• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.232-239
• /
• 2009

The aim of this study was to compare the effects of anti curvature filing with stainless steel k-file versus nickel-titanium ProFile in the shaping of mesial root canals of extracted mandibular molars. A total of 60 canals from 30 mesial roots of mandibular molar teeth were randomly assigned to three groups with n=20 each. They were prepared with different instruments and methods: The first group with stainless steel k-file and circumferential filing. the second with precurved stainless steel k-file and anticurvature filing and the third with ProFile C06 taper) and anticurvature filing. Using a micro-computed tomography system (skyscan-1076, SKYSCAN, Antwerpen, Belgium), pre-and post-operative specimens were scanned. Subsequently, canal images were superimposed and changes in root dentin thickness were measured at distal side (danger zone) of the canal. The data was analyzed using a one-way ANOVA and the comparison of means was conducted using a post hoc multiple comparison Tukey test. There were significant differences in the change of root dentin thickness at the $7.5{\sim}8.5\;mm$ level between group 1 and 2, $3.5{\sim}6mm$ level between group 1 and 3 and $3.5{\sim}6mm$ level between group 2 and 3(n=20, P<0.05).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.1
• /
• pp.125-134
• /
• 2016

MySQL database is currently used by many users and It has gained a big market share in the database market. Even though MyISAM storage engine was used as a default storage engine before, but records recovery method does not existed. Deleted records have a high possibility for important evidence and it is almost impossible to determine that investigators manually examine large amounts of database directly. This paper suggests the universal recovery method for deleted records and presents the experimental results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.384-393
• /
• 2015

This paper proposes an optimized classifier based on feature elimination (OCFE) for gene selection with combining two feature elimination methods, ReliefF and SVM-RFE. ReliefF algorithm is filter feature selection which rank the data by the importance of the data. SVM-RFE algorithm is a wrapper feature selection which wrapped the data and rank the data based on the weight of feature. With combining these two methods we get less error rate average, 0.3016138 for OCFE and 0.3096779 for SVM-RFE. The proposed method also get better accuracy with 70% for OCFE and 69% for SVM-RFE.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.171-173
• /
• 1999

공간 데이터베이스에서 사용되는 데이터는 그 양이 방대하고 복잡하여 이를 효율적으로 저장, 관리하는 색인이 필요하다. 여러 공간 색인 방법들 중에서 R-tree는 삽입과 삭제가 빈번히 발생하는 동적인 환경에서 효율적인 질의 성능을 보이는 것으로 알려져 있다. R-tree는 삽입되는 데이터의 순서에 따라 트리의 구조가 달라질 수 있는데, 주어진 데이터가 수정이 자주 발생하지 않는다며 데이터 입력 순서를 결정하여 질의 성능이 가장 좋은 트리를 구성할 수 있다. 본 논문에서는 데이터가 자주 수정되지 않는 환경에서 노드간의 중첩을 가장 최소화 할 수 있는 데이터 입력 순서를 결정하기 위해 클러스터링을 이용한 새로운 방법인 CSR-tree를 제안하고자 한다. CSR-tree는 일반 R-tree와 hilbert packed R-tree 방법보다 향상된 질의 성능을 보인다.

• The monthly packaging world
• /
• s.362
• /
• pp.108-111
• /
• 2023

제품의 포장재질·포장방법에 관한 기준 등에 관한 규칙(환경부령 제1032호)이 지난 4월 17일자로 공포(시행) 됐다. 해당 법령에는 규제 재검토기한 정비를 위한 17개 법령의 일부개정에 관한 내용을 담고 있다. 특히 제11조 (「제품의 포장재질·포장방법에 관한 기준 등에 관한 규칙」의 개정) 제품의 포장재질·포장방법에 관한 기준 등에 관한 규칙 일부를 개정하였으며, 제12조 각 호 외의 부분 중 "하여야"를 "해야"로 수정하고, 같은 조 제3호를 삭제하였다. 해당 규칙은 공포한 날인 2023년 4월 17일부터 시행되고 있다. 법령 전문과 함께 개정된 상세 내용을 살펴보도록 한다.

