• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.271-277
• /
• 2007

To find out the anomalous zone in cut slope composed of phyllite and shist, we performed resistivity tomography using a pole-dipole way. The electrical distribution that propagates from a current source in lower part of slope is measured by a potential electrode in upper part of slope. Apparent resistivity data are inverted with an iterative regularized inversion method to reconstruct 3D resistivity image. By comparing with the resistivity images in relation to each section, the images of anomalous zone correspond to their positions represented in cut slope. Therefore, the application of resistivity tomography in cut slope is useful to recognize the extension of anomalous zone.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.137-137
• /
• 2017

우리나라는 산지가 64%를 차지하고 있기 때문에 토양침식 위험성이 큰 급경사지가 많다. 산지사면 토양은 대부분 사질토와 사양토로 이루어졌다. 급경사면에서의 토양침식이 많이 발생함에도 이에 대한 연구결과는 부족한 실정이다. 본 연구에서는 사양토로 구성된 나지사면에 대한 토양침식 특성을 파악하고자 강우모의 실험을 수행하였다. 강우모의 실험의 강우강도는 전국의 확률강우분포 3~200년 빈도의 30분 강우강도인 60mm/hr~130mm/hr의 범위였다. 사면경사는 급경사지 범위을 대표하는 $24^{\circ}$와 $28^{\circ}$에서 실험을 하였다. 실험은 발생하는 지표유출과 지표하유출를 수집하여 측정하였으며, 지표표면에 잉크를 뿌린 다음 실험을 동영상 촬영하여 속도를 측정하였다. 지표유출량을 건조로에 넣고 건조시켜 토양침식량을 측정하였다. 그리고 강우운동에너지는 광학디스트로메터(Pasivel)을 이용하여 측정하였다. 강우운동에너지를 측정한 결과 $800J/m^2{\sim}1700J/m^2$ 범위였다. 강우강도가 클수록 지표유출량과 토사유출량은 증가하였다. 경사가 증가함에 따라 지표유출량은 큰 변화가 없으나, 토양침식량은 크게 증가하였다. 지표하유출량은 강우강도와 경사가 증가하여도 큰 변화가 없었으며, 강우 발생이 멈추면 즉시 감소하였다. 사양토의 점토성분이 강우의 침투를 저해하고, 모래보다 많은 양의 물을 함유하는 있는 것으로 파악 되었다. 그러나 사질토보다 토양입자가 작은 사양토에서 상대적으로 많은 토양침식이 발생하였다. 강우에너지가 증가하면 유사농도는 감소하는 경향을 보였다. 이는 강우에너지가 증가함에 따라 지표유출량의 증가율에 비해 토양침식량의 증가율이 작기 때문인 것으로 판단된다.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2008

In this research, model tests have been performed for researching the seepage characteristics in the finite soil slope during the rainfall using a manufactured rainfall simulator. On the basis of the results, it has been analyzed how to change the seepage characteristics due to the duration time of rainfall. We are found that the pore-water pressure was gradually increased as increasing the duration time of rainfall. Specially, at the beginning of rainfall, the pore-water pressure in the middle surface of slope was measured larger than any point. As increasing the duration time of rainfall, the pore-water pressure at the inner part of slope was increased greatly at the collapse due to infiltrating the pore-water within the slope. In the research, it was not easy to get various test results because measuring instruments are high sensitivity and difficult to handle. For the future, the model test results are needed for the various slope angle.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.9-17
• /
• 2004

In recent years slope failure due to heavy rainfalls or local downpours usually accompanied by typhoons has increasingly occurred in Korea. Also, the damages caused by slope failure have a tendency to be more disastrous than before. This study has been conducted to prepare an early warning system for slope failure by : (1) analyzing types and causes of slope failure, (2) examining the published evaluation criteria for slope stability, (3) estimating slope stability by considering the properties of slope-forming materials as well as the topographical and geological properties of slopes, and (4) determining the most important variables of affecting the stability of the slope under consideration. The data on the variations of slope conditions measured by an automatic in-situ measurement system and then transmitted to the central analysis system by using an internet. The most important variables can be back-calculated in the central system and compared with the values for the first and second management criteria. These management criteria should be modified and corrected continuously in the future by accumulated data and knowledge related to the early warning system for slope failure.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.85-92
• /
• 2001

본 논문에서는 암굴착시 발파에 의한 암반사면의 균열방지 및 사면안정 재고를 위하여 대 구-포항간 고속도로 건설현장에서 시험발파를 실시하고 그 결과를 분석하여 천공깊이별 안전 발파패턴을 제시하였다. 또한 현지 탄성파 속도를 측정하여 발파에 의해 암반에 미치는 균열상태를 조사한 결과 탄성파속도의 감소가 40 ∼ 53%로서 암반 중에 균열을 발생시킨 것으로 나타났다. 발파진동 계측결과를 분석하여 암반에 균열을 일으킬 수 있는 진동속도 기준을 설정하여 균열권 범위를 추정하였으며 사면의 기하학적 형상을 고려하여 손상대를 최소화 할 수 있는 적정 안전설계 패턴을 제시하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.17-23
• /
• 2008

