• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.502-509
• /
• 2011

It is necessary to resolve integer ambiguity in GPS carrier based precise positioning. If there is no signal blockage or cycle slip, the integer ambiguity does not changed. however, signal blockage and cycle slip occur frequently under real operational environment. under this situation, integer ambiguity maintenance is indispensable for continuity of navigation information. In this paper, a cycle slip free technique is proposed for simplifying integer ambiguity maintenance procedure. this technique tested with simulated carrier phase signal with cycle slip aided intentionally. As a result, the proposed technique can give navigation information continuously even if cycle slip is occured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1765-1773
• /
• 1997

The communication systems which include PLL may have cycle clip problem because of channel noise. The cycle slip problem occurs the synchronization loss of communication system and it may be fatal to the synchronous stream cipher system. While continuous resynchronization is used to lessen the risk of synchronization it has some problems. In this paper, we propose the method which solve the problems by using continuous resynchronization with the clock recovery technique. If the counted value of real clock pulse in reference duration is not same as that of normal state, we decide the cycle slip has occurred. The damaged clock by cycle slip is compensated by adding or subtracting the clock pulse according to the type of cycle slip. It reduced the time for resynchronization by twenty times. It means that 17.8% of data for transmit is compressed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.153-156
• /
• 2006

국제해사기구(IMO) 권고에 따라 도입된 우리나라의 해양용 DGPS 기준국 구축과 국무총리 훈령에 의거 추진 중인 내륙용 DGPS 기준국의 운영현황 등을 기술하고 DGPS 기준국과 GPS 상시관측소간의 서로 다른 제원에 따른 후처리데이터의 신뢰도 품질체크를 TEQC 프로그램을 통해 비교 ${\cdot}$ 분석했다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.337-345
• /
• 2007

National Geographic Information Institute has installed the first permanent Global Positioning System (GPS) station SUWN in 1995 and, as of today, the number of sites is 14. In this study, we visited all the 14 stations and determined if the site mount and antenna configuration conforms to the international site guidelines published by International GNSS Service and National Geodetic Survey. The environment around each station was also checked for the possibility of causing positioning errors. In addition, the GPS data quality was evaluated using the quality-checking program called TEQC. As a result of site visits, we found that low stations (TABK, CHJU, KWNJ, and WNJU) have unfavorable environment and TEQC results validated it. TEQC results also showed that the GPS receiver change during years 2005-2006 reduced the multipath errors and the number of cycle slips at every station.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.718-727
• /
• 2000

Nowadays, most passenger cars equipped with automatic transmissions use torque converter clutches to reduce fuel consumption, and recently the slip control scheme of torque converter clutches is widely studied for the expansion of the operating region of torque converter clutches and thus for the further improvement of the fuel economy of vehicles. In this study, the analysis of the torque converter clutch system including the line pressure control unit of the automatic transmission and the actuating hydraulic control unit of the torque converter clutch is performed, and a feedforward controller and a fuzzy logic controller for its slip control are proposed. Also, for the slip controller to use the grade resistance information during control, an observer-based grade resistance estimator is designed. The performance of the designed grade resistance estimator and the slip controller is verified by dynamic simulations, and the effect of the torque converter clutch slip control on the fuel economy is examined using a driving cycle simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.61-67
• /
• 2005

This paper presents the carrier phase DGPS method providing a stable navigation solution under the condition of frequent blockage of the GPS signals. The proposed algorithm reject the channels having large errors using a clock bias drift and then calculated the more accurate solution. By investigating the relation between visible satellites` elevation and their clock bias drift, a proper threshold is set. Simulation shows that the presented result is as good as that of commercial system with real data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.331.1-331
• /
• 2002

Four degrees of freedom mathematical model is presented to describe the fundamental mechanisms of the disc brake squeal noise. A contact parameter is introduced to describe the coupling between the in-plane and the out-of-plane motions. The friction coeficient including "relative velocity" and ′normal force" can be generally formulated as the form of multiplication with polynominal parameters(${\beta}$, ${\gamma}$). (omitted)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.319-320
• /
• 2011

이 연구에서는 국토해양부 해양교통시설과 위성항법중앙사무소가 운영하고 있는 DGNSS 기준국의 신호수신환경을 파악하기 위해 관측자료의 TEQC 품질평가와 현장조사를 병행하였다. TEQC는 GPS 수신기로 관측한 원시자료를 RINEX형식으로 변환 편집하고, 관측자료의 품질을 점검하는데 이용하는 GPS 전처리 소프트웨어이다. TEQC 품질점검 기능을 통해 GPS 관측자료의 데이터수신율, L1과 L2 신호의 의사거리 다중경로오차, 사이클슬립에 관한 지수를 산출하였고, 이를 현장조사결과와 상호 비교하였다. 장기 관측 자료의 TEQC 품질지수 결과를 통하여 시간변화에 따른 관측소의 주변환경 및 장비변화 시점을 간접적으로 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.397-407
• /
• 2017

In this study, a SCR system is employed to selectively reduce $NO_X$, which is a major cause of environmental pollution and issues in diesel engines. In particular, this paper focuses on the combination of feedforward injection strategies, depending on the NO/$NO_X$ ratio, and feedback injection control, using $NH_3$ coverage ratio, based on a SCR model. A 2.2 L passenger diesel engine, which is equipped with a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF), was used in the experiments. The developed control algorithm is implemented on a real-time computer with injection control algorithm. By analyzing the $NO_X$ emission measurement, the performance of the proposed injection control algorithm is verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.255-261
• /
• 2002

A four-degree of freedom model is suggested to understand the basic dynamical behaviors of the normal interaction between two masses of the friction induced normal vibration system. The two masses may be considered as the pad and the disk of the brake. The phase space analysis is performed to understand complicated in-plane dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this paper, on the basis of the in-plane motion not only the existence of the limit cycle but also the size of the limit cycle is examined o demonstrate the non-linear dynamics that leads the unstable state and then the normal vibration is investigated as the state of the in-plane motion For only one case of the system frequency(two masses with same natural frequencies), the propensity of the normal vibration is discussed in detail. The results show an important fact that it may be not effective when too much damping is present in the only one part of the masses.