• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.277-283
• /
• 2014

Fuzzy modeling is generally using the given data and the fuzzy rules are established by the input variables and the space division by selecting the input variable and dividing the input space for each input variables. The premise part of the fuzzy rule is presented by selection of the input variables, the number of space division and membership functions and in this paper the consequent part of the fuzzy rule is identified by polynomial functions in the form of linear inference and modified quadratic. Parameter identification in the premise part devides input space Min-Max method using the minimum and maximum values of input data set and C-Means clustering algorithm forming input data into the hard clusters. The identification of the consequence parameters, namely polynomial coefficients, of each rule are carried out by the standard least square method. In this paper, membership function of the premise part is dividing input space by using trapezoid-type membership function and by using gas furnace process which is widely used in nonlinear process we evaluate the performance.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1117-1119
• /
• 2003

기존의 사다리꼴형 브러시리스 직류 전동기(BLDCM)의 센서리스 제어는 전류전환 시점을 알기 위하여 홀 센서 대신 단자 전압과 중성점 전압을 이용한다. 하지만, 속도 제어를 위해서는 엔코더나 레졸바와 같은 센서를 사용해야한다. 2극기 BLDC 모터의 경우 단자전압을 이용한 위치정보는 모터 한 회전 당 12번의 신호가 출력된다. 엔코더 혹은 레졸바를 제거하고, 이 신호를 이용하여 속도 정보를 만들 경우, 속도를 만들기 위한 위치 정보의 펄스 간격이 넓게 되어 순시 속도를 만들지 못하게 된다. 이로 인하여 실제 속도의 변화를 민감하게 추정하지 못하게 된다. 따라서 이렇게 만들어진 속도 정보는 실제 시스템에서 사용할 수 없게 된다. 이러한 문제를 해결하려고 본 논문에서는 순시 속도 관측기를 사용한다 단자전압과 중성점 전압에 의한 위치정보를 가지고 순시 속도 관측기를 속도 제어 주기보다 빠르게 갱신함으로써 순시 속도를 예측한다. 또한 이 순시 속도는 속도 제어기로 피드백 되어 속도 센서리스를 실현한다. 이에 대한 타당성은 시뮬레이션을 통해 검증한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.88-91
• /
• 2012

본 연구에서는 다양한 형상의 수중방파제를 이용하여 고립파(지진해일)에 대한 파랑의 제어기능을 검토하였다. 먼저, 연구를 수행하기 위하여 Navier-Stokes 방정식에 기초한 RANS 모형을 사용하였다. RANS 모형에서는 VOF기법을 이용하여 자유수면을 해석하였고, 또한 조밀한 격자간격을 사용하여 수치실험을 실시하였다. 수중방파제의 형상에는 삼각형, 반타원형, 직사각형 및 사다리꼴형을 사용하여 각각의 수중방파제 위를 통과하는 고립파를 해석하였다. 고립파의 파고와 여러 가지 형태를 갖는 각각의 수중방파제의 높이를 조절하면서 수중방파제를 지나는 고립파의 투과율을 해석하였다.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.74-82
• /
• 2011

To do fuzzy modelling of a nonlinear process needs to analyze the characteristics of input-output of fuzzy inference systems according to the division of entire input spaces and the fuzzy reasoning methods. For this, fuzzy model is expressed by identifying the structure and parameters of the system by means of input variables, fuzzy partition of input spaces, and consequence polynomial functions. In the premise part of the fuzzy rules Min-Max method using the minimum and maximum values of input data set and C-Means clustering algorithm forming input data into the clusters are used for identification of fuzzy model and membership functions are used as a series of triangular, gaussian-like, trapezoid-type membership functions. In the consequence part of the fuzzy rules fuzzy reasoning is conducted by two types of inferences such as simplified and linear inference. The identification of the consequence parameters, namely polynomial coefficients, of each rule are carried out by the standard least square method. And lastly, using gas furnace process which is widely used in nonlinear process we evaluate the performance and the system characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.787-794
• /
• 2016

In this study, the exact rigidity and the free vibration of trapezoidal corrugated plate are analyzed by being based on the Kirchhoff's plate theory and the Ritz method. The previous rigidity of corrugated plate analyzed by considering just a geometric characteristic, a basic assumption and an equivalent idea can cause large errors in practical behaviors. Accordingly, the exact rigidity supplemented by correction factors of the theoretical rigidity is needed. Therefore an analysis on the exact rigidity and the free vibration using the rigidity for the plate is performed in this paper.

