• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.183-192
• /
• 1982

The variability of rice productivity during last 2 decades (1961-1980) of ten years before and after the introduction of"Tongil" was reviewed from the epochal, regional and varietal points of view. During that period the cultivated area of paddy rice have remained almost unchanged, while the total rice production have got elevated from 3, 463 million metric tons in 1961 to 6.006 million metric tons in 1977, recording 73.4% increase. This remarkable increase in rice production is considered to be attributable much to the development and release of new high yielding variety, "Tongil", coupled with the amelioration of cultural techniques. However, in 1978 Tongil type varieties experienced the epidemic outbreak of blast disease due to the shifted race population of blast fungus and in 1980 recorded poor rice production as low as in 1960's due to the unfavorable weather stress throughout the rice growing season, giving rise to many problems awaiting solutions for securing the stabilized high production of rice. The rice yield has continued the gradual increase during last two decades but its difference between farmer and research organization have got wider from 79kg/10a during 1960 to 1971 to 101kg/l0a during 1972 to 1980, and also the inter-regional differences have been increased from 50-60kg/10a to 80kg/10a during those periods. Therefore, this proves that we have raised the upper boundary of rice yield by increasing the yield potential of rice variety but have not changed those absolute deviations. Estimates indicate that the increased rice production during that period was indebted 40 percent to the varietal improvement and 13 percent to the ameliorated agro-technologies, and the rest, 47 percent, could be ascribed to the other factors besides varieties and cultural technologies such as the improved agricultural environments, etc. Of course, even though it cannot be expected to unify the cultural environments and the cultural technologies, provided that much efforts are to be endeavored to minimize the yield difference of 20 percent between farmer and research organizations and the inter-regional yield difference of 20 percent, much increased rice production can be expected to be achieved with the current level of cultural technology and the yielding potential of the present rice varieties. In order to expedite the above effects on rice production the followings are to be put into practices consitently and steadfastly. 1. Reinforcement of breeding for varieties with high yielding potential and less susceptible to climatic-stress and pests, and of basic physicoecological studies of rice plant for improving the cultural technologies. 2. Continuous endeavor to secure the stabilized cultural environments by improving the soil fertility and increasing the drainage and irrigation facilities. 3. Political back-up to encourage the farmers' incentives for production 4. Precise surveys for agricultural statistics to facilitate the long-term planninge long-term planning.

• Archives of design research
• /
• no.16
• /
• pp.41-51
• /
• 1996

A matter of primary concern about all design is concentrated on how to create more valuable things to allow people to live an affluent life. However, it is very difficult to achieve the goal because every design work is changed in accordance with given situatio ns. In this sense, it is significant to study on biodesign because it can be both a basic principle and a fudamantal index to show the way of new design direction. Accordingly, the main purpose of the thesis is to catch every meaning of bio-design and to close analyze its factors in order to generate more fresh ideas and put them into practice. The thesis is composed of five Chapters: Introduction, Background of bio-design, Principle of bio-design, Practice of bio-design, and Conclusion. In Introduction, the purpose and background of the study are presented. I n Chapter 2, source of design orgin, vernacular design, and design for life are researched. In Chapter 3, organic order. the survial of the fittest, and subjective & objective are considered. In Chapter 4, hi-tech & hi-touch, criteria of problem -solving, and harmony with nature are searched. In Conclusion, some suggestive words on the study are mentioned.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1089-1121
• /
• 2017

'Technological convergence' is the recent innovation trend which facilitates to solve social crux as well as to generate new industries. Korean government research institutes (GRIs) have taken a pivotal role for economic growth which capitalized on technology-oriented strategies. Recently, the policy interests on the transition of their role and mission towards multidisciplinary research organization is increasingly shed lights. This study regards the collaborative activities as one of the key success factors in the multidisciplinary research. In this sense, this study sets research purposes as follows: First, we intend to define a concept and to confine a scope of multidisciplinary research from the view point of R&D purposes and problem-solving process. Second, we categorize the collaboration and the relevant performances which reflect the characteristics of the multidisciplinary research. Third, we analyze the characteristics of collaborative activities and the effects of strength on the research performances. To this end, this study conducted a survey of 104 research project directors, which have experienced at least one of two types of multidisciplinary research projects through National R&D project or NST (National Research Council of Science & Technology) convergence research project. Then, we conducted regression analysis by utilizing the survey results in order to verify the relation between the collaborative activities and the performances. As results of analyses, first, the diversification of collaboration partners was a salient factor in the process of knowledge creation. Second, collective works among the researchers in similar area and domain enhanced mission-oriented technology development projects such as patent creation or technology transfer. Third, we verified that the diversity of created knowledge and the degree of relation continuity between researchers increased in the condition of guaranteeing individual researcher's independence and autonomy as well as sharing various technological capabilities. These results provide the future policy directions related to the methods to measure the collaboration and performance analysis for multidisciplinary research.

• Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.218-224
• /
• 2000

The efforts were made to optimite ethanol extraction from persimmon leaf with the time of extraction$(1.5{\sim}2.5\;hrs)$, the temperature of extraction$(70{\sim}90^{\circ}C)$, and the concentration of ethanol$(0{\sim}40%)$ as three primary variables together with several functional characteristics of persimmon leaf as reaction variables. The conditions of extraction was best fitted by using response surface methodology through the center synthesis plan, and the optimal conditions of extraction were established. The contents of soluble solid and soluble tannin went up as the concentration of ethanol went up and the temperature of extraction went down, and the turbidity went down as the concentration of ethanol went down. Electron donation ability was hardly affected by the extraction temperature and had the tendency to go up as the concentration of ethanol went up. The inhibitory activity of xanthine oxidase(XOase) had the tendency to go up as both the concentration of ethanol and the temperature of extraction went up. The inhibitory activity of angiotensin converting enzyme(ACE), the significance of which still was not recognized, showed the maximum when the concentration of ethanol was 27%. In result, the optimal conditions of extraction was the extraction time of two hours, the extraction temperature of $75{\sim}81^{\circ}C$, and the ethanol concentration of $33{\sim}35%$.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.65-82
• /
• 2015

Recently, there has been a surge of interest in finding core issues and analyzing emerging trends for the future. This represents efforts to devise national strategies and policies based on the selection of promising areas that can create economic and social added value. The existing studies, including those dedicated to the discovery of future promising fields, have mostly been dependent on qualitative research methods such as literature review and expert judgement. Deriving results from large amounts of information under this approach is both costly and time consuming. Efforts have been made to make up for the weaknesses of the conventional qualitative analysis approach designed to select key promising areas through discovery of future core issues and emerging trend analysis in various areas of academic research. There needs to be a paradigm shift in toward implementing qualitative research methods along with quantitative research methods like text mining in a mutually complementary manner. The change is to ensure objective and practical emerging trend analysis results based on large amounts of data. However, even such studies have had shortcoming related to their dependence on simple keywords for analysis, which makes it difficult to derive meaning from data. Besides, no study has been carried out so far to develop core issues and analyze emerging trends in special domains like the aviation industry. The change used to implement recent studies is being witnessed in various areas such as the steel industry, the information and communications technology industry, the construction industry in architectural engineering and so on. This study focused on retrieving aviation-related core issues and emerging trends from overall research papers pertaining to aviation through text mining, which is one of the big data analysis techniques. In this manner, the promising future areas for the air transport industry are selected based on objective data from aviation-related research papers. In order to compensate for the difficulties in grasping the meaning of single words in emerging trend analysis at keyword levels, this study will adopt topic analysis, which is a technique used to find out general themes latent in text document sets. The analysis will lead to the extraction of topics, which represent keyword sets, thereby discovering core issues and conducting emerging trend analysis. Based on the issues, it identified aviation-related research trends and selected the promising areas for the future. Research on core issue retrieval and emerging trend analysis for the aviation industry based on big data analysis is still in its incipient stages. So, the analysis targets for this study are restricted to data from aviation-related research papers. However, it has significance in that it prepared a quantitative analysis model for continuously monitoring the derived core issues and presenting directions regarding the areas with good prospects for the future. In the future, the scope is slated to expand to cover relevant domestic or international news articles and bidding information as well, thus increasing the reliability of analysis results. On the basis of the topic analysis results, core issues for the aviation industry will be determined. Then, emerging trend analysis for the issues will be implemented by year in order to identify the changes they undergo in time series. Through these procedures, this study aims to prepare a system for developing key promising areas for the future aviation industry as well as for ensuring rapid response. Additionally, the promising areas selected based on the aforementioned results and the analysis of pertinent policy research reports will be compared with the areas in which the actual government investments are made. The results from this comparative analysis are expected to make useful reference materials for future policy development and budget establishment.

