• Title/Summary/Keyword: 사석보호공

Search Result 34, Processing Time 0.028 seconds

Numerical Simulation for Bed Protection Design (바닥보호공 설계를 위한 수치모의)

  • Ha, Sung Won;Kim, Tae Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.345-349
    • /
    • 2016
  • 보본체와 물받이공을 보호하는 바닥보호공(bed protection)은 굴요성 구조(flexible structure)인 돌망태, 블록공, 사석 등으로 설치되어야 하며, 일반적으로 경제성과 시공성이 우수한 사석(riprap)이 많이 이용된다. 이때 사석의 안정성 확보를 위한 설계기준으로 국내의 경우 포설길이에 대해서만 제시하고 있으나, 외국의 경우 수심, 유속 등의 값을 기초로 사석의 크기, 포설두께, 포설길이를 산정할 수 있도록 상세하게 제시하고 있다. 이와 같은 실정으로 국내 하천 실무자들이 바닥보호공을 설계 할 때 하천설계기준을 바탕으로 블라이 공식 또는 국립건설시험소 공식을 적용하여 사석의 포설길이는 산정하지만 사석의 크기, 중량 등의 제원들은 외국 설계기준을 차용하여 산정하거나 생략하는 경우도 있다. 따라서 하천설계기준의 보완 및 최근 국내 주요하천에서 발생하는 바닥보호공 유실, 침하 등의 문제를 해결하기 위한 연구가 필요하다. 본 연구는 전산유체동역학(Computational Fluid Dynamics, CFD) 모형인 FLOW-3D 모형을 이용하여, 바닥보호공 주변 흐름에 대한 수치모의를 수행하였다. 이때 난류 모형은 LES (Large Eddy Simulation) 모형을 적용하였으며, 바닥보호공에 작용하는 비교적 작은 척도의 와(vortex)를 해상할 수 있도록 조밀한 격자를 부여하였다. 초기 수치모형 결과의 적정성은 수리실험 결과와 비교하여 판단하였으며, 수리실험을 잘 재현해내는 격자, 매개변수 등을 적용하여 보의 하류 수위 변화에 따른 유속, 난류강도 등에 대한 분석을 수행하였다. 본 연구 결과는 바닥보호공 설계를 위한 기초자료로 활용될 수 있으며, 향후 수리실험과 병행하여 국내 실정에 맞는 설계식 개발에 대한 연구가 필요한 것으로 보인다.

  • PDF

An Experimental Study to develope the Subsidence Equation for Riprap Protection around the Pier (교각에 설치된 사석보호공의 침하량 산정식 도출에 관한 실험 연구)

  • Ji, Un;Yeo, Woon Kwang;Lee, Won Min;Kang, Joon Gu
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.1B
    • /
    • pp.63-71
    • /
    • 2009
  • Riprap filter should be installed around the pier to prevent riprap subsidence due to sediment winnowing or leaching between the riprap and bed layers. However, riprap protection without filters is commonly applied in the field because of ambiguous specifications and technical and economical difficulties to install the filter layer. Therefore, the hydraulic experiments were conducted in this study to measure and analyze the riprap subsidence quantitatively with different conditions for thickness of riprap layer, approached velocity, sizes of riprap and bed material. As the velocity was increased and size of bed material and thickness of riprap layer were decreased, the subsidence was increased. Consequently, the dimensionless riprap subsidence equation was derived using the synthesized experimental results. The results of this study could be employed as a standard criterion or predictor to evaluate the subsidence stability.

An Experimental Study to Evaluate the Subsidence Stability of Riprap Protection without Filters (필터 없는 사석보호공의 유사이탈로 인한 침하 안정성 평가를 위한 실험 연구)

  • Ji, Un;Yeo, Woon-Kwang;Lee, Won-Min
    • Journal of Korea Water Resources Association
    • /
    • v.41 no.4
    • /
    • pp.445-454
    • /
    • 2008
  • Many countermeasures for local scour at bridge piers constructed on the river and sea have been developed and researched to protect piers against local scour. The most commonly employed method is riprap protection, which is sometimes required the filter installation between riprap and base layers. However, the construction of stone filters are really hard to perform in the field, require the high cost, or sometimes are impossible. The experimental modeling is conducted to analyze the riprap failure modes and the stability of riprap protection without filters based on the different approach velocity and riprap layer thickness conditions. Also, the stability index to evaluate the performance of riprap protection is developed using the experimental results. The cover and thickness of the riprap layer play a very important role in the stability and thicker riprap layers can prevent a total disintegration of the riprap layer effectively, especially due to winnowing failure.

An Experimental Study for the Empirical Equation to Quantify the Subsidence of Riprap Scour Protection at Downstream of Vertical Drop Structures (연직낙차공 하류부 사석보호공 침하량 산정식에 관한 실험 연구)

  • Kim, Chang-Sung;Kang, Joon-Gu;Yeo, Hong-Koo;Yeo, Woon-Kwang
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.5
    • /
    • pp.433-443
    • /
    • 2010
  • Drop structures that span the entire width of channels are installed to alleviate channel grades and have been constructed widely in Korean rivers. Aprons are normally installed and integrated with drop structures and bed protections are added on the downstream part of aprons to protect both drop structures and aprons. Scour occurring on aprons is reported to provide various habitats such as ripples and pools in natural rivers. This study focuses on the scour characteristics on an apron integrated with a drop structure and the subsidence of a riprap protection. The scour depth on the downstream part of the drop structure is found to increase with the increase of unit discharge; however, to decrease as the tail water depth gets deeper. Based on the experimental measurements, the subsidence of the riprap scour protection is calculated with respect to the thickness of riprap. Finally, the dimensionless empirical equation to quantify the subsidence of the riprap scour protection without filters at downstream of the vertical drop is suggested.

