• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.4
• /
• pp.43-51
• /
• 2003

The purpose of this study was evaluate to the stability on cut slope of forest roads by forest environmental factors. The total of 19 environmental factors on cut slope of forest roads were investigated in about 42.74km constructed during 1987 to 1993 in Gyeongnam and Jeonnam province. The evaluation of slope stability in forest roads were conducted by the discriment analysis. The main factors influencing the stability of cut slope were significant in order of coverage, soil hardness, degree of slope, altitude, silt loam, convex(凸) and compound(凹凸). The centroids value of discriminant function in the stability and unstability area estimated to -1.194 and 1.127, respectively. The boundary value between two groups related to slope stability was -0.072. The prediction rate of discriminant function for stability evaluation of was as high as 90.4%.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1383-1387
• /
• 2005

사면의 식생이 초기에는 강우에 의해서 표면흐름, 지하수위 증가, 지표수의 침윤에 의해서 성장이 될 수 있으나, 시간이 경과함에 따라 식생에 의한 사면의 안정성을 확보 하는 데에는 큰 영향을 미치지 못한다. 즉, 사면의 식생을 복우언시켜 식물근(뿌리)에 의해서 사면을 안정화 시키기 위해서는 사면의 위치, 고도 및 방향 등에 따라 적응할 수 있는 식물의 선택과 성장에 충분한 수분을 보습할 수 있는 구조의 사면계획과 구조물 설치가 필수적이다. 본 연구에서는 절$\cdot$성토면에서 경사면의 붕괴를 방지하고 식생을 복원하는 방법으로 Mattress Gabion을 제안하였다. 정형화되고 유연성 있는 다공성 Mattress 구조를 통한 식생의 복원은 사면의 안정과 환경친화적인 목적을 모두 만족할 수 있었다. 특히, Gabion 근고공이 설치된 이후에 공극이 큰 Mattress 구조물을 중심으로 식물의 뿌리를 지반에 직접 연결하거나, 식생 활착이 어려운 암반 절취 사면에서도 Mattress 옹벽을 통해서 식물이 양질의 흙에 직접 활착할 수 있도록 설계한 사면 Mattress의 경우는 사면의 안정성 증대와 아울러 지하수의 표면흐름과 투수 및 침윤에 의한 식물의 성장피해를 최소화하고 시간이 지날수록 식생에 의해서 Mattress Gabion 옹벽이 내구성과 유연성을 유지할 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.643-656
• /
• 2012

There has been an increase for the landslide areas and restoration expenses due, in large part, to the increased locally heavy rains caused by recent climate change as well as the reckless development. This study carried out a slope stability analysis by the application of distributed wetness index, using the GIS-based infinite slope stability model, which took the root cohesion effect into consideration, for part of Mt. Umyeon in Seoul, where landslide occurred in July 2011, in order to compensate the defects of existing analysis method, and subsequently compared its result with the case on the exploitation of lumped wetness index. In addition, this study estimated the distributed wetness index by methodology, applying three methods of specific catchment area calculation: single flow direction (SFD), multiple flow direction (MFD), and infinity flow direction (IFD), for catchment area, one of the variables of distributed wetness indices, and finally implemented a series of comparative analysis for slope stability by methodology. The simulation results showed that most unstable areas within the study site were dominantly located in cutting-area surroundings along with the residential area and the mountaintop and unstable areas of IFD and lumped wetness index method were similar while SFD and MFD provided smaller unstable areas than the two former methods.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.199-208
• /
• 2001

본 연구의 목적은 교대가 설치된 지반의 사면안전율과 교대측방변위의 관계를 분석하여 교대의 측방이동 판정기준을 마련하고자 함에 있다. 이를 위하여 국내의 연약지반에 설치된 30개 교대의 측방이동사례를 조사하고, SLOPILE (Ver 2.0)프로그램을 이용하여 교대의 측방변위와 교대기초말뚝의 사면안정효과를 고려한 사면안정해석을 실시한다. 해석결과 교대기초말뚝의 실측측방변위를 고려할 경우 1.8이상 되어야 한다. 또한, 교대기초말뚝의 허용측방변위량에 따른 사면안정 해석결과, 교대의 허용측방변위가 작게 규정될수록 사면안정성에 기여하는 말뚝의 효과는 감소하고 있음을 알 수 있다.

• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.235-241
• /
• 2004

사면활동은 삼차원적인 토괴 혹은 암괴의 입체적 움직임의 산물이며 여러 가지 복잡한 지질학적 요인에 의하여 발생하고 있다. 하지만 사면안정해석은 일반적으로 이차원적으로 수행됨으로써 해석모델을 극히 단순화시키고 있다.(중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.06a
• /
• pp.51-62
• /
• 1998

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.98-107
• /
• 2020

In surface mining, it is very important to create a mining area for economical mining. This study examined the contribution of design factors on slope stability with different slope design and blasting conditions. The design factors were the properties of the rock, the slope angle and the bench height, and the blasting conditions were reflected at different explosive weight and distances. The safety factor of slope was calculated by shear strength reduction method through 3D modeling, and the contribution rate of rock slope was 94.8%, which is relatively higher than other design factors, slope angle 0.89%, bench height 0.58%, and blasting It is shown that it affects about 3.73%, and it can be seen that blasting at a close distance can affect the stability of the slope.

• Journal of the Korean Society for Railway
• /
• v.14 no.1
• /
• pp.24-30
• /
• 2011

Conventional slope stability analysis is focused on calculating minimum factor of safety or maximum probability of failure. To minimize inherent uncertainty of soil properties and analytical model and to reflect various analytical models and its failure shape in slope stability analysis, slope stability analysis method considering simultaneous failure probability for multi failure mode was proposed. Linear programming recently introduced in system reliability analysis was used for calculation of simultaneous failure probability. System reliability analysis for various analytical models could be executed by this method. For application analysis for embankment, the results of this method shows that system stability of embankment calculate quantitatively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03a
• /
• pp.248-267
• /
• 2004

우리나라의 경우, 국토 면적은 제한되어 있고 특히 밀집한 도심지 인근 공사 시에 사면 경사를 결정하는 것은 쉬운 일이 아니다. 또한 주어진 조건 내(부지의 부족, 환경고려 등)에서 이미 결정되어진 사면경사를 어떻게 유지하느냐 하는 것이 사면에 종사하는 기술자들의 임무인 것이다. 지금까지의 사면분화에 대한 접근 이론들이 너무 고전적인 방법에 치우쳐 있는 경향이 없지 않았다. 또한 기술자들의 보수주의적 경향으로 새로운 이론의 접촉을 멀리한 것도 부인할 수 없다.(중략)