• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.397-400
• /
• 2000

초음파 영상의 3차원 구성은 기존의 2차원 영상에서는 얻을 수 없었던 결함의 깊이, 방향성 등의 정보를 획득할 수 있기 때문에 최근에 이에 대한 관심이 고조되고 있다. 본 연구에서는 SAM(Scanning Acoustic Micro-scope)의 각 스펙트럼(angular spectrum) 접근법을 사용하여 물체에서의 3차원 영상 구현 이론에 대해서 연구하였다. 이러한 방법은 초음파 트랜스듀서를 디포커싱 시키면서 얻어진 2차원영상 정보를 이용하여 3차원으로 구성하는 방법이다. 실험에서는 알루미늄 원형 시료를 사용하였고, V(z)이론을 이용하여 산란된 신호에서의 영상을 구현하는 데 초점을 두었다. 모의 실험을 통하여 피사체 중심에 대해서 $70^\circ$ 범위 내에서 반사형 초음파 현미경으로 영상을 얻어낼 수 있음을 확인하였다. 중심주파수가 5MHz이고 대역폭이 $35\%$인 트랜스듀서를 사용하여 원형 시료의 중심부에서의 영상을 얻어내었다

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.51-54
• /
• 2007

Purpose: Total body irradiation is used to kill the total malignant cell and for immunosuppression component of preparatory regimens for bone-marrow restitution of patients. Beam spoiler is used to increase the dose to the superficial tissues. This paper finds the property of the distance between beam spoiler and patient. Materials and Methods: Set-up conditions are 6 MV-Xray, 300 MU, SAD = 400 cm, field size = $40{\times}40cm^2$. The parallel plate chamber located in surface, midpoint and exit of solid water phantom. The surface dose is measured while the distance between beam spoiler and patient is altered. Because it should be found proper distance. The solid water phantom is fixer and beam spoiler is moving. Results: Central dose of phantom is 10.7 cGy and exit dose is 6.7 cGy. In case of distance of 50 cm to 60 cm between beam spoiler and solid water phantom, incidence dose is $14.58{\sim}14.92cGy$. Therefore, The surface dose was measured $99.4{\sim}101%$ with got near most to the prescription dose. Conclusion: In clinical case, distance between beam spoiler and patient affect surface dose. If once $50{\sim}60cm$ of distance between beam spoiler and patient, surface dose of patient got near prescription dose. It would be taken distance between beam spoiler and patient into account in clinical therapy.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.301-307
• /
• 2013

In the present study, space doses generated during X-ray radiography of hand, head, and abdomen, etc. were examined and whether the intensity of space doses of scattering rays is attenuated by the "inverse square law of distance" was figured out. First, the space doses of X-ray with small amounts of generated scattering rays such as hand radiography were mostly attenuated by the "inverse square law of distance" and were not detected at all at a distance of 2m. Second, the space doses of X-ray with large amounts of generated scattering rays such as head or abdomen radiography attenuated in higher rates than the rates under the "inverse square law of distance" at distances ranging from 30cm to 1m from the center of the irradiation field and were attenuated by the "inverse square law of distance" at distances ranging from 1m to 2m. Therefore, in X-ray rooms, the subject should be at least 2m away from the center of the irradiation field in the case of hand radiography and X-ray exposure prevention actions using protective devices are required in the entire spaces of the X-ray rooms in the case of head or abdomen radiography.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.2
• /
• pp.46-55
• /
• 1992

In this paper, A spectral inversion scheme in cylinderical coordinates, appling the moment method procedure is suggested to reconstruct permittivity profiles of inhomogeneous dielectric objects. Angular spectral domain reconstruction is shown to be less sensitive to the ill-posedness due to the noise in the scattered field then the configuration reconstruction

• KOREAN POULTRY JOURNAL
• /
• v.41 no.1
• /
• pp.84-85
• /
• 2009

용인, 화성, 수원 세 지역을 한데 아우르던 수원산란계지부가 역량강화를 위해 용인지역을 중심으로 하는 '용인채란지부'로 재편하면서, 지난 11월 25일 경기도 용인시 용삼면 사암리에 위치한 농업기술센터에서 창립총회를 개최하였다.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.37-42
• /
• 2003

Purpose : Computed tomographic equipment is essential for diagnosis by means of radiation. With passage of time and development of science computed tomographic was developed time and again and in future examination by means of this equipment is expected to increase. In this connection these authors measured rate of scatter ray generation at front of lead glass for patients within control room of computed tomographic equipment room and outside of entrance door for exit and entrance of patients and attempted to ind out method for minimizing exposure to scatter ray. Material and Method : From November 2001 twenty five units of computed tomographic equipments which were already installed and operation by 13 general hospitals and university hospitals in Seoul were subjected to this study. As condition of photographing those recommended by manufacturer for measuring exposure to sauter ray was use. At the time objects used DALI CT Radiation Dose Test Phantom fot Head (${\oint}16\;cm$ Plexglas) and Phantom for Stomache(${\oint}32\;cm$ Plexglas) were used. For measurement of scatter ray Reader (Radiation Monitor Controller Model 2026) and G-M Survey were used to Survey Meter of Radical Corporation, model $20{\times}5-1800$, Electrometer/Ion Chamber, S/N 21740. Spots for measurement of scatter ray included front of lead glass for patients within control room of computed tomographic equipment room which is place where most of work by gradiographic personnel are carried out and is outside of entrance door for exit and entrance of patients and their guardians and at spot 100 cm off from isocenter at the time of scanning the object. The results : Work environment within computed tomography room which was installed and under operation by each hospital showed considerable difference depending on circumstances of pertinent hospitals and status of scatter ray was as follows. 1) From isocenter of computed tomographic equipment to lead glass for patients within control room average distance was 377 cm. At that time scatter ray showed diverse distribution from spot where no presence was detected to spot where about 100 mR/week was detected. But it met requirement of weekly tolerance $2.58{\times}10^{-5}\;C/kg$(100 mR/week). 2) From isocenter of computed tomographic equipment to outside of entrance door where patients and their guardians exit and enter was 439 cm in average, At that time scatter ray showed diverse distribution from spot where almost no presence was detected to spot with different level but in most of cases it satisfied requirement of weekly tolerance of $2.58{\times}10^{-6}\;C/kg$(100 mR/week). 3) At the time of scanning object amount of scatter ray at spot with 100 cm distance from isocenter showed considerable difference depending on equipments. Conclusion : Use of computed tomographic equipment as one for generation of radiation for diagnosis is increasing daily. Compared to other general X-ray photographing field of diagnosis is very high but there is a high possibility of exposure to radiation and scatter ray. To be free from scatter ray at computed tomographic equipment room even by slight degree it is essential to secure sufficient space and more effort should be exerted for development of variety of skills to enable maximum photographic image at minimum cost.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.147-150
• /
• 2009

