• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.761-767
• /
• 2019

In the present study, analyses of initial behavior of an air-launched projectile for varying initial conditions are performed by coupling computational fluid dynamics and 6 degrees of freedom calculations. Accuracy of the present numerical methods is validated by comparing the present result with the measured data. Launching safety analyses are carried out for various ejecting conditions by considering weight of the projectile and magnitude of front and rear ejector forces as the major parameters of initial behavior of the projectile. A response surface of the projectile launching safety is obtained in the range of the major parameters. In all the conditions of zero rear ejector force, unsafe launching behavior is observed. As the weight of the projectile decreases, the initial launching behavior becomes more unsafe.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.35-43
• /
• 2012

In this study, underwater behaviors of negative buoyant body and positive buoyant body, which are ejected from a platform, are compared through eject test and simulation. CFD(Computational Fluid Dynamics) method is used to calculate the hydrodynamic derivatives of negative buoyant body with varied hull. Hydrodynamic derivatives that cannot be calculated with CFD are used with the same values of base shape. The pitch angles of test data are much bigger than those of simulated data, and the reason is supposed to be the trailing air effect. A more accurate simulation is possible via modified force modeling which reflects this phenomenon. The underwater behaviors of positive buoyant body and negative buoyant body are somewhat different with each other at the same eject condition, but it may not be a problem in the view of operation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.517-526
• /
• 2019

In the present study, unsteady flows around a projectile ejected from an aircraft platform have been numerically investigated by using a three dimensional compressible RANS flow solver based on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. Initial behavior of the projectile for varying conditions, such as roll and pitch-yaw command on the control surface of the projectile, flight Mach number, and platform pitch angle, was investigated. The ejection stability of the projectile was degraded as Mach number increases. In the transonic condition, the initial behavior of the projectile was found to be unstable as increase of platform pitch angle. By applying the command to control surfaces of the projectile, initial stability was highly enhanced. It was concluded that the proposed simulation data are useful for estimating the ejection behavior of a projectile in design phase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.1-7
• /
• 2006

In the present study, A 3-D chimera technique for overlapped bodies in relative motion is studied using unstructured meshes. If all node points of a mesh element at solid boundary are in another body, this element is excluded from computational domain. For computation of unsteady flow, non-active cells have proper variables using interpolation and extrapolation. These variables are used in next time step. The motion of a launching trajectory ejected from a wing and the motion of deploying fins of a trajectory which have not been simulated are computed to conform practicality of this technique.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.313-319
• /
• 2023

In this paper, a time series machine learning model, Long Short Term Memory (LSTM), is applied into the bubble flow noise data and the underwater projectile launch noise data to predict missing values of time-series underwater noise data. The former is mixed with bubble noise, flow noise, and fluid-induced interaction noise measured in a pipe and can be classified into three types. The latter is the noise generated when an underwater projectile is ejected from a launch tube and has a characteristic of instantaenous noise. For such types of noise, a data-driven model can be more useful than an analytical model. We constructed an LSTM model with given data and evaluated the model's performance based on the number of hidden units, the number of input sequences, and the decimation factor of signal. It is shown that the optimal LSTM model works well for new data of the same type.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.227-235
• /
• 2016

Heavy-weight high speed underwater vehicle(HSUV) is launched from the submerged mother ship. For the safety point of view, it is important to confirm whether the HSUV would touch the launching mother ship. In this paper, the hydrodynamic force and moment were modeled by the polynomials of motion variables and the simple lift and drag acting on a plate and cylinder which consist of the HSUV's several parts. The mother ship was assumed as the Rankine half body to consider the flow field near the moving ship. Such hydrodynamic force and moment were included in the 6 DOF equations of motion of the HSUV and the dynamic simulations for the various conditions of the HSUV until the propeller activation were performed. Developed simulation program is expected to reduce the number of expensive sea trial test to develop safety logic of the HSUV at the initial firing stage.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.17-25
• /
• 2006

In the present study, a 2-D chimera technique for overlapped bodies in relative motion is developed using unstructured triangular meshes. The solid boundary nodes located next to the intersecting point between bodies are merged to the intersecting point to assure accurate representation of the intersecting region. In order to assign proper value of flow variables at the nodes located out of the computational field, interpolation is conducted for non-active nodes. For validation, the motions of a NACA64A006 airfoil and a NACA0012 airfoil with a plane flap are computed and the results are compared with other simulations. The motion of a launching missile ejected from a NACA0012 airfoil is also simulated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.405-412
• /
• 2017

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the platform. Qualitative analysis was conducted for the time history of vapor volume fraction distributions. Uncorking pressure around the projectile and platform was analyzed to predict impact force acting on the surfaces. The results of 6DOF analysis presented similar tendency with the surficial pressure distributions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.228-236
• /
• 2021

In order to understand the underwater noise source factor of the linear pump type forced ejection system, a reduced-model compressed water experiment device was developed. The reduced-model compressed water experiment device consists of a reverberation tank, a linear pump type forced ejection device, and an underwater vehicle. The underwater noise source was selected from the hydraulic ram moving speed, the hydraulic ram/piston pipe spacing, the ejection pipe inlet/water ram area ratio, and the number of water ram inlets. The underwater vehicle was ejected into the reverberation tank by the device. The source level was derived from the measured sound pressure. The source level tends to increase as the hydraulic ram/piston tube spacing and the hydraulic ram moving speed increase. The source level tended to increase as the area ratio was increased, but the level was weak. The number of water ram inlet did not affect the source level.

• Journal of Veterinary Clinics
• /
• v.30 no.6
• /
• pp.442-448
• /
• 2013

The aim of the present study was to develop glycerol-free TRIS extender using glucose for dog sperm cryopreservation. We determined the appropriate concentration of glucose in glycerol-free TRIS and the exposure time in glycerol-free TRIS containing 0.3 M glucose at $4^{\circ}C$. Ejaculates of six dog sperm were cooled in glycerol-free TRIS through $4^{\circ}C$ for 100 min, cooled at $4^{\circ}C$ in TRIS with different glucose concentrations 0 M, 0.04 M, 0.1 M, 0.2 M and 0.3 M, respectively for 30 min followed by cryopreservation. After thawing at $37^{\circ}C$ for 25 sec, membrane and acrosome integrities of dog sperm were evaluated. In addition, the effect of exposure time (10, 30, 50 and 70 min) of sperm to glycerol-free TRIS containing 0.3 M glucose at $4^{\circ}C$ on progressive motility, viability, and DNA integrity following sperm cryopreservation was studied. Membrane integrity and acrosome integrity were assessed by 6-carboxyfluoresceindiacetate (6-CFDA)/propidium iodide (PI) fluorescent staining and Pisum sativum agglutinin conjugated to fluorescein isothiocyanate, respectively. DNA integrity was assessed by terminal deoxynucleotidyl transferase dUTP nick end labeling, using flow cytometry. Sperm frozen in glycerol-free TRIS supplemented with 0.2 M or 0.3 M glucose have an intact plasma membrane (CFDA+/PI-) after cryopreservation than sperm frozen in the extenders with lower glucose concentrations (p<0.05). Acrosome integrity was significantly higher in the 0.3 M group than less than 0.1 M groups (p<0.05). The sperm DNA fragmentation index did not differ according to exposure time, although progressive motility was significantly higher in the 50 min exposure group than the other groups (p<0.05). These results indicate that cryopreservation of dog sperm is feasible and yields more motile sperm following freezing and thawing in glycerol-free TRIS containing 0.3 M glucose with the exposure time for 50 min at $4^{\circ}C$.