. In contrast, activity of catalase rather decreased in leaf tissues infected with compatible races of the fungus.
Carbon/carbon (C/C) composites as unique materials possess exceptional thermal resistance with light weight, high stiffness, and strength even at high temperature. However, one serious obstacle for application of the C/C composites is their poor oxidation resistance in high temperature oxidizing environments. SiC coating has been employed to protect the composites from oxidation. This study explored combustion characteristics of 4-directional (4D) carbon/carbon composites using liquid fuel rocket engine to investigate ablative motion of the materials. C/C composites were made of coal tar pitch as a matrix precursor, and heat-treated at $2300^{\circ}C$. Throughout repeated densification process, the density of the material reached $1.903g/cm^3$. After machining 4D C/C composites, the nozzle surface was coated by a SiC layer by pack-cementation method to improve oxidation resistance. Erosion characteristics of SiC-coated C/C composites were measured as function of the ratio of oxygen to fuel. The morphological change of the composites after combustion test was investigated using SEM and erosion mechanism also was discussed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.