본 논문에서는 해상 클러터를 고려하여 움직이는 물체의 SAR 원시 데이터를 생성하고, SAR 원시 데이터 중간 처리 결과인 range 압축 데이터의 azimuth 차분 신호로부터 물체의 속도를 측정하는 방법을 여러 가지 환경에 적용하여 그 정확도 및 적용 가능한 경우를 분석하였다. 움직이는 물체에 의한 도플러 중심 주파수의 변이가 azimuth 차분 신호에서 위상의 변화를 가져오므로, 이를 이용하여 움직이는 물체의 속도를 측정하는 알고리듬을 정리하였다. 이 알고리듬을 위에서 생성한 range 압축 데이터에 적용하여, 타깃이 되는 물체가 독립적으로 존재하는 경우, azimuth 상에 또 다른 속도를 가지는 산란체가 존재하는 경우, 그리고 높은 후방산란계수를 가지는 육지에 타깃이 되는 물체가 인접해 있는 경우를 가정하여 속도를 측정하였다. 그 결과, 타깃이 되는 물체가 SAR 영상에서 256 픽셀 범위 내에서 독립적으로 존재할 경우에는 높은 정확도로 물체의 속도를 측정할 수 있었으나, 128 픽셀 범위에 다른 움직이는 물체가 존재하거나, 높은 후방산란 계수를 갖는 육지와 인접해 있을 경우에는 최대 1m/s 의 오차를 나타냈다. 이는 주변 산란체의 영향에 의해 신호가 교란되어 목표물의 위치를 추정하는 과정에서 오차가 발생했기 때문이다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.97-108
• /
• 1997

Variation of the catches and fishing grounds, and spawning ecology of Lophius litulon caught by large staw net were investigated from following as ; L. litulon caught through the year, and the peak in catches showed on January in winter, and the lowest catches showed on August in summer. The fishing grounds of L. litulon were located in the Yellow Sea and the East China Sea. And the main fishing ground was formed in the adjacent waters of Ilhyang-cho, where catches and CPUE were more than 50 M/T, 5 kg/haul, respectively, and the range of coefficient of variation(C.V) was 0.6~0.7. The spawning season of L. litulon was on March and April, when spawning area was formed in waters between Ilhyang-Cho and Cheju-Do. The fishing grounds distribution of L. litulon was obviously different with seasonal variation. Namely, in winter, the fishing grounds were mainly formed in the western waters of Cheju-Do, and on March and April( in spawning season), the fishing grounds were densely formed in the adjacent waters of Ilhyang-Cho, and after May, the fishing grounds were widely dispersed towards in the Yellow Sea and the East China Sea with temperature upgrade.

• Journal of the Korean Society of Radiology
• /
• v.10 no.1
• /
• pp.15-19
• /
• 2016

This Study aims at measuring scattered rays depending on the use of a flattening filter when radiation is irradiated using a linear accelerator. measurement of the scattered rays, an ionization chamber was used, and the energy of the irradiated radiation was 6 MV and 10 MV. The ionization chamber was located at the spot 15 cm, 25 cm, 35 cm and 45 cm far away from the center of gantry rotation, and the scattered rays were measured according to whether a flattening filter was used or not and to the distance. As the result of investigation of 100 cGy about each energy, when the flattening filter was not used with 6 MV, it occurred at a low level of 65%, and with 10 MV at that of 55%. In other words, it's been concluded that when a flattening filter is not used for radiation dose of the parts around the critical organ, scattered rays generate in a small quantity, and it's a useful way to decrease the stochastic effect of radiation.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.16-22
• /
• 2012

In this study, we setup a ground-based scatterometer using an antenna of which the center frequency is 9.5 GHz (X-band), and measured radar backscatterings from air/ice and ice/water interfaces to extract ice thickness. Both of air/ice and ice/water interfaces make strong radar backscatterings and so we can clearly identify two peaks in measured data by scatterometer. By using the distance of two peaks and refractive index of ice, we confirmed that it is possible to measure ice thickness. Field survey was performed at the downstream of Jiam River flowing into Chuncheon Lake. We measured radar backscattering from river ice along a survey path and extracted ice thickness. The ice thickness map of the downstream of Jiam River was produced by using kriging which is one of well known interpolation methods. The ice thickness was about 50 cm along the mainstream while ice was thin as 30 ~ 40 cm at a fast-flowing meander. Ice thickness was particularly thinner at some locations than that of surrounding areas even in the mainstream region of constant flow. This was because of impurities in ice or artificially formed refrozen holes after fishing. We expect that this study helps to expand utilization field of X-band SAR and airborne scatterometer system.