• Composites Research
• /
• v.29 no.6
• /
• pp.347-352
• /
• 2016

This work presents the free vibration characteristics of laminated composite corrugated rectangular plates using the analytical method. Because it is very difficult to determine its mechanical behavior of 3-dimensional corrugated structures analytically, the equivalent homogenization model is adapted to investigate the overall mechanical behavior of corrugated structures. The corrugated element can be homogenized as an orthotropic material. Both the effective extensional and flexural stiffness of this homogenized equivalent orthotropic material are considered in the analysis. The present analytical results are validated by those obtained from 3D finite element analysis based on shell elements. The natural frequencies and global vibration mode shapes obtained from present analytical and finite element analysis are presented. Some numerical results are presented to check the effect of the geometric properties.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1991

Stiffened plate structure, which is generally used in the various structural design to develope the load carrying capacity, is classified in two groups; one is the plate stiffened with stiffeners, the other is corrugated plate. In the studies on those structures, the studies on the stiffened plates with stiffeners have been much studied with both quantities and qualities according to requirements of the minimum-weight structural design and the development in many industrial fields, especially automobile, ship and aerospace fields, but the studies on the corrugated plates are undeveloped in comparison with the stiffened plates, and also the analytical stiffness on the corrugated plates remains as the imperfect. In the present studies, the analytical method on the stiffness of corrugated plates made by folding is proposed, and the stiffness equation of corrugated plates with some angle is derived and generalized. The purpose of the present study is to contribute to the design of corrugated plates and to determine the optimum aspect ratio for parameters that decide the aspect of corrugated plates.

• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.529-540
• /
• 2016

Objective: The objective of this study was to evaluate the osseointegration of narrow-diameter implant with trapezoid-shape and to evaluate the effect of coronal microthreads on trapezoid-shape narrow-diameter implant. Materials and Methods: The experimental narrow-diameter implants were classified into two groups according to absence or presence of coronal microthreads: trapezoid-shape narrow diameter implant (TN group) and trapezoid-shape narrow-diameter implant with microthreads (TNM group). They were installed alternately in bilateral mandible in three dogs. After 8 weeks, the animals were sacrificed. Resonance frequency analysis, removal torque test, and histometric analysis were performed. Results: Statistically higher implant stability quotient (ISQ) values were observed in TNM group than in TN group at the time of implant installation. However, significant ISQ values difference was not observed between groups at 8 weeks. Both groups showed significantly increased ISQ values at 8 weeks, compared to the time of implant installation. There was no significant difference between groups in removal torque test. Bone-implant contact ratio also showed no significant difference between groups in total and coronal part. Conclusion: Within the limitation of this study, it could be concluded that the trapezoid-shape design on narrow-diameter implant showed successful ossointegration, and the microthreads on coronal part did not result in significant bone-implant contact and biomechanical stability at 8 weeks.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.74-82
• /
• 2014

The purposes of this study is to investigate spatial structure characteristics of earthen walled fortresses based on topography, which are locational and Plane morphology, Cross sections of earthworks. Target areas of this study are 37 earthen walled fortresses which are designated as cultural properties. This study is conducted with methodologies of literature review, field investigation, investigation on topography materials and relation analyses of topography&spatial structure. The results from study on spatial structure of earthen walled fortresses are as follows. First, Earthen walled fortresses on flat topography were adjacent to water systems like rivers or streams. Plane morphology showed regular shapes. The cross section morphology presented trapezoid the most with earthworks of which outer and inner walls were built. Second, More than 70% of earthen walled fortresses on hilly topography had water system within close range of approximately 1.5km. Plane morphology was mainly with more than 73% of irregular types. Cross sections of earthworks were of morphology with more than 86% of bordered type and another type leaning against existing topography like mountains. Third, 59% of earthen walled fortresses in mountain areas had water system within their close range, which indicated that they depended on external water system less than those with hilly topography. Plane morphology was mainly with more than 67% of irregular types. Cross sections of earthworks were of monoslope method with more than 94% of bordered type and another type leaning against mountains.

• The Journal of the Korean dental association
• /
• v.56 no.5
• /
• pp.263-276
• /
• 2018

Long-term survival and prognosis of narrow-diameter implants have been reported to be adequate to consider them a safe method for treating a deficient alveolar ridge. The objective of this study was to perform case report of narrow-diameter implants with a trapezoid-shape in anterior teeth alveolar bone. A 50-year-old male patient presented with discomfort due to mobility of all of the maxillary teeth and mandibular incisors. Due to destruction of alveolar bone, four anterior mandibular teeth were extracted. Soft tissue healing was allowed for approximately 3 months after the extraction, and a new design of implant placement was planned for the mandibular incisor area, followed by clinical and radiological evaluation. Implant placement was determined using an R2GATE surgical stent. The stability of the implants was assessed by ISQ measurements at the first and second implant surgery and after prosthetic placement. At 1 and 3 months and 1 year after implantation of the prosthesis, clinical and radiological examinations were performed. Another 50-year-old male patient presented with discomfort due to mobility of the mandibular central incisors. For the same reason as in the first patient, implant placement was carried out in the same way after extraction. ISQ measurements and clinical and radiological examinations were performed as in the previous case. In these two clinical cases, 12 months of follow-up revealed that the implant remained stable without inflammation or additional bone loss, and there was no discomfort to the patient. In conclusion, computer-guided implant surgery was used to place an implant in an optimal position considering the upper prosthesis. A new design of a narrow-diameter implant with a trapezoid-shape into anterior mandibular alveolar bone is a less invasive treatment method and is based on the contour of the deficient alveolar ridge. Through all of these procedures, we were able to reduce the number of traumas during surgery, reduce the operation time and total treatment period, and provide patients with more comfortable treatment.