• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.687-692
• /
• 2015

A mold design for in-mold coating was developed to achieve simultaneous coating and injection molding of an automotive armrest. The developed mold includes one core and two cavities which are composed of a substrate cavity and a coating cavity. The core was attached to a movable plate and two cavities were mounted on a plate sliding in a stationary plate. In a two-step process, the part was first injection molded and subsequently, with the aid of a sliding table, was transferred to a second cavity. The materials used were PC/ABS for substrate and two-component polyurethane for coating. The experiments were conducted by changing the flow rate to investigate mixing characteristics. As the flow rate increased, the mixing improved. Additionally, the bubbles appeared over the substrate surface decreased with an increase of the weight of injected coating material.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.130-133
• /
• 2002

금형온도가 사출 성형품에 미치는 영향 중에 결정성수지인 PP(Polypropylene)와 비결정성수지인 PS(Polysyene)는 금형온도가 높아짐에 따라 각기 다른 결과를 나타내었다. PS성형품은 금형온도가 높을수록 수축율이 줄어들고 두께 편차가 적어지는 경향을 관찰할 수 있었고, PP성형품의 경우에는 결정의 생성으로 인한 상반된 경향이 관찰되었다. 또한, 금형온도에 따른 캐비티의 매끄러운 면과 거친 면의 결과로 볼 때 금형온도가 높을수록 캐비티의 충전성 및 전사성이 향상되었다. MmSH(Momentary Mold Surface Heating)조건인 경우는 수축율과 전사성 모두다 양호한 결과를 보여주었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4713-4718
• /
• 2013

Nowadays, three-dimensional computer added design(3D CAD) tool are widely and actively used for design of mechanical machine. Because using the tool is more effective to understand design concept and to collaborate with other operation than using two-dimensional design tool. In this study, the 3D CAD tool which is called I-DEAS was applied for three-dimensional modeling of main parts and assembling of modeled parts for identification the entire shape of a injection molding machine. In addition, a study was also performed regarding reduction for the weight of main plates for saving production cost and energy in the machine. A finite element method(FEM) program in I-DEAS tool was used for the improvement study. First, the current main plates were structural analysed and then the plate deformations, weak regions and stress distributions were graped. By the FEM results, the 2nd improved designing of the plates was conducted such as reinforcement or slimming of the plate wall thickness. The 2nd structural FEM was performed for verification of the redesigned plates and then the FEM results were compared with the 1st FEM's result. The weight of the main plates were averagely reduced approximately 3 - 7%. By these results, it was seemed that the improved plates have a useful availability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4411-4417
• /
• 2015

The proper design of the gate location for injection molding of plastic goods is obtained from three-dimensional injection molding analysis for various design alternatives. This paper is study on effect of gate location in injection molding. It have a decisive impact on productivity and quality of plastic goods. This objectives of this paper is to analysis effect of hot runner gate location for resin filling, weld line, injection pressure to manufacture of automobile air cleaner upper case with injection molding machine. Thus, to analysis these problems in this paper, location of gate are gave variety in 4 CASEs. In this paper, the CAE simulation considering each variations in location of gate is performed to predict the cause of faulty which appears in the injection molding process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.389-390
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1349-1350
• /
• 2011

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.144-146
• /
• 2001

The synthesis of injection-molded parts has been done empirically, since it requires profound knowledge about injection molding which is not available to designers through current CAD systems. Appropriate U3 programs for mold design analysis to an existing geometric modeler is used to provide designers, at the initial stage, with comprehensive process knowledge for synthesis, performance analysis and feature-based geometric modeling.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.559-570
• /
• 2011

생산재와 소비재의 반제품을 이루고 있는 플라스틱 부품들이 다른 소재의 제품들을 대체하면서 급속히 증가하고 있다. 이는 사출성형의 공정으로 생산되는 제품들이며 플라스틱의 기능과 특성이 우수하다는 장점과 더불어 제품구현이 빠르고 대량생산이 가능하기 때문이기도 하다. 본 연구에서는 제조설비시스템(MES)를 임베디드 장치를 장착하여 플라스틱 사출금형으로 반제품을 생산하는 과정에서 공정상에 발생하는 이상 증후에 대한 진단과 장시간 생산이 진행되는 과정에서 사출성형조건의 지속성 유지의 문제점을 실시간으로 모니터링하여 예방과 대책 방법을 제시한다. 품질이상을 감지하기 위해 온도, 압력, 시간을 측정하기 위한 센서와 인터페이스 설계를 통해 작업자의 판단상황을 객관적으로 설치전과 후의 경제성 분석을 하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.87-90
• /
• 2001

본 논문은 사출성형제품의 게이트 설계를 합리적으로 수행하기 위해 사출금형설계전문가의 축적된 지식과 경험을 발췌ㆍ정리하여 지식베이스를 작성하였으며, 설계에 필요한 제품의 형상정보를 제공하기 위해 총칭형상과 특징형상 개념을 이용하여 특징형상을 정의하였다. 또한 지식베이스를 통해 산출된 설계결과를 기하학적 모델러와의 인터페이스를 통해 3차원 형상으로 보여지도록 하였으며, 최종 생성된 3차원 기하학적 형상정보는 CAE 모듈이나 CAPP 모듈에서의 후속작업을 위해 제공될 수 있도록 구축되었다.