• Proceedings of the KOR-KST Conference
• /
• 1995.12a
• /
• pp.45-73
• /
• 1995

The current paper presents a system dynamics model which can generate the land use anq transportation system performance simultaneously is proposed. The model system consists of 7 submodels (population, migration of population, household, job growth-employment-land availability, housing development, travel demand, and traffic congestion level), and each of them is designed based on the causality functions and feedback loop structure between a large number of physical, socio-economic, and policy variables. The important advantages of the system dynamics model are as follows. First, the model can address the complex interactions between land use and transportation system performance dynamically. Therefore, it can be an effective tool for evaluating the time-by-time effect of a policy over time horizons. Secondly, the system dynamics model is not relied on the assumption of equilibrium state of urban systems as in conventional models since it determines the state of model components directly through dynamic system simulation. Thirdly, the system dynamics model is very flexible in reflecting new features, such as a policy, a new phenomenon which has not existed in the past, a special event, or a useful concept from other methodology, since it consists of a lots of separated equations. In Chapter I, II, and III, overall approach and structure of the model system are discussed with causal-loop diagrams and major equations. In Chapter V _, the performance of the developed model is applied to the analysis of the impact of highway capacity expansion on land use for the area of Montgomery County, MD. The year-by-year impacts of highway capacity expansion on congestion level and land use are analyzed with some possible scenarios for the highway capacity expansion. This is a first comprehensive attempt to use dynamic system simulation modeling in simultaneous treatment of land use and transportation system interactions. The model structure is not very elaborate mainly due to the problem of the availability of behavioral data, but the model performance results indicate that the proposed approach can be a promising one in dealing comprehensively with complicated urban land use/transportation system.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.235-261
• /
• 2018

The Medical law stipulates regulations about the physician's duty to inform to contribute to patient's self-determination. This law was most recently revised on December 20, 2016, and came into effect on June 21, 2017. There has been much controversy about this, and it has been questioned whether or not it will be effective for physicians to comply with the duty to inform. Therefore, this study investigated perceptions of physicians of whether they observed the duty to inform and their legal judgment about that duty, and analyzed how the revision of the medical law may have affected the legal cognition of physician's duty to inform. This study was conducted through an online questionnaire survey involving 109 physicians over 2 weeks from March 29 to April 12, 2018, and 108 of the collected data were used for analysis. The questionnaire was developed by revising and supplementing the previous research (Lee, 2004). It consisted of 41 items, including 26 items related to the experience of and legal judgment about the duty to inform, 6 items related to awareness of revised medical law, and 9 items on general characteristics. The data were analyzed using SAS 9.4 program and descriptive statistics, Chi-square test, Fisher's exact test and Binary logistic regression were performed. The results are as follows. • Out of eight situations, the median number of situations that did not fulfill the duty to inform was 5 (IQR, 4-6). In addition, 12 respondents (11%) answered that they did not fulfill the duty to inform in all eight cases, while only one (1%) responded that he/she performed explanation obligations in all cases. • The median number of the legal judgment score on the duty to inform was 8 out of 13 (IQR, 7-9), and the scores ranged from a minimum of 4 (4 respondents) to a maximum of 11 (3 respondents). • More than half of the respondents (n=26, 52%) were unaware of the revision of the medical law, 27 (25%) were aware of the fact that the medical law had been revised, 20(18%) had a rough knowledge of the contents of the law, and only 5(5%) said they knew the contents of the law in detail. The level of awareness of the revised medical law was statistically significant difference according to respondents' sex (p<.49), age (p<.0001), career (p<.0001), working type (p<.024), and department (p<.049). • There was no statistically significant relationship between the level of awareness of the revised medical law and the level of legal judgment on the duty to inform. These results suggest that efforts to improve the implementation and cognition of physician's duty to inform are needed, and it is difficult to expect a direct positive effect from the legal regulations per se. Considering the distinct characteristics of medical institutions and hierarchical organizational culture of physicians, it is necessary to develop a credible guideline on the duty to inform within the medical system, and to strengthen the education of physicians about their duty to inform and its purpose.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.4
• /
• pp.257-261
• /
• 1998

