• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.42-48
• /
• 2020

This study is on the injection molding analysis for the LED outdoor lighting top cover of one heat sink body type structure. Thermoplastic and thermosetting resins were applied to compare the thermal properties during the injection molding process. The thermoplastic resin is used in this study due to special characteristics that it is light, good strength and dose long not transmute quality even if pass long time. The thermosetting resin is applied to this study due to good in strength, lightweight and excellent etc, thermal conductivity. This study presented a preliminary analysis of fill time, weld line, air trap etc. for the injection molding process of LED lamp cover and body through simulation using Moldflow. As a result of the study, it was selected HTM-102 material because the thermosetting resin has excellent strength and heat conductivity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.68-75
• /
• 2002

Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. In some cases, that approximation causes significant errors due to loss of geometrical information as well as simplification of the flow characteristics along the thickness direction. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the classical shell-based approach. The proposed approach are then applied to predict product defects and to improve flow characteristics for a precision electronics part. In addition, design of experiment has been utilized in order to find the optimal process conditions for better product quality.

• Design & Manufacturing
• /
• v.2 no.3
• /
• pp.6-9
• /
• 2008

This paper describes the process of structure analysis and injection molding analysis to manufacture the forming injection dies for huge glass insert. Factors such as filling time, filling pressure, material temperature, shrinkage, warpage were investigated by using the analysis software, Moldflow. Runner system and cavity structure were designed and manufactured through the results of deformation analysis data for glass insert. Filling time and filling pressure were analyzed in 3.756sec and 43.37MPa.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2000

This paper is concerningon the development of cross-flow fan (CFF) for vehicles. CFF is widely usedhome-appliance products. This work mainly Intends developing CFF only for an automobile. In order to do that, new design involving blade shapes is proposed with enough performance for the operation. Spacially three steeps are proceeded for blade design. injection conditions for manufacturing, and capacity test for fluid mechanics. The present methodologies are to find optimal design for the blades and conditions for the injection process. This project has continued since last two years and finally succeeded.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.141-146
• /
• 2005

In the present study, the characteristic of warpage and flow balance for family mould, which is able to mold parts with different shapes in a mold, is considered. To obtain an optimal gate and runner system, plastic injection molding analysis with commercial code is performed. Design and manufacturing of family mould is then carried out on the basis of this computer aided engineering result. Flow balance and warpage comparisons between experiment and numerical analysis give good agreement with each other. However, it was shown that results of warpage measured by CMM was about $20\~55\%$ lower than those of numerical analysis.

• Design & Manufacturing
• /
• v.12 no.3
• /
• pp.55-59
• /
• 2018

In a multi-cavity mold having a runner layout of a fish bone structure, problems of unbalanced filling between cavities occur constantly. Unbalanced charging lowers the dimensional accuracy of a molded article and causes deformation after molding. To solve this problem, the gate size connected to each cavity is adjusted using the BGV (Balanced Gate Value) equation. In this paper, in order to solve the filling imbalance problem of the runner layout mold of fish bone structure through injection molding analysis study, we compared the charging imbalance phenomenon before and after improvement after adjusting the gate size by applying BGV equation. From the results of the molding analysis, the shrinkage ratio before and after the improvement of the molded article was improved by only about 0.08%. Based on these results, it was confirmed that the charging imbalance problem was not significantly improved even when the BGV equation was applied.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.183-186
• /
• 2003

Reaction injection molding (RIM) is a widely used process for producing various kinds of complex parts including automobiles, furniture, appliances, and housings. In RIM, products are made from two or more chemical components through mixing, chemical reaction, and molding [1]. Liquid reactants from two supply tanks flow at high pressure into a mix head, where they impinge at high velocity. (omitted)

• 연구논문집
• /
• s.25
• /
• pp.5-12
• /
• 1995

Mold platen are one of the most important structural components of the injection molding machine. Mold platen had been designed, and manufactured based on the experience and the method of trial and error. Recently, as the computer progress, the numerical simulation method using commercial finite element analysis code has been used to analyze the characteristics of components. It's a urgent problem to reduce the weight of mold platen while preserving the safety and reliability for the structual failure. Finite element analyses to establish basic design technologies and reducing the weight of mold platen were carried out. As result, we are obtained the about 10% reducing the weight for mold platen.

• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.180-187
• /
• 2004

A computer code was developed to simulate the filling stage of the injection/compression molding process by a finite element method. The constitutive equation used here was the compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Simulations of a disk part under different process conditions including the variation of compression stroke and compression speed were carried out to understand their effects on birefringence variation. The simulated results were also compared with those by conventional injection molding.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.451-452
• /
• 2011