• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.139-148
• /
• 2009

Purpose: Ultrasonic scalers have been widely used for removing biofilm which is considered as major etiologic factor of periodontal disease. The purpose of this study was to evaluate the effect of working parameters of piezoeletric ultrasonic scaler with scaler tip (No. 1 tip) on casting gold alloy removal. Methods: Type III dental casting gold alloy (Firmilay$^{circledR}$, Jelenko Inc, CA, USA) was used as substitute for tooth substance. Piezoeletric ultrasonic scaler and No.1 scaler tip (P-Max$^{circledR}$, Satelec, France) were selected. The selected working parameters were mode (P mode, S mode), power setting (2, 4, 8) and lateral force (0.5 N, 1.0 N, 2.0 N). The effect of working parameters was evaluated in terms of ablation depth, ablation width and ablation area. Results: Mode influenced ablation depth and ablation area. Power also influenced ablation depth and ablation area. Especially, Power 2 and power 8 showed statistically significant difference. Lateral force had influence on ablation width, and 0.5 N resulted significant increase compared with 1.0 N and 2.0 N. Ablation depth was influenced by mode, power and lateral force and defect width was influenced by lateral force. Ablation area was influenced by mode and power. Conclusions: It can be concluded that the use of piezoelectric ultrasonic scaler with No. 1 scaler tip in S mode and high power may result in significant loss of tooth substance.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.531-542
• /
• 2001

Periodontal debridement is most important procedure in periodontal treatment, because periodontal disease is the biofilm infection. The use of ultrasonic instrument has many clinical advantages compared to classical hand instrument. The introduction of newly developed ultrasonic scaler tips made the use of ultrasonic scaler popular. However the study of tooth substance removal according to the working parameters of ultrasonic scaler with newly developed tips is not sufficient. The purpose of this study is to evaluate the effects of working parameters of piezoelectric ultrasonic scaler with curette tip on casting gold removal. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1.0 N, 2.0 N) and power setting was adjusted 2, 4, 8 in P mode and S mode and instrumentation time was 5 seconds. The defect depth and width were measured with profile meter and defect surface was examined by SME. The depth of defect was significantly large in S mode( $39.58{\pm}19.35{\mu}m$) compared to P mode( $8.37{\pm}6.98{\mu}m$). There was significant decrease of depth of defect between 1.0N($32.87{\pm}27.18{\mu}m$) and 2.0N( $14.86{\pm}15.04{\mu}m$). The area of defect was also significantly large in S mode($4482.42{\pm}3551.71{\mu}m^2$) compared to P mode( $922.06{\pm}960.32{\mu}m^2$). There was significant decrease of area of defect between 1.0N($3889.12{\pm}3936.00{\mu}m$) and 2.0N( $974.66{\pm}986.01{\mu}m$). The change of mode did not effect on the width of the defect. The change of power setting did not effect on the depth, width, and area of defect. In spite of limitation of this study it could be concluded that the use of piezoelectric ultrasonic scaler with curette tip on S mode could make significant tooth substance loss.

• Journal of Periodontal and Implant Science
• /
• v.39 no.4
• /
• pp.385-390
• /
• 2009

Purpose: In this study we evaluated the morphologic aspects of defects created by a piezoelectric ultrasonic scaler with scaler tip on casting gold alloy using scanning electron microscope (SEM) images and defect surface profiles. Methods: 54 blocks of type III casting gold alloy (Firmilay, Jellenko Inc, CA, USA) were scaled by a piezoelectric ultrasonic scaler (P-MAX, Satelec, France) with scaler tip (No. 1 tip) on a sledge device. 2-dimensional profiles of defects on all samples were investigated by a surface profilometer (a-Step 500, KLA-Tencor, CA, USA). The selected working parameters were lateral force (0.5 N, 1.0 N, 2.0 N), mode (P mode, S mode), and power setting (2, 4, 8). SEM images were obtained. Defect surface profiles were made on Microsoft Excel program using data obtained by a surface profilometer. Results: Among P mode samples, there were similarities on defect surface profiles and SEM images regardless of lateral force. The defects created in P mode were narrow and shallow although the depth and the width increased as power setting changed low (2) to high (8). In P mode samples, the defect depth was the greatest when lateral force of 0.5 N was applied. However all the depths were smaller than 1 m. SEM images of Lateral force of 0.5 N, S mode, power setting 2 and 4 were similar to that of P mode, but the other SEM images of S mode showed discernible changes. Defect depth of S mode samples was the greatest when lateral force of 1.0 N was applied. Conclusions: Within the limitations of this study, it can be concoluded that removing capability of piezoelectric scaler with scaler tip becomes maximized as power level becomes higher but the capability is restricted when excessive lateral force is applied on scaler tip.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.264-269
• /
• 2012