The repeated subcultures of in vitro plant materials in wasabi became highly vitrified and the capacity for multiple shoot formation from the vitrified plant materials was very low. In order to improve the quality of in vitro propagated planting materials, the experiments were carried out using culture vessels capped with membrane filter(MF). When vitrified shoots were cultured on MS medium with 0.2mg/L BA in the vessels with MF or without MF for 60 days, the shoots in the vessels with MF did not vitrified. In contrast, the shoots grown in the vessels without MF vitrified at 65%. The stomates of vitrified leaves were circular and inflated, whereas those of normal leaves acclimatizated in the vessels with MF were ovate in shape. The hardened shoots were also cultured on MS media without sucrose containing 0.01mg/L IBA in vessels with(photoautotrophic culture) or without(control) MF. Sucrose was necessary for survival of the in vitro plantlets in the vessels without MF. After 20 days of culture, the shoots in the vessels without MF on the sucrose-free media turned yellow and died. But the shoots in the vessels with MF in the sucrose-free media produced a lot of roots. When shoots were cultured on MS medium with 2% sucrose containing 0.01mg/L IBA in the vessels with(photomixotrophic culture) or without(heterotrophic culture) MF, best growth occured in photomixotrophic culture.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.507-513
• /
• 2001

An effective extraction methods of a garlic were investigated in order to improve the functional properties of the extracts. The solid yield, electron donating ability (EDA), nitrite-scavenging effects (NSE), peroxide value (POV) and total thiosulfinates contents of garlic extracts were determined. In order to improve the functional properties of extracts prepared with several organic solvents and acids, concentration and pH adjustment of the selected solvent and addition of acids and salts to solvents were also examined. Among the solvents tested, the methanol and ethanol extracts were found to be the most effective on the base of functionality and solid yields. The highest EDA, NSE and thiosulfinate value were obtained with 50% ethanol. The pH control of solvent and addition of citric acid, NaCl and phosphates to 50% ethanol did not affect on the functionality of the extracts. Therefore the optimal solvent for the best functional properties of garlic extract was 50% ethanol.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1002-1008
• /
• 2000

The purpose of this study was to provide the fundamental information for establishing the database needed to estimate total intakes of trans fatty acids in Korea. The amounts of trans fatty acids contained in 164 samples including 25 samples of margarines, 21 samples of shortenings, 19 samples of vegetable salad and cooking oils, 53 samples of confectionery products, 18 samples of bakery products, 19 samples of dairy products, and 9 samples of animal fats and meats were analyzed by capillary gas liquid chromatography. The average amounts of trans fatty acids in those foods were calculated and expressed as gram per one serving. Then, the average daily intakes of trans fatty acids per capita were estimated using the analyzed amounts of trans fatty acids and the amount of yearly production for those foods. The amounts of trans fatty acids per 100 g of lipids were $2.11{\sim}33.83%$ (14.66% on average) in margarines, $1.47{\sim}44.48%$ (14.21% on average) in shortenings, $0.18{\sim}3.82$ (1.54% on average) in vegetable salad and cooking oils, $0{\sim}45.81%$ (10.92% on average) in confectionery products, $0{\sim}18.32%$ (7.87% on average) in bakery products, $0.90{\sim}4.54%$ (2.27% on average) in dairy products, and $0.61{\sim}6.07%$ (2.24% on average) in animal fats and meats. Major isomers of trans fatty acid in the sample foods were $C_{18:1}$ and $C_{18:2}$. As a result, the korean average daily intake of trans fatty acids in korea was estimated to be 2.3 g per capita. The amounts of trans fatty acids consumed from each selected food were as follows: 0.35 g from margarines, 0.57 g from shortenings, 0.11 g from vegetable salad and cooking oils, 0.65 g from confectionery products, 0.07 g from bakery products, 0.14 g from dairy products and 0.21 g from animal fats and meats.