• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.23-32
• /
• 2023

Probabilistic and deterministic analyses are implemented for the armor units of rubble foundation mound of composite breakwaters which is needed to protect the upright section against the scour of foundation mounds. By a little modification and incorporation of the previous empirical formulas that has commonly been applied to design the armor units of foundation mound, a new type formula of stability number has been suggested which is capable of taking into account slopes of foundation mounds, damage ratios of armor units, and incident wave numbers. The new proposed formula becomes mathematically identical with the previous empirical formula under the same conditions used in the developing process. Deterministic design have first been carried out to evaluate the minimum weights of armor units for several conditions associated with a typical section of composite breakwater. When the slopes of foundation mound become steepening and the incident wave numbers are increasing, the bigger armor units more than those from the previous empirical formula should be required. The opposite trends however are shown if the damage ratios is much more allowed. Meanwhile, the reliability analysis, which is one of probabilistic models, has been performed in order to quantitatively verify how the armor unit resulted from the deterministic design is stable. It has been confirmed that 1.2% of annual encounter probability of failure has been evaluated under the condition of 1% damage ratio of armor units for the design wave of 50 years return period. By additionally calculating the influence factors of the related random variables on the failure probability due to those uncertainties, it has been found that Hudson's stability coefficient, significant wave height, and water depth above foundation mound have sequentially been given the impacts on failure regardless of the incident wave angles. Finally, sensitivity analysis has been interpreted with respect to the variations of random variables which are implicitly involved in the formula of stability number for armor units of foundation mound. Then, the probability of failure have been rapidly decreased as the water depth above foundation mound are deepening. However, it has been shown that the probability of failure have been increased according as the berm width of foundation mound are widening and wave periods become shortening.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.87-97
• /
• 2003

외해로부터 내습하는 파랑을 차단하므로서 해안의 세굴, 침식 등을 방지하고 항내의 정온을 유지하고 항만시설물을 보호하기 위하여 축조되는 방파제, 호안 등의 구조물 형식에는 경사제, 직립제, 혼성제 등 여러 가지가 있다 이 중 경사제는 표면을 파력에 충분히 대항할 수 있는 크기의 사석이나 콘크리트 블록을 쌓아 파랑을 경사면에서 쇄파시켜 에너지를 소멸시킴으로서 소파기능을 발휘한다. (중략)

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.317-322
• /
• 2003

The Sectional and Spatial failure modes are discussed using the experimental data with long crest wave and multi-directional waves considering the failure modes occurring around the rubble-mound breakwater. The spatial & sectional stability and failure mode around the rubble-mound structures with construction progress can be summarized as follows: 1) The rubble mound structures at basic construction step was occurred serious failures when ${\xi}$ was about 6.5. 2) It was clarified that the failure modes at the round head of detached breakwater are classified as failure by plunging breaking on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached break water. 3) The failure mode was found in the lower wave height than the design wave by the breaker depth effect. 4) The failure on the slope were also developed at the lee side of the round head because diffracted wave propagated into the behind area by grouping effect of multi-directional irregular wave.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.2
• /
• pp.116-126
• /
• 2003

In this study, a method that leads to make a simple decision on important parameters in analysis of wave field in permeable rubble-mound, block-mound breakwater, such as penetration velocity of incident waves and resistance coefficient, is introduced. A model that could analyze wave field of permeable breakwater in harbor, by applying these methods and arbitrary transmission coefficient boundary condition to a time-dependent mild-slope equation, was introduced. The verification of the model was done by carrying out 2-D physical model test on permeable breakwater, measuring the change in water surface elevation, comparing the computation result with time series, and comparing the result gained from the 3-D physical model test on permeable block-mound breakwater in an field harbor with the computation result in terms of regional wave height ratio in a harbor.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.171-175
• /
• 2000

국내 시공사례가 가장 많은 사석식 경사제는 피복층(cover layer), 중간피복층(underlayer), 그리고 내부사석(core and bedding layer)으로 이루어져 있다. 이 중 중간피복층의 재료는, 피복재의 중량(W)에 대한 중량비 W/10에서 W/15의 자연석을 이용하여 시공하는 것이 보통이다. 그러나, 항만의 대형화에 따른 설계파의 증가로 이형블록과 같은 피복재의 소요 중량이 증가하는 추세이며 이에 따른 중간피복재의 소요중량도 크게 되어 그에 만즌 자연석을 구하기 어려운 실정이다. (중략)

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.109-116
• /
• 1988

This study was aimed at determining a regime of flow through rubble mound dike consisted of all sized quarrystons, and deriving a relationship between hydraulic gradient (I) and mean flow velocity (V) through the dike. The analysis was carried out with the data observed after final gap closing of the Haenam Sea dike from May, 6 to May, 14, 1987. The resu]ts are summarized as follows: 1. The regime of flow would be defined as the turbulent flow. 2. As to the relationships, two kinds of formula that are exponential and binomial were obtained. Exponential formula: I=2.099V 1.2888 Binomial formula: I=0.6113V+5.5235V$^2$ 3. Correlation coefficient of the former was 0.824 and that of the latter was 0.821, and the deviations between observed data and estimated were 0.0070 and 0.0064 respectively. 4. Comparing the correlation coefficient, both the equations have the same correlation coefficients, but in case of the deviation the binomial equation was better than the exponential equation. Therefore, the binomial equation is proposed for analyzing the flow through rubble mound dike.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.1
• /
• pp.7-16
• /
• 1990