Die slide injection marvelously reduces the cost and time in processing plastic products because they can simplify the conventional process through eliminating additional process. However, this process must resolve some defects like whitening, resin infiltration, blowhole, resin overflow, etc. In this study, the process parameters of the injection molding are optimized by using the finite element method and Taguchi method. The injection molding analysis is simulated by employing the Moldflow insight 2010 code and the 2nd injection is by adopting the Multi-stage injection code. The process parameters are optimized by using the $L_{16}$ orthogonal array and smaller-the-better characteristics of the Taguchi method that was used to produce an airtight container (coolant reservoir tank) from polypropylene (PP) plastic material.rodanwhile, the optimum values are confirmed to be similar in 95% confidence and 5% significance level through analysis of variance (ANOVA). rooreover, new products and old products were compared by mdasuring the dimensional accuracy, resulting in the improvement of dimensional stability more than 5%.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.339-345
• /
• 1994

Deletions between UASG and the GALI TATA box reduced glucose repression and allowed constitutive expression of the gene product in the absence of galactose. The relative inducer level (ratio of galactose/glucose concentrations) affected the extent of gene expression and glucose repression. Glucose repression was reduced by a factor of 2 to 5 as the relative inducer level increased. In the medium containing galactose only, induction of ${\beta}$-galactosidase synthesis by galactose increased with plasmid copy number. On the contrary, plasmid copy number did not affect significantly ${\beta}$-galactosidase synthesis in the medium containing both glucose and galactose (2% glucose＋2% galactose), which might be due to glucose repression caused by high glucose concentration. However, when the medium contained the relatively high inducer level (0.4% glucose＋0.8% galactose), ${\beta}$-galactosidase synthesis increased with plasmid copy number, indicating that the beneficial effect of higher galactose concentration was weaker than the repressive effect of higher glucose concentration.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.1-8
• /
• 2009

Detecting entry and exit zones in a view covered by multiple cameras is an essential step to determine the topology of the camera setup, which is critical for achieving and sustaining the accuracy and efficiency of multi-camera surveillance system. In this paper, a graph theoretic clustering method is proposed to detect zones using data points which correspond to entry and exit events of objects in the camera view. The minimum spanning tree (MST) is constructed by associating the data points. Then a set of well-formed clusters is sought by removing inconsistent edges of the MST, based on the concepts of the cluster balance and the cluster density defined in the paper. Experimental results suggest that the proposed method is effective, even for sparsely elongated clusters which could be problematic for expectation-maximization (EM). In addition, comparing to the EM-based approaches, the number of data required to obtain stable outcome is relatively small, hence shorter learning period.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.639-643
• /
• 2008

Since seasonal changes, blooming of a flower, etc., which take place in accordance with passage of time, transpire over an extended duration of time, one performs the Time-Lapse so that one can watch them quickly by compressing time. Because such a Time-Lapse records a wide range of conditions including the place, angle of view, and time found in a natural state in accordance with a precise interval of time and in the samestate, it is also referred to as Interval recording. The Time-Lapse technique is used widely in various fields such as education, science, documentary, and the media. In terms of acquiring a Time-Lapse image, by making it possible for one to treat an image by deleting and adjusting unnecessary backgrounds excluding the main subject for photography such as the flower unlike existing methods and by making it possible for one to apply extensively the real-life recorded image as a library or image data in 2D or 3D, the present study seeks to propose a technique for the background treatment of Time-Lapse image that allows for everyone to bestow creativity to image production easily and conveniently.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.79-90
• /
• 2022