An Experimental Study for Determination of the Material Diameter of Riprap Bed Protection Structure (사석 바닥보호공 재료 입경 결정을 위한 실험 연구)

  • Rhee, Dong-Sop;Yeo, Hong-Koo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1036-1039
    • /
    • 2005
  • 하상유지시설의 하류에 설치되는 바닥보호공은 국내의 경우 일반적으로 사석(riprap)이나 돌망태(gabion mattress) 등을 이용하여 시공되고 있으며, 바닥보호공에 사용되는 재료는 유속에 따라 적절한 입경의 재료를 결정하여 사용하게 된다. 1970년대 중반부터 적절한 하상보호공 재료를 결정하기 위한 연구는 사석, 돌망태, 콘크리트 보호 블록 등에 대하여 순차적으로 이루어져 왔다, 초기 연구는 주로 사석에 대해서 이루어졌으며, 중량과 유속 관계를 이용하여 사석 입경 결정 공식을 제안하였으며, 점차 수심 및 하상 경사, 난류 강도 등을 고려하여 재료 입경 결정 공식을 정밀화시켜왔다. 공식에 난류 강도를 고려하기 시작하면서, 단순한 하상보호공 재료를 결정하기 위해서 제안되었던 공식들은 하천 구조물 하류에 설치되는 바닥보호공으로 관심의 대상이 옮겨가기 시작하였다. 기존의 공식들이 일반적인 평탄한 하상보호공으로부터 구조물 하류의 바닥보호공 까지 그 적용이 확장되었던 반면에, Escarameia와 May는 연구의 대상을 수리구조물 하류의 강한 난류 흐름이 발생하는 구간으로 범위를 한정하여 연구를 진행하였으며, Izbash 형태의 식을 기초로 하여, 난류 강도가 주요 변수가 되는 입경 결정 공식을 제안하였다. 본 연구에서는 Escarameia와 May의 연구 결과를 기초로 하여, 국내 하상유지시설 하류에 설치되는 사석 바닥보호공 재료의 입경을 결정하기 위한 실험을 수행하였다. 하천설계기준을 만족하는 실험용 보를 설치한 후 유량 및 실험에 사용된 사석의 입경을 변화시키면서, 유속을 측정하여, 입경별 한계 유속(threshold velocity)의 상관관계를 분석하였다. 실험 결과, Escarameia와 May가 제안한 공식을 더 확장하여 적용할 수 있는 실험 공식으로 개선하였으며 다양한 조건에 대한 실험을 수행하여 보다 정밀한 공식으로 개선할 수 있었다.$10,924m^3/s$ 및 $10,075m^3/s$로서 실험 I의 $2,757m^3/s$에 비해 통수능이 많이 개선되었음을 알 수 있다.함을 알 수 있다. 상수관로 설계 기준에서는 관로내 수압을 $1.5\~4.0kg/cm^2$으로 나타내고 있는데 $6kg/cm^2$보다 과수압을 나타내는 경우가 $100\%$로 밸브를 개방하였을 때보다 $60\%,\;80\%$ 개방하였을 때가 더 빈번히 발생하고 있으므로 대상지역의 밸브 개폐는 $100\%$ 개방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도

  • PDF

Riprap Scour Countermeasures around Nonuniform Bridge Piers (불균일단면교각 주위의 사석 세굴 보호공)

  • Yun, Tae-Hun;Park, Gi-Du
    • Journal of Korea Water Resources Association
    • /
    • v.33 no.4
    • /
    • pp.385-392
    • /
    • 2000
  • An experimental investigation was conducted to determine the effect of a nonuniform pier on the stability of riprap placed around bridge piers. A nonuniform pier is one of which the cross-sectional dimension varies over the length of the pier and comprises a cylinder of diameter bp placed on a larger diameter of foundation bf. and the stability of riprap are significantly influenced by the height of foundation z. The critical height of foundation is defined as the height of foundation which has the same critical velocity to that of uniform pier without foundation, and it was found to be zc=0.8bf. For z

  • PDF

A formula for the Decision of the Riprap Size for the Local Scour Protection around Bridge Piers (교각주위 국부세굴 방지를 위한 사석크기 결정 공식)

  • Choe, Gye-Un;Kim, Hyeon-Tae;An, Gyeong-Su
    • Journal of Korea Water Resources Association
    • /
    • v.34 no.6
    • /
    • pp.753-761
    • /
    • 2001
  • In this paper, the experiments to decide the riprap size for the local scour protection at bridge piers and the coefficients of attack angle were conducted. A formula for the decision of the riprap size and a figure for the coefficients of attack angle were suggested based upon the experimental results. The coefficients of attack angle indicate different values based on the variation of the length-width ratio of bridge pier and the coefficients are increased by the increment of the attack angle. In this paper, the experiments using the piers having the opening ratios of 90%, 92.86% and 95% were conducted. Also, the attack angles 0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$ as well as four different length-width ratios of the bridge pier were utilized. The suggested formula were compared with 6 different formulas and the riprap sizes calculated using the equation suggested in this paper indicate the similar patterns with the formula suggested by Richardson. The suggested formula in this paper can be widely applied in the riprap design for the local scour protection around the bridge pier with the consideration of the attack angle to the flow.

  • PDF