• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.548-556
• /
• 2009

In order to evaluate applicability of rock cut-slope investigation system, typical clinometer and photogrammetry investigation system were used for rock slopes; first for 7 discontinuities, and secondly, 10 discontinuities, and the results were compared. The first verification was performed depending on discontinuity joint shapes and slope angles, and the second verification was performed depending on shot time and shot locations. The results showed that differences of dip direction $1^{\circ}{\sim}4^{\circ}$, dip $0^{\circ}{\sim}4^{\circ}$. In the second verification test, the differences of dip direction was $0^{\circ}{\sim}6^{\circ}$, and dip $0^{\circ}{\sim}6^{\circ}$. The photogrammetry method for rock slope survey system is quite reliable when clinometer generally shows ${\pm}10^{\circ}$ errors due to surface roughness and investigator.

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.35-43
• /
• 2021

Slope optimization aims to maximize the slope angle in an open pit mine, resulting in subsequent profits from additional ore extraction. The large open pit mines have adopted the advanced technologies to increase slope angle until they ensure the slope stability. This paper introduces a current stage of slope optimization efforts and best practices from the open pit mines.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.121-131
• /
• 2014

The stability of rock slope is mainly controlled by the orientation and shear strength of discontinuties in rock mass. Therefore, in kinematic analysis, the orientation of the combination of discontinuities and slope face is examined to determine if certain modes of failure can be occurred. In previous kinematic analysis, a representative orientation of the slope face and mean orientation of discontinuity set were used as input parameters. However, since the orientations of slope face varies according to locations of measurement, the representative slope face orientation could cause misunderstanding for kinematic instability. In addition, since the orientations of each discontinuity are scattered in the same discontinuity set, there is the possibility that uncertainties are involved in the procedure of kinematic analysis. Therefore, in this study, the detailed digital topographic map was used to obtain the orientation of slope face. In addition, the probabilistic analysis approach was utilized to deal properly with the uncertainties in discontinuity orientation. The proposed approach was applied to steep slopes in mountain road located in Baehuryeong, Chunncheon city, Gangwon-Do. The analysis results obtained from the deterministic and probabilistic analysis were compared to check the feasibility of proposed the analysis.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.270-278
• /
• 2001

Two numerical methods such as DEM and FDM were adopted to analysis of rock slope stability, of which dimensions are about 150 m(length), 58 m(height), 70°dip, in Halla limestone mine. For this rock slope stability analysis, strength reduction method was used to calculate the safety factor of slope through numerical method. To keep the rock slope safely, it is proposed to reduce the height of the rock slope from 58 m to 45 m and to reduce the angle of the slope from 70°to 55°, too.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.397-406
• /
• 2003

Several sensor systems are used to estimate the reinforcing effect of stabilizing pile in slopes, and to find a failure surface in slopes effectively. FBG(Fiber Brags Crating) sensor, V/W(Vibrating Wire) sensor and inclinometer have shown a great potentiality to serve real time health monitoring of the reinforcing structures. Field tests and test results have shown great solutions for sensor systems of Smart Structures. The purpose of this research is to seek for the relationships among the slope movement and the reinforcing effect of stabilizing pile, and the strain distribution of stabilizing pile in a active zone by analyzing the data from the in-situ measurement so that the possible failure surface should be well defined based on the relationships. The field test results have shown that the data by FBG sensor are well coincided with those of V/W sensor and inclinometer, and the reinforcing effect of the stabilizing pile is good enough.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2007

Though the stability analysis of soil slopes widely employs the limit equilibrium method, the study on the jointed rock slopes must consider the direction of joint and the characteristics of Joint at the same time. This study analyzes the result of the change in the factors which show the characteristics of discontinuity and the shape factor of rock slopes, and so on, in an attempt to validate the propriety as to the interpretation of jointed rock slope stability which uses the general finite element program. First, the difference depending on the flow rules was compared, and the factor effect study was conducted. The selected independent variables included the direction of joint which displays the mechanical characteristics of discontinuity, adhesive cohesion, friction angle, the inclination and height of rock slope which reveal the shape of slope and surcharge load. And the horizontal displacement was numerically interpreted at the 1/3 point below the slope, a dependent variable, to compare the relative degree of factor effects. The findings of study on factor effects led to the validation that the result of horizontal displacement for each factor satisfied various engineering characteristics, making it possible to be applied to stability interpretation of jointed rock slope. A modelling is possible, which considers the application of the result of real geotechnical surveys & laboratory studies and the non-linear characteristics when designing the rock slope. In addition, the stress change which may result from the natural disaster, such as precipitation, and the construction, can be expressed. Furthermore, as the complicated rock condition and the ground supporting effect can be considered through FEM, it is considered to be very useful in making an engineering decision on the cut-slope, reinforcement and so on.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.472-472
• /
• 2015

