• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4411-4417
• /
• 2015

The proper design of the gate location for injection molding of plastic goods is obtained from three-dimensional injection molding analysis for various design alternatives. This paper is study on effect of gate location in injection molding. It have a decisive impact on productivity and quality of plastic goods. This objectives of this paper is to analysis effect of hot runner gate location for resin filling, weld line, injection pressure to manufacture of automobile air cleaner upper case with injection molding machine. Thus, to analysis these problems in this paper, location of gate are gave variety in 4 CASEs. In this paper, the CAE simulation considering each variations in location of gate is performed to predict the cause of faulty which appears in the injection molding process.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.295-302
• /
• 2003

The amount of shrinkage of injection molded parts is different from operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It also varies depending on the presence of crystalline structure in resins. In this study, part shrinkage was investigated for various operational conditions and resins. Poly(butylene terephthalate) (PBT) for crystalline polymer, and polycarbonate (PC) and poly(methyl methacrylate) (PMMA) for amorphous polymers were used. Crystall me polymer showed higher part shrinkage by about three times than that of amorphous polymers. Part shrinkage increased as melt and molt temperatures increased, and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for larger gate sizes. Part shrinkage at the position close to the gate was larger than that or the position far from gate. This phenomenon might be occur by difference of residual stress.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.121-128
• /
• 2016

In injection molding process, the appearance quality issue occurs in most injection molded article. One of thermal designs for the mold was performed by increasing the cavity wall temperature with being as uniform as possible in any position. On the basis of the practical evaluation, the cavity wall temperature and finishing machined cavity surface under the optimum processing conditions are the most significant factors to avoid the appearance issue on the plastic part for a good cosmetic quality. Also, the wrong choice of gate type and location can have a considerable effect on the quality of a molded part and it's so important to keep the correct runner balance from each cavity. We've proposed the education training model of the practical tool technology course for the field oriented education to improve practical tool technology ability and optimized tooling design for injection molding quality which can be performed at the workplace substantially.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.1-21
• /
• 2016

The purpose of this study is to analyze job of die and mold makers for apprenticeship education of specialized high school using DACUM method. The contents of this study were to identify the duties, specific tasks performed and the level of importance, difficulty, frequency and entry level on each task. This study also make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school. The DACUM committee, which consisted of one facilitator, nine die and mold experts, one recorder and one coordinator, was established to conduct DACUM. The conclusions are as follows; First, this study defines a die and mold makers as 'a person who make it possible to manufacture/assemble/inspect die and mold parts using various machine tool'. Second, duties in job of die and mold makers for apprenticeship education were total 12 and total tasks in job of die and mold makers for apprenticeship education were 86. Third, this study determine the level of importance, difficulty, frequency and entry level about each task. Finally, this study make out a DACUM chart of die and mold makers for apprenticeship education of specialized high school based on the results of DACUM job analysis. And knowledge, skills, tools, and positive behaviors, future trends/concerns about die and mold makers for apprenticeship education of specialized high school were presented.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.974-977
• /
• 2010

본 논문은 자동차의 부품 중 에어 밴트를 효율적으로 개발하기 위하여 제품의 형상, 사출 해석, 변형과 그 제품이 완성차에 설치 시 열유동에 관한 해석 및 개발에 관한 논문이다. 이를 위하여 3차원 설계를 한 후, 사출성형 공정에 대한 충전시간, 웰드 라인, 에어트랩 등 사출 성형 공정에 대한 분석 하였다. 다음으로 완성차에 조립된 상태에서 열유동 해석을 통하여 제품 윤곽선의 적합성을 확립하였으며 이를 바탕으로 하여 금형을 제작할 수 있는 설계조건을 확립 하였다.

• The Optical Journal
• /
• s.113
• /
• pp.39-41
• /
• 2008

한국와이다(대표.장해산)는 1994년 11월 창립한 이래 13년간 쌓아온 금형가공기술을 바탕으로 현재 광학설계 및 금형 부품 가공에서 금형 완제품 제작, 사출까지 total solution을 구축하고 고부가가치를 창출하는 초정밀 금형업체로 거듭나고 있다. 세계적 기업인 삼성전자의 우수협력사로 선정된 것은 물론, 국내 많은 렌즈업계에 금형을 제공하며 품질과 우수성에서 인정받고 있는 한국와이다는 현재에 만족하지 않고 최고의 기술개발을 통해 세계 어디에도 뒤지지 않는 '명품 금형'을 실현하겠다고 도전장을 내밀었다.

• Journal of Practical Engineering Education
• /
• v.10 no.2
• /
• pp.89-94
• /
• 2018

In injection molding, the tool temperature has a great influence on the quality of the molded article. The appropriate temperature is determined by the molding material and the quality required for the molded part, and the important point is that the temperature should be stable. First, the tool temperature should be set in accordance with the quality required by the molded article within the range of the tool temperature conditions suitable for the material. That is, the tool temperature changes depending on the importance of the surface gloss of the molded article, shortening of the molding cycle, prevention of deformation, degree of shrinkage, ease of resin flow and the like. In order to improve practical tool technology, we propose a training model of the difficult process of tool temperature control which can be utilized in industry that design and manufacture injection mold.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.133-135
• /
• 2003

본 연구는 사출성형공정상에서 발생하고 있는 사출성형물의 Weld line에 의한 외관 불량을 해석하고 개선된 품질을 얻기 위한 시도이다. 사출성형 관련 설계는 사출금형설계 전문가의 축적된 지식과 경험을 활용하여 수행되어 왔으며, 설계에 필요한 설계자의 경험이 전무한 경우 많은 시행 오차를 유발하고 있는 실정이다. 본 연구에서는 Window Panel의 사출성형을 수행함에 있어 생산 중 발생되고 있는 Weld line에 의한 제품 외관의 문제를 수치해석을 통하여 시뮬레이션함으로써 제품 품질을 향상 하고자 해석을 시도하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.147-150
• /
• 2002

사출성형 공정의 컴퓨터 시뮬레이션(CAE)은 짧은 시간에 저 비용으로 여러 설계 및 재료와 공정조건의 조합을 시험할 수 있는 수단이다. 실제 금형을 가공하고 시제품을 생산하기 전에 미리 해석을 수행하여 봄으로써 설계의 오류 및 부적절한 공정조건의 설정을 방지할 수 있다. 컴퓨터 시뮬레이션은 공정조건에 의한 사출성형을 가능하게 해 준다. 즉, 수지의 거동, 냉각과정, 압력거동 등을 컴퓨터 화면을 통해 볼 수 있으며 이를 기초한 성형품의 예상문제점을 파악할 수 있다. 본 논문에서는 CAE기술을 응용한 Back Light Panel의 설계에 대해 논의하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.901-902
• /
• 2009