• Journal of the KSME
• /
• v.18 no.4
• /
• pp.35-40
• /
• 1978

여기서 상기 ASME Code에 대하여 간단히 설명하기로 한다. ASME Code 는 첫부분에서 ASME Code의 적용을 받아야 하는 압력용기를 정의하고, 압력용기의 건설에 관한 일반원칙을 설명한후 그 다음에는 세개의 Subsection으로 나뉘어져 있다. 즉 Subsection A General Requirements Subsection B Requirements Pertaining to Methods of Fabrication of Pressure Vessels Subsection C Requirements Pertaining to Classes of Material 여기서 Subsection A는 압력용기 재료나 제작방법의 상위와 관계없이 적용하여야 할 일반적인 요구사항을 규정한 것이며, Subsedction B에서는 압력용기의 제작방법을 용접,리벳팅,단조,경납 땜의 4가지로 나누어 각 제작방법에 따른 특수 요구사항을 규정하였고, 마지막으로 Subsection C 는 재료에 따른 특수 요구사항을 규정한 것이다. 이 각 Subsection은 다시 General, Materials, Design, Fabrication, Inspection and Tests, Stamping and Reports, Pressure Relief Devices로 나누어 이에 대한 각각의 요구사항들을 설명하고 있다. 그러나 이 기술기준에서는 제정방향으로, 다음의 목차에서도 알 수 있는 바와 같이 이들의 순서를 바꾸어 총칙,재료,설계,제작, 검사 및 시험, 압력릴리프장치를 배치한 후 이미 KS B 6231에 제정되어 있는 것은 그 규정을 대부분 그 대로 인용하였고, 그렇지않은 것은 우리의 실정을 참작하여 삭제, 보완, 수정하였다. 삭제한 내용 중 대표적인 것으로 공인검사관(Authorized Inspector) 및 Stamping and Reports 에는 9개의 Mandatory Appendix 와 16개의 Nonmandatory Appendix가 있는데, 이둘 중 이 기술기준에서 필요하다고 생각되는 것은 발췌 수록하였다. 단위에 대해서는 국가시책에 따라 메트릭 시스템을 사용하였고 단위의 환산에서 야기되는 소수점등의 처리는 공학적인 판단에 의거하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.159-164
• /
• 2022

The linear assignment problem (LAP) and linear bottleneck assignment problem (LBAP) has been unknown the algorithm to solve the optimal solution within polynomial-time. These problems are classified by NP-hard. Therefore, we can be apply metaheuristic methods or linear programming (LP) software package or Hungarian algorithm (HA) with O(m⁴) computational complexity. This paper suggests polynomial time algorithm with O(mn)=O(m²),m=n time complexity to LAP and LBAP. The select-delete method is simply applied to LAP, and the delete-select method is used to LBAP. For the experimental data without the unique algorithm can be apply to whole data, the proposed algorithm can be obtain the optimal solutions for whole data.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.59-72
• /
• 2006

The rapid growth of technology for network and terminal devices is able to service multimedia contents in mobile environments. But as the environment of networks and the performance of devices is varied, the same quality service is very difficult to be provided for user in internet and mobile environment. Therefore, multimedia streaming system must provide an adaptive service in considering network and device environment. Video transcoding techniques are the good solution that can provide video streaming service in various network environments adaptively. This paper proposes a dynamic frame-skipping transcoding scheme to provide adaptive streaming service in various network environments. This scheme uses the prediction period for transcoding. A proposed transcoding scheme can reduce time complexity through combination of prediction period and skipping period to control frame-skipping rate in encoder. In simulation results, the performance of proposed scheme is similar to the performance of a traditional dynamic frame-skipping scheme in PSNR value. But the performance of proposed scheme outperforms the performance of traditional scheme in time complexity.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.573-583
• /
• 2015

Amcache.hve file is a registry hive file regarding Program Compatibility Assistant, which stores the executed information of applications. With Amcache.hve file, We can know execution path, first executed time as well as deleted time. Since it checks both the first install time and deleted time, Amcache.hve file can be used to draw up the overall timeline of applications when used with the Prefetch files and Iconcache.db files. Amcache.hve file is also an important artifact to record the traces of anti-forensic programs, portable programs and external storage devices. This paper illustrates the features of Amcache.hve file and methods for utilization in digital forensics such as estimation of deleted time of applications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.683-693
• /
• 2001

The purpose of this study was to evaluate the effects of Er:YAG laser on cutting efficacy and its histologic findings. Dentin specimens of human premolars and molars were used and irradiated by Er:YAG laser with noncontact handpiece type delivery system under different treatment condition of irradiation time. Cavity pattern and volume were evaluated to determine the cutting efficacy and following results were obtained. 1. Cutting volume of sound dentin was getting larger with time immersed in water increase 2. With the condition of irradiation (150mJ, 10Hz, 30sec), surface irregularity was more increased in sound dentin comparing to carious dentin. For the light microscopic examination, dentinal tubules were opened and ash flecks and cracks were noted with inconsistence of dentinal tubules. 3. In case of 30 sec. irradiation in carious dentin, dark zone was limited to small focus whereas 1 min. irradiation, more wider, and cracks were noted in the perpendicular to direction of dentinal tubules. For the 2 min. irradiation, cavity was the widest and more cracks were found.