A model slope was made to work out a way of detecting the sign of the occurrence of landslides and monitoring analysis was conducted to grasp the slope displacement of Terrestrial LiDAR equipment. As a result, the image of slope displacement could be monitored quickly and the accuracy of monitoring analysis was a deviation of 0.007m, 0.006m and 0.006m on average based on the figures prior to displacement after the first, second and third displacements, respectively. As the figures represent a very small deviation, they will be able to be used helpfully in measuring the displacement of actual slope in the future.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.517-528
• /
• 2009

Statistical analyses of cut-slope stability were performed over approximately 5.7 km section along the National road No. 25, which cross-cuts in NW-SE direction the Cheongwon and Boeun-Gun area, Chungbuk. A measure of slope-stability was established by using direct reinforcement and indirect protection methods in whole section. Orientations(dip/dip direction) of the slopes, foliations(bedding), cleavages and joints were measured in total of 30 slope sites. The results analyzed using stereographic projection indicate that major directions of the slopes come out predominantly in three directions: 1) $58^{\circ}/095^{\circ}$, 2) $60^{\circ}/296^{\circ}$ and 3) $59^{\circ}/212^{\circ}$. In analyses of dip direction and frequency of cut-slopes established by reinforcement and protection methods, slopes with dip direction of $80-120^{\circ}$ and $280-320^{\circ}$ mostly occur. However, slopes with dip direction of $0-80^{\circ}$(N and NW) and $120-160^{\circ}$(SE) are not distributed in the study area. Failure aspects were analyzed for three major directions of the slopes, respectively. The results of failure aspects analyzed indicate that slopes in the study area could generate various failures as the results of intersection and/or intersection combination among joints, foliations(bedding) and cleavages. However, possibility of failure in a slope of major direction No. 3 is statistically very low because of low frequency in total number of slopes with the direction and of formation of small scale-slopes geographically, although the slope might generate all aspects of failure-modes.

• Geotechnical Engineering
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1996

An instrumentation system is designed to observe the behavior of slope soil and stabilizing piles during heavy rains. Inclinometers, standpipe piezometers and strain gages are installed into a cut slope reinforced by a row .of piles for an apartment. The horizontal deflection and bending stress developed on the piles can be measured, respectively, by the inclinometers and strain gages installed in piles, while the horizontal deformation of the slope soil can be measured by the inclinometer installed in the soil across the open space between piles. The groundwater level doss not grow so sensitively during heavy rain. The behavior of piles and slope is 서footed by the wetting front, since the driving force of slope increases with the weight of slope soil above the wetting front. The stabilizing piles and the slope soil show elastic behavior during heavy rain.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.20-32
• /
• 2011

Failure aspects of cut-slope, which induce the sequential collapses during the excavation stage, have been analyzed. Slope rock structures are investigated by examining the orientations and positions of discontinuity planes calculated based on the BIPS image inside the boreholes. Drilled core log has been also used to identify the structural defects. Clay minerals of swelling potentials are detected through XRD analysis. Numerical analysis for slope stability has been performed by utilizing the joint shear strength acquired from the direct joint shear test. Cut-slope collapse characteristics have been studied by investigating the posture of failure-prawn joint planes and the stability of tetrahedral blocks of different sizes. Cross-section analysis has been also performed to analyze the cut-slope behavior and to estimate the amount of reinforcement required to secure the stability of cut-slope. Behavior of reinforced cut-slope is also investigated by analyzing the slope monitoring data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1137-1141
• /
• 2008

본 연구에서는 경기도 설마천 지역에 위치한 독립사면에서 토양수분을 연속측정한 결과를 분석하였다. 관측망의 설계를 통하여 선정한 위치에 탐침을 매설하고 공간적인 분포를 가진 시계열 형태의 데이터를 10cm 깊이에서 수집하였다. 전이함수 모형을 사면에서의 토양수분 전이과정에 대응하고, 이를 실제 측정한 데이터에 의해서 분석한 결과와 비교해 보았다. 전이 함수 모형은 강우 데이터를 입력변수로 하고 토양수분 시계열 데이터를 반응 변수로 하여 전개하였고, 시계열 모형의 전개는 크게 자료전처리, 모형구조의 규명, 모수추정, 모형진단 등의 과정을 통해서 적합한 모형을 도출하였다. 산지 사면에서의 토양수분을 전이함수에 의하여 전개한 모형은 토양수분의 깊이별 변화와 지형적 분포 양상에 따라 특색을 나타내었다. 또한 2003년 가을과 2004년 봄의 전이함수 모형 추정을 통하여 계절별 특성이 나타남을 알 수 있는데, 봄의 토양수분의 분포는 가을의 토양수분에 비하여 큰 변동성과 고차항의 반응양상을 보인다. 본 연구는 전이함수를 이용한 토양수분의 시계열 분석이 사면에서의 토양수분 변동특성을 지형적, 계절적 특성과 연계하여 이해하고 특성화하는 과정의 적절한 도구가 될 수 있음을 보여주고 있다.