'Trust' is 'believing and relying on people or things', and at the same time, it is the foundation and essential condition of existence of a specific community or society. How blockchain technology creates trust can be found in the fact that it is a technology shared by all participants. As a shared technology, blockchain itself shows three characteristics: transparency, immutability, and availability. Because it is shared, it is transparent, and because it is shared, it is immutable, which is difficult to modify or delete. In addition, since it is shared, the entire system operates normally even if some failure occurs. The significance of trust created based on this blockchain technology can be summarized in three aspects as follows. The first is to understand the problem of trust in connection with technology. Second, understanding the relationship between information and trust begins to pay attention. Third, based on the expanded information processing capability, it is possible to establish a large-scale, concrete relationship without central mediation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1295-1299
• /
• 2006

횡월류위어는 홍수 피해 경감을 위해 계획되는 방수로나 저류지의 유입부에 주로 사용된다. 따라서 이러한 횡월류위어를 통해 방수로나 저류지로 월류되는 월류량을 정확히 예측하는 것은 이러한 시설의 홍수 피해 경감 능력을 예측하는데 있어 매우 중요하다. 횡월류위어를 통해 흐르는 흐름은 매우 복잡하기 때문에 일반적으로 이러한 흐름을 분석하는 것은 매우 어렵다. 따라서 대부분의 횡월류위어 유량계수 공식은 De Marchi의 해석해와 다양한 실험 자료에 근거하여 제시되고 있다. 따라서 지금까지 횡월류위어 유량계수에 대하여 많은 공식이 제안되어 왔지만, 대부분의 공식이 유사한 형태를 가지고 있으며, 횡월류위어의 상류에서의 프루드수$(Fr_1)$를 제일 중요한 설계 인자로 고려하고 있다. 그러나 최근 횡월류위어에 대한 연구가 점차 발전됨에 따라 횡월류위어 상류에서의 프루드수 외에도 위어높이와 횡월류위어 상류 수심의 비(h/y), 그리고 횡월류위어의 길이와 본류 폭의 비(L/B) 등이 고려되고 있다. 그 중에서 L/B 의 효과는 점차 중요하게 고려되고 있다. 그러나 대부분의 연구자들이 사용한 실험 장비들은 상 대적으로 높은 L/B 조건을 가지는데 반하여, 현재 국내에서 계획되고 있는 천변저류지 등에 설계된 횡월류위어의 설계 범위는 대체로 $1/10{\sim}1/200$이므로 기존 연구자들의 실험 범위와 매우 다르다고 할 수 있다. 따라서 본 연구에서는 상대적으로 폭이 넓은 실험 수로를 이용하여 횡월류예연위어의 유량 계수에 대한 실험을 수행하였다. 지금까지의 실험 결과에 의하면 동일한 실험 조건에 대해서 기존 연구자들에 의해서 제안된 공식으로 계산한 유량계수 보다 측정된 자료를 이용하여 계산한 유량계수의 값이 상대적으로 더 큰 것 으로 나타났다. 통해 배수될 때 암석이 머금고 있는 물로 인해 추가적으로 발생하는 중력은 다른 재료가 가지지 못한 화산석의 또 다른 장점이라 할 수 있다.서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.135-139
• /
• 2017

The main reason for heat accidents occurring at the after stern tube bearing (STB) is excessive local pressure caused by the deflection of the propulsion shaft due to propeller loads. The probability of a heat accident is increased by the low flexibility of the shaft system in very large crude oil carriers (VLCCs) as the engine power and shaft diameter increase and the distance decreases between the forward and after STBs. This study proposed shaft system with only an after STB and no forward STB for a flexibility acquisition method for a VLCC shaft system under hull deformation. A Hertzian contact condition was applied, which assumes a half-elliptical pressure distribution along the contact width for the calculation of the local squeeze pressure. The propeller loads, heat effect, and hull deflection under engine operating conditions are also considered. The results show that the required design criteria were satisfied by building a partial slope at the white metal, which is the material at the axial contact side in the after STB. This system could reduce building cost by simplification of the shaft system.