불규칙파(不規則波)의 피습(被襲)에 의한 사석제(捨石堤)의 호안공(護岸工)이나 방파제(防波堤)에 대하여 화란(和蘭)이 Delft수이시험소(水理試驗所)에서 종합적(綜合的)인 모형연구(模型硏究)를 실시(實施)한 결과(結果) 새로운 안정도(安定度) 공식(公式)을 수립(樹立)하였다. 이들 공식(公式)은 파랑주기(波浪週期), 폭풍지속기간(暴風持續期間) 및 구조물(構造物) 투수성(透水性) 등의 파라미터(媒介變數)가 포함(包含)되어 있으므로 파손(破損)의 정도(程度)가 분명(分明)하여 Hudson형(型) 공식(公式)의 주(主)된 단점(短點)을 해결(解決)하였다. 이들 신공식(新公式)의 개발(開發)은 이전(以前)에도 기술(記述)된바 있으며 본론설(本論說)에는 재론(再論)하지 않는다. 안정도공식(安定度公式)은 파라미터로서 적용(適用)이 가능(可能)한 범위(範圍)가 부여(附與)되었으며, 이들 공식(公式)은 결정론(決定論) 및 확률론적(確率論的) 양자(兩者) 다같이 사용(使用) 방법(方法)이 제시(提示)되어 있다. 결정론적(決定論的) 설계절차(設計節次)는 여러가지지 파라미터의 영향(影響)을 곡선(曲線)으로 나타내어 졌으며 확률론적(確率論的) 설계(設計)는 구조물(構造物)의 내구연수기간내(耐久年數期間內)에 파손도(破損度)의 초과확률(超過確率)을 나타낸 곡선(曲線)으로 되어있다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.290-293
• /
• 2003

경사형 방파제(rubble-mound breakwater) 설계시 제체의 장갑층으로 포설하는 블록의 규모 산정이 가장 중요한 항목인데, 경사제에서 파의 작용을 직접 받는 표층을 형성하는 개체의 중량 산정에 관하여는 오래 전부터 여러 공학자의 의해 연구되어 왔다. 대표적인 산정식들로서 barren식, Hudson식 Van der Meer식 등이 있으며, 최근 유동훈 등(2001)과 Yoo, et al.(2001)은 형태가 단순하면서도 정밀도가 높은 새로운 산정식을 개발하였다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.422-422
• /
• 2018

우리나라의 간척사업은 고려시대 중엽부터 서남해안에 다수 산재되어 있는 천혜적인 간척 적지를 대상으로 지속적으로 추진되어 국토확장 및 식량 자급달성에 기여하여 왔다. 그러나, 최근 들어 쌀 수급 등 농업정책의 변화, 비용에 대한 경제성 평가의 변화, 개발과 보전에 관한 이해당사자간의 대립 등으로 신규 간척사업의 추진이 어려워지고 기존 간척지의 토지이용 목적 변화와 이치수 기능개선을 목적으로 배수갑문을 확장하는 등의 사업이 추진되고 있다. 본 연구에서는 방조제 상류지역 및 지천에서 이상홍수 유입에 따른 방조제 안정성 검토를 실시하였다. 호내로 유입되는 빈도별 홍수량에 따른 각 지점별 수위변화를 이용하여 방조제 비상대처계획에 대한 재난관리 지표로 활용할 수 있는지를 확인한다. 이를 위해 선정된 방조제를 중심으로 빈도별 홍수량을 산정하여 수문학적 안정성을 검토하고, 빈도별 홍수량에 따른 호내의 홍수위 변화를 통하여 비상대처계획 시나리오를 구성하고자 한다. 새만금 유역의 수치모델링에 필요한 범위를 설정하고, 모델 구성 및 자료를 입력한 후 검 보정을 통하여 모델의 신뢰성을 검증한 후 모델운영 조건을 설정하였다. 새만금 종합개발계획(MP)이 완료되었을 경우를 가정하여 통합운영을 실시하였다. 호내 관리수위에 따른 100, 200, 500, PMF 홍수량 유입시에 호내 홍수위 모의를 수행하였다. 또한, 비상단계 중 초기단계인 '관심단계'를 "이상홍수 발생부터 관리수위 EL-1.5m까지"로 설정한다면 방조제 초기 재난대응이 유리해 질 것으로 판단된다. 또한, '주의단계'는 "관리수위 EL-1.5m부터 호내 관리홍수위 EL+1.5m까지"로 '경계단계'를 "호내 관리홍수위 EL+1.5m부터 제당 내측사석보호공 홍수위까지", '심각단계'를 "제당 내측사석보호공(만경유역 EL+4.5m, 동진유역 EL+2.5m) 이상의 홍수위"로 설정한다면 방조제 관리자에게 세부화된 정보 및 지표를 제공해 줄 것이라 판단된다. 방조제 비상상황 단계별 분류에서 이상홍수위 발생후의 시간을 수치모의를 통해 구분하였으며 정성적인 위기상황 판단이 아닌 구체적인 수치로 된 지표들을 방조제 위기상황 재난지표로 활용한다면 상황 관리자의 위기상황 판단과 대처를 위한 의사결정에 도움이 될 것으로 기대한다.