토양수분은 수문학에서의 물 순환을 비롯한 여러 다양한 자연과학적 분야에 중요한 인자로 활용되고 있다. 본 연구의 대상사면인 지형학적, 토양학적으로 복합적이고, 불균질한 작은 산지사면에서 토양수분의 시공간적 분포에 대한 지형, 토성인자의 영향에 대해 파악하고자 한다. 토양수분은 TDR방식의 모니터링 시스템을 통해 안정적으로 측정이 되었으며, 각 영향인자들은 사면의 지형분석 및 토성분석을 실시하여 확보되었다. 지형인자는 습윤지수, 기여사면면적, 지역적 경사 그리고 토양깊이 인자이며, 토성은 모래, 실트, 점토함량, 가밀도 값을 이용하였다. 사면의 측정된 토양깊이별 토양수분의 시공간적 변동에서의 각 인자와의 상관분석 및 다변량 분석을 통해, 각 영향인자들의 관련성 평가하였다. 사면 전체측정지점들의 토양수분의 시공간적 분포와 영향인자의 상관분석을 통해서 토양수분의 결정에는 지형보다는 토성의 영향이 지배적으로 나타났지만, 모래함량이 높은 토성을 가진 측정지점들에 한해 분석한 결과에서는 지형의 영향은 증가하였고, 토성의 영향은 오히려 줄어들었다. 토양깊이별 상관분석에서는 토양깊이 10cm의 각 인자와의 관련성이 30, 60cm보다 높은 것으로 나타났다. 토양수분변화에 따른 각 인자와의 상관계수 변화는 토양수분이 약 28~32%정도의 포화되기 전의 습윤한 조건일 때, 각 인자들과의 상관성이 증가한 것으로 나타났다.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.559-568
• /
• 2013

Surface compaction significantly impacts runoff and soil erosion under rainfall since it leads to changes of soil physical characteristics such as increase of bulk density and shear stress, change of microporosity, and decrease of hydraulic conductivity. This study addressed surface compaction effects on runoff and soil loss from bare and disturbed soils that are commonly distributed on construction sites. Thirty-six rainfall simulations from three replicates of each involving rainfall intensities (68.5 mm/hr, 95.6 mm/hr) and plot gradients ($5^{\circ}$, $12.5^{\circ}$, $20^{\circ}$) were conducted to measure runoff and soil loss for two different soil surface treatments (compacted surface, non-compacted surface). Compacted surface increased significantly soil bulk density and soil strength. However, the effect of surface treatments on runoff changed with rainfall intensity and plot gradient. Rainfall intensity and plot gradient had a positive effect on mean soil loss. In addition, the effect of surface treatments on soil loss responded differently with rainfall intensity and plot gradient. Compacted surfaces increased soil loss at gentle slope ($5^{\circ}$) while they decreased soil loss at steep slope ($20^{\circ}$). These results indicate that there exists transitional slope range ($10{\sim}15^{\circ}$) between gentle and steep slope by surface compaction effects on soil loss under disturbed bare soils and simulated rainfalls.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.343-356
• /
• 1994

When most of the industry and social indirect facilities such as the large structure, power plant or road, rail-road are constructed, the new slope may lead to the slope failure. The failure models for slopes have been developed by using the results of in-situ and laboratory tests to investigate the mechanisms and types of the slope failure. The safety factor of a slope may be obtained based on the proposed model and the slope can be reinforced to meet the design criteria. The slope should be reinforced by using the optimum model that properly reflects the site condition, the method of reinforcement includes the increased safety factor either by decreasing a slope angle or by reinforcing the slope.