• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.129-137
• /
• 2010

This paper presents a position tracking control of a flexible beam using the piezoelectric actuator. This is achieved by implementing both feedforward hysteretic compensator of the actuator and PID feedback controller. The Preisach model is adopted to develop the feedforward hysteretic compensator. In the design of the compensator, estimated displacement of the piezoceramic actuator is used based on the limiting triangle database that results from collecting data of the main reversal curve and the first order ascending curves. Experimental implementation is conducted for position tracking control and performance comparison is made between a PID feedback controller without considering the effect of hysteresis, and a PID feedback controller integrated with the feedforward hysteretic compensator.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.40-51
• /
• 2009

To analyze influences under open faults in switching devices of the PWM inverter and under the isolation between the inverter and motor terminal, a faulty model for the inverter-driven permanent magnet synchronous motor is presented. Even though the conventional dq motor model obtained through the transformation of phase voltage model is widely used to analyze and control AC motor, it can not be used under open faults in switching devices since the 3-phase balanced condition is no longer hold under the open fault and it is not easy to obtain motor input voltages in open phase from the pole voltage. To deal with this problem, a faulty model for an inverter-driven permanent magnet synchronous motor is derived by using the line voltage of motor according to switch open, which can be effectively used for performance evaluation of the diagnostic algorithm. The validity of the proposed faulty model is verified through comparative simulations and experiments using DSP TMS320F28335.

• Journal of the KSME
• /
• v.34 no.10
• /
• pp.770-779
• /
• 1994

생산공정에서 사용되는 거의 모든 제어대상 플랜트나 시스템들은 비선형적이고 불확실한 특성을 내포하고 있다. 종래의 제어기법들은 이러한 시스템들을 수학적으로 단순화시켜, 그 단순화된 모델을 바탕으로 제어하는 것을 기본으로 하고 잇는데, 이러한 방법은 시스템의 여러 가지 정 보의 손실을 초래하여 제어기 전체의 성능을 저하시키는 원인이 된다. 이러한 문제를 해결하기 위하여, 지능 제어 기법을 생산현장 플랜트에 적용함으로써, 종래의 제어기법들에 비해 향상된 제어 성능을 기대할 수 있다. 이 글에서는 이러한 기법들에 대한 이론의 소개 및 용접, 조립, 레이저 경화 등과 같은 생산공정과 로봇 제어분야 등에 적용한 사례연구를 살펴보고, 이를 통 하여 지능 제어 기법의 유용성을 살펴보기로 한다.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2010

Currently, vector control is used for speed control of trains because induction motor has high performance is installed in Electric railroad systems. Also, control of the induction motor is possible through various methods by developing inverters and control theory. Presently, rolling stocks which use the induction motor are possible to brake trains by using AC motor. Therefore model of motor block and induction motor is needed to adapt various methods. There is Variable Voltage Variable Frequency (VVVF) as the control method of the induction motor. The torque and speed is controlled in the VVVF. The propulsion system model in the electric railroad has many sub-systems. So, the analysis of performance of the speed control is very complex. In this paper, simulation models are suggested by using Matlab/Simulink in the speed control characteristic. On the basis of the simulation models, the response to disturbance input is analyzed about the load. Also, the current, speed and flux control model are proposed to analyze the speed control characteristic in the train propulsion system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.31-40
• /
• 2008

This paper presented the development and real-time control of a magnetostrictive micro actuator. Magnetostrictive material has many advantages such as high response time, precision displacement and powerful output force. But Magnetostrictive material has characteristic of hysteresis. Conventional Preisach model which based on experimental data is not suitable to the real-time control because of controlling a magnetostrictive system by Preisach model costs a lot of calculating time. And, we prove the validity of proposed model through the experimental comparison between the classical Preisach model and the proposed one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.183-188
• /
• 2008

