• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.982-988
• /
• 2005

An analytic solution of circular aperture antenna with a feed transition is presented using a hybrid method of generalized scattering matrices and integral transform. The method can give an analytic solution to antennas with integrated filters or mode converters, etc. Scattering matrices and integral transform techniques are combined to accommodate discontinuities connected between an aperture and a feed waveguide, and radiated field from the aperture. The method gives radiation fields as well as return losses of the antenna.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.447-450
• /
• 2002

음향수조 내에 일정한 간격으로 배열된 단순 모양의 산란체들로부터 획득된 후방산란 신호를 분석하여 산란체 간격(scatterer spacing)을 추측 할 수 있는 방법을 연구하였다. 수신신호의 산란특성을 켑스트럼 피크(cepstral peaks)를 이용하여 산란체 간격으로 해석하였다. 임펄스 응답신호를 이용한 수치계산으로 산란체 간격 추정방법을 검증한 후, 수조 실험으로 획득한 후방 산란 신호에 적용해 그 결과를 비교해 보았다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.175-178
• /
• 2005

TM plane-wave scattering from finite rectangular grooves in a conducting plane is systematically analyzed with the overlapping T-block method. Multiple rectangular grooves are divided into several overlapping T-blocks to obtain the fast CPU time, CAD applicability, and wide versatility. The scattered fields are obtained in simple closed forms including a fast-convergent integral.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.1-6
• /
• 2003

A theoretical method for the TE polarized electromagnetic scattering on a periodic strip grating over a grounded dielectric slab is considered. The numerical results for an analysis of the plane wave scattering from the structure are presented such as normalized mode amplitude and relative reflected power against normalized dielectric slab height, relative reflected power against angle of incidence and distribution of strip current density. Detailed discussions on the Bragg blazing phenomena observed in the geometry are give.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.148-153
• /
• 2007

In this paper, the evolutionary adaptive wavelet transform(EAWT) is applied to the scattering analysis of radar target. EAWT algorithm uses evolutionary programming for the time-frequency parameter extraction instead of FFT and the bisection search method used in the conventional adaptive wavelet transform(AWT). Therefore, the EAWT has a better performance than the conventional AWT. In the simulation using wire target(Airbus-like), the comparisons with the conventional AWT are presented to show the superiority of the EAWT algorithm in the analysis of scattering phenomenology. The EAWT can be effectively applied to the radar target recognition.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.23-31
• /
• 1994

Sound scattering by cylindrical tubes submerged in water is numerically analyzed with material attenuation considered. Complex wave numbers is introduced to see the effects of material attenuation on resonance scattering Backscattering pressures from the shells immersed in water are calculated for air-filled aluminium and acryl tubes. In order to investigate the resonance characteristics in detail, numerical analysis program has been completed which enables us to evaluate the effects of material attenuation. The testing of the program by comparison with previous results is reported and calculation results are compared and discussed for both aluminium and acryl tubes with material attenuation considered. The resonance peak and width is strongly affected by attenuation and this becomes severe as the peak is sharp and narrow and $k_{1{\alpha}}$ is high.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.333-339
• /
• 1999

It is well recognized that ultrasonic technique is one of the most common and reliable nondestructive evaluation techniques for quantitative estimation of defects in structures. For the quantitative and accurate estimation of internal defects. the characteristics of scattered ultrasonic wavefields must be understood. In this study. the scattered near-field and far-field due to a circular cavity embedded in infinite media subjected to incident SH-waves were calculated by the boundary element method. The frequency response of the scattered ultrasonic far-field was transformed into the time-domain signal by obtaining its inverse Fourier transform. It was found that the amplitude of time-domain signal decreases and its time delay increases as the distance between the detecting point of ultrasonic scattered field and the center of internal cavity increases.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2010

This paper presents a numerical simulation of the radar backscattering from oil spills on ocean surface. At first, a one-dimensionally rough sea surface is numerically generated for a given wind speed at HEBEI SPIRIT accident. Then, an oil-spilled sea surface is represented with a two-layered medium, which is generated by adding a thin low-dielectric oil layer on the randomly-rough highdielectric sea surface. The backscattering coefficients of various oil-spilled sea surfaces are obtained using the Method of Moments and Monte Carlo technique for various surface roughness, oil-layer thicknesses, frequencies, polarizations and incidence angles. The numerical method is verified with theoretical models for simple structures. The reduction of the backscattering coefficients due to the lowdielectric oil-layers on sea surfaces has been analyzed. These numerical results will help to detect any oil spills on sea surfaces, and consequently, to classify SAR images.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.102-109
• /
• 1999

In this paper, Electromagnetic scattering problem by a perfectly conducting strip grating with 2 dielectric layer on a grounded plane by incidence of a electric wave is analyzed by applying the PMM (Point Matching Method) known as a simple procedure. The scattered electromagnetic fields are expanded in a series of Floquet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the conducting boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip When the incident angle is normal incidence the minimum value of the geometrically normalized reflected power according as relative permittivity is increased it should be noted that the value of the strip width gets moved toward high value. Them most energy by a normal incident wave is scattered in direction of the other angles except normal incident angle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.559-565
• /
• 2004

Two different methods were used for the scattering analysis of side-drilled holes(SDH). The scattering models include an explicit model based on the Kirchhoff approximation and the solution of the exact separation of variables. The far-field scattering amplitude was calculated and their time-domain results were compared for the case of shear vertical wave. The exact solution predicts the existence of the creeping wave. The Kirchhoff approximation agreed to the exact solution, except the case of the creeping wave. Two measurement models were introduced to predict the response from the SDHs for the case of immersion, pulse-echo testing. The received voltage was calculated for the case of the shear vertical waves with the incident angle of $45^{\circ}$ to the SDH with the diameter of 1mm, and compared with the experimental results.