• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.573-581
• /
• 2022

This paper deals with the development of CanSat system, which ejects two maple seed-type autorotating science payloads and collects weather information. The CanSat consists of two autorotating science payloads and a container. The container is equipped with devices for launching science payloads and communication with the ground station, and launches science payloads one by one at different designated altitudes. The science payload consists of a space for loading and a large wing, and rotates to generate lift for slowing down the fall speed. Specifically, after being ejected, it descends at a speed of 20 m/s or less, measures the rotation rate, atmospheric pressure, and temperature, and transmits the measured value to the container at a rate of once per second. The communication system is a master-slave structure, and the science payload transmits all data to the master container, which aggregates both the received data and its own data, and transmits it to the ground station. All telemetry can be checked in real time using the ground station software developed in-house. A simulation was performed in the simulation environment, and the performance of the CanSat system that satisfies the mission requirements was confirmed.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.671-677
• /
• 1996

본 논문은 Sr 페라이트 플라스틱자석의 자기특성에 관하여 연구한 것이다. Sr 페라이트의 조성은 SrO5,9Fe2O3에 CaO, SiO2, Na2SiO3 및 AI2O3를 미량 첨가하고, PVA(polyvinylalchohol) 7%수용액을 가하여 질소분위기에서 120$0^{\circ}C$, 2시간 소성하였다. PVA를 이용한 탄소코팅법으로 분말제조시 분쇄효과를 얻었으며, 페라이트의 함량을 증가시켜서 자기특성을 향상시켰다. Sr 페라이트분말과 폴리아미드 6을 75-90wt%로 혼련한 수 0-10 kOe의 자장을 인가하여 이방성 Sr 페라이트 플라스틱 자석을 제조하였다. 자석제조시 사출온도 27$0^{\circ}C$, 사출압력 120kg/$\textrm{cm}^2$, 자장으 세기 8 kOe 및 자장인가시간 6초에서 최적의 사출성형조건을 얻었다. 실험결과 자장중 사출성형법을 이용하여 제조한 이방성 플라스틱자석에서 (BH)max=-2.0MGOe의 특성을 얻었다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.291-296
• /
• 2000

The manufacturing method of permalloy soft magnet with the Ni contents of 46.6 and 47.2 wt% was investigated by powder injection molding technology. The magnetic properties of permalloy were greatly affected on the residual carbon and oxygen content of the sintered magnet. Solvent extraction and thermal debinding process to minimize the residual carbon content in sintered magnet were developed by controlling the debinding atmosphere. The residual carbon content depends on the debinding condition of the binder system for powder injection molding and the residual oxygen content on the sintering atmosphere. The sintered magnet produced by powder injection molding process had a 50 ppm. residual carbon, 150 ppm. residual oxygen. The coercivity and maximum relative permeability of permalloy soft magnet were 0.46 Oe and 14,600 respectively.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.251-259
• /
• 1999

In this paper, a case study is introduced on the development of an information system for production management in the injection molding factory. For the systematic management of the information derived from the whole production process, an integrated and computerized information system is needed. In this paper, an integrated information system of production management for the W company is developed to manage the whole information related with make-to-order, production, delivery, and inventory, and so forth.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.99-104
• /
• 2011

In this paper the approach of neural network was proposed which detects a variety of defects in the molded parts. In an attempt to improve the response of the system, It is designed to minimize the use of memory via LookUp table in software. The goal of these methods was to extract the features of samples in learning of neural networks, overcoming the algorithms of defects detection and classification. Through the learning of 500 sample patterns of molded parts, defects of 3% molded parts was detected and classified as the incorrect diameter parts. We expect that proposed approach is an effective alternative to save test time and cost for defect detection of a fine pattern within the molded parts.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.358-365
• /
• 2009

High-frequency induction is an efficient way to rapidly heat mold surface by electromagnetic induction. In the present work, high-frequency induction heating is applied to injection molding of a mobile phone cover in order to eliminate weldlines by efficiently raising the mold temperature. Through the induction heating experiments, the maximum temperature of $143^{\circ}C$ is obtained on the mold surface in 3s of heating, which is higher than the glass transition temperature of the resin material. An injection molding experiment is then performed with the aid of induction heating, from which we can successfully remove all the weldlines of the mobile phone cover. The effect of induction heating conditions such as the heating power and the heating time on the surface appearance is experimentally investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.660-664
• /
• 1997

본 논문은 사출금형 설계를 위한 전문가 시스템의 개발에 관한 연구이다. 설계자가 오토케드 (AutoCAD)환경에서 금형부품 및 몰드베이스를 3차원 형상으로 나타낼 수 있으며 필요한 설계 데이터를 추가할수 있는 프로그램 개발에 있다. 주 프로그램은 C++를 사용하여 구축하였으며,금형부품 치수 및 몰 드베이스를 데이터베이스화 하였다. 주 프로그램과 오토캐드와 인터페이스를 하여 오토캐드 환경에서 자 유롭게 사용할 수 있도록 하였다. Pull-down menu와 Dialog box를 이용하여 금형 설계자가 금형의 각 부 품을 자유롭게 선정할 수 있으며, 각 단계별 선정된 금형부품은 즉시 나타나 설계자가 바로 확인 할 수 있도록 하였다. 이젝터 핀의 위치 및 크기를 자동적으로 나타낼수 있으며, 선정된 금형 부품 및 몰드베이 스는 2차원이나 3차원으로 나타낼 수 있다. 각각의 3차원 부품을 독립적으로 나타낼 수 있어 NC프로그램과 인터페이스가 가능토록 하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.25-29
• /
• 2008

In this paper, we design internal space in plunger-type low pressure vacuum injection molding machine from numerical study. And we study characteristic of viscoelastic flow for searching injection molding condition. Then the flow analysis was performed using the CAE S/W. The result shows optimal value of nozzle and hole in injection chamber. And we investigated qualitatively relationship between injection pressure and injection mass flow with variable shear rate

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.33-37
• /
• 2001

The synthesis of gates of injection-molded parts has been done empirically, since it requires profound knowledge about the gate design,. which is not available to designers through current CAD systems. GATEWAY is a knowledge module which contains knowledge to Permit non-experts as well as mold design experts to generate acceptable gate design of injection-molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, GATEWAY, for gate synthesis and appropriate CAE programs for mold design analysis to an existing geometric modeler to provide designers, at the initial stage, with comprehensive process knowledge for gate synthesis. Performance analysis and feature-based geometric modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.55-61
• /
• 2011

Battery cases have been made of polypropylene and its warpage is relatively large due to the crystalline characteristic of polypropylene. In this study, the battery case when the injection mold used to improve the Gate by simplifying the process of production cost savings and focus on improving the quality of molding CAE analysis was carried out. The result could be produced in plastic and products of the imbalance in the flow and deformation and to predict reliability of the product will contribute to reduced scrap.