Engine control/performance model for helicopter simulator is one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the engine designers/manufacturers. The approaches in this study were to develop the basic model based on the available resources and to tune and verify it based on the ground/flight test results. The maintenance manuals of TB3-117 which is installed in KA-32T were reviewed and the components to be simulated for the engine control model were categorized and modeled. Piece-wise linear modeling method was used for the engine performance model. The engine performance data in the engine maintenance manuals were incorporated into the engine steady state performance tables, which were incorporated with the transfer functions for the dynamic performance. Engine control/performance model was compared and tuned with the ground/flight test results. It was verified that the fidelity of the model was within the tolerances in FAA AC120-63.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2239-2246
• /
• 2008

Engine control/performance model for helicopter simulator if one of the most important models which affect flight performance and handling quality. It is typical to develop the model based on the raw data and models from the engine designers/manufacturers. The approaches in this study were to develop the basic model bated on the available resources and to tune and verify it based on the ground/flight test results. The maintenance manuals of TB3-117 which is installed in KA-327 were reviewed and the components to be simulated for the engine control model were categorized and modeled. Piece-wise linear modeling method was used for the engine performance model. The engine performance data in the engine maintenance manuals were incorporated into the engine steady state performance tablet, which were incorporated with the transfer functions for the dynamic performance. Engine control/performance model was compared and tuned with the round/flight test results. It was verified that the fidelity of the model was within the tolerances in FAA AC120-63.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.137-140
• /
• 2003

2관성 공진계는 전동기와 부하 사이에 탄성이 있는 동력 전달 체계를 포함하는 시스템으로 고속 제어시 진동이 발생된다. 이와 같은 2관성 공진계에 대해 궁극적인 출력이 되는 부하의 위치 및 속도는 측정하기가 어렵다. 이에 기존의 연구들은 추정기등을 이용하여 부하의 속도를 추정하여 이를 제어에 활용하는 방식으로 구성되어진다. 그러나 이와 같이 추정기를 사용하기 위해서는 정확한 모델이 필요하다. 본 논문에서는 다소 부정확 모델에 대해서도 매우 정교한 제어 성능을 갖는 반복 학습 제어를 이용하여 2관성 공진계의 위치 제어를 시도하고자 한다. 제시된 방법은 2관성 공진계에 대한 모델링이 정확하지 않더라도 진동 없이 정확한 위치 제어가 가능하다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.99-102
• /
• 2006

본 논문에서는 두 개의 서브 발전 시스템 (풍력과 태양광 발전 시스템)으로 구성된 하이브리드 발전 시스템의 구현을 위한 디지털 퍼지 제어기를 개발한다. 풍력과 광전자 발전기에서 V-I 특성은 비선형 관계를 보여주기 때문에, 비선형 시스템 제어에 많은 장점을 가진 퍼지 모델 기반 제어기를 사용한다. 그리고 마이크로프로세서 기반 제어 시스템 구현하기 위해서 본 과제에서는 디지털 재설계 기법을 통해 디지털 퍼지 제어기를 설계하게 된다. 마지막으로, 하이브리드 발전 시스템에서 최대 전력 추종과 배터리 상태를 일정하게 유지하기 위해서 세 가지 모드 상태에서 제어 목적이 변화하도록 시스템을 구성하게 된다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.602-605
• /
• 2003

분산전원용 계통연계 인버터가 효율적인 분산전원으로 사용되기 위해서는 기존 계통과 협조 운전이 필요하다. 따라서 전류제어 외에 무효전력의 제어, 계통과 연계시의 PLL 제어, 단독운전 방지 제어 등의 다양한 기능이 필요하다. 그러나 단상 시스템의 경우, 3상 시스템과 달리 교류전력을 다뤄야 하므로, 제어 시 위상 지연이 발생하게 되고 무효전력을 제어하기 어려운 문제점등이 발생된다 따라서 본 논문에서는 이러한 문제점을 해결하기 위해 dq 모델을 단상시스템에 적용하여 단상 제어의 문제점을 보완하였다.