• Title/Summary/Keyword: 사각형 패치

Search Result 41, Processing Time 0.026 seconds

A Study on Design of Microstrip Patch Antenna for Mobile Communication Systems using IE3D (IE3D를 이용한 단일 급전 이동통신용 마이크로스트립 패치 안테나 설계에 관한 연구)

  • Park, Jong-Dae;Park, Byeong-Ho;Shim, Woo-Seop;Kim, Myeong-Dong;Seong, Hyeon-Kyeong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.10a
    • /
    • pp.316-319
    • /
    • 2012
  • In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (${\varepsilon}r$), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

  • PDF

Ka-band Microstrip Antenna Fed Circular Polarized Horn Array Antenna Design (평판형 안테나 급전구조를 이용한 원형편파용 도파관 배열안테나 설계)

  • Jung, Young-Bae
    • Journal of IKEEE
    • /
    • v.17 no.2
    • /
    • pp.140-144
    • /
    • 2013
  • This paper presents the novel design of circular polarized Ka-band horn array antenna. The element antenna of the arrya is composed of two parts, microstrip patch and square horn, and the microstrip patch is fed by corner truncated microstrip patch for circular polarization. The patch antenna has the role of a feeder and polarizer of the horn, thus the whole size of the horn antennae can be considerably reduced. The $1{\times}8$ horn array was designed and fabricated by the spacing of $0.9{\lambda}_0$ among the element horn. The element horn has typical gain of 8dBi and axial-ratio bandwidth of 4.9% at 3dB, and the minimum gain and axial-ratio bandwithd of the array is 14dBi and 8.2%.

Design of Sequentially-Rotated Array Antenna with Triangular Lattice (삼각형 격자를 갖는 순차 회전 배열 안테나의 설계)

  • 진경수;정치현;박병우
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.11 no.7
    • /
    • pp.1282-1290
    • /
    • 2000
  • The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.

  • PDF

Detection of a Crack on a Plate by IDT Type Lamb Wave Sensors (IDT형 Lamb 파 센서에 의한 판상의 균열 검출)

  • Kim, Jun-Ho;Roh, Yong-Rae
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.8
    • /
    • pp.483-490
    • /
    • 2010
  • In this paper, an Inter-Digital Transducer (IDT) type Lamb wave sensor is proposed to estimate the geometry and number of cracks on a plate structure, and its validity is checked through experiments. This IDT type sensor is more readily controllable than conventional patch type piezoelectric sensors to modify its operation frequency and directionality by altering its finger patterns. In this work, omni-directional annular IDT and highly directional rectangular IDT sensors are designed and fabricated. The IDT sensors are used to diagnose the length, number and orientation of cracks on an aluminum plate by measuring the amplitude and time of flight of Lamb waves. The results are analyzed to discuss the efficacy of the IDT sensors.

A Study on Fashion Design Using Geometric Pattern (기하학적 패턴을 활용한 패션디자인 연구)

  • 김신우;금기숙
    • Journal of the Korean Society of Costume
    • /
    • v.52 no.1
    • /
    • pp.53-67
    • /
    • 2002
  • 자연을 분석함으로써, 얻어진 기하학적 패턴은 이미 자연의 질서를 포함하고 있는 논리적이고 합리적인 기본형이기 때문에 간결하며 시각적으로 명쾌감을 준다. 이러한 기하학적 패턴은 복식 디자인에 있어서 20 세기 이후 여러 디자이너의 작품을 통해 재구성되어 현대적 이미지를 나타내는 중요한 모티브가 되고 있으며, 다양한 기법과 재료로 형성화하여 도입되고 있다. 이에 본 연구는 복식의 문양, 실루엣, 디테일에 사용되고 있는 기하학적 패턴을 연구함으로써 기하학적 패턴의 새로운 조형가치를 고찰하였다. 먼저 기하학의 용어 정의를 하였고 기하학적 패턴의 유형과 표현 기법을 분석하고 정리하여 현대 패션에 나타난 기하학적 패턴의 조형미와 그것을 바탕으로 패션 이미지를 추론해 보았다. 현대 패션에 나타난 기하학 패턴을 분석해 보면 유형으로는 첫째, 기하하적 문양으로 복식디자인에 있어서 주로 평면적인 형태로 많이 나타나지만, 크기가 다르고 동일한 기하학적 패턴을 조합시킴으로서 평면적인 형태에 공간감을 부여하기도 하며, 같은 기하학적 패턴의 표면이라도 배치구조에 의해 직선 혹은 사선으로 지각되므로 전혀 다른 이미지를 주었다. 또한 현대 패션에 나타난 기하학적 패턴이 종류는 세로 스트라이프, 가로 스트라이프, 격자 문양, 원, 사선 스트라이프, 마름모, 사각형, 삼각형 등의 순서로 많이 나타났다. 둘째, 색채는 단색의 복식에 강한 대비가 이루어지는 색상으로 표현되어 역동감과 유연한 운동감을 나타났다. 셋째, 기하학적 실루엣으로 단순한 라인의 형태를 나타내거나 입체적이고 부조적인 형태로 구성되어 전체적인 실루엣으로 사용되어 강한 조형감각을 보여주는데 원형을 이용한 실루엣이 가장 많았으며 사각형을 이용한 실루엣, 삼각형을 이용한 실루엣 순서로 나타났다. 넷째, 기하학적인 디테일로 복식의 어느 한 부분에 장식적으로 사용되거나 입체적 형태로 부출 되어 부조적인 느낌을 주는데 소매에 가장 많이 나타났으며 앞여밈, 칼라, 밑단, 주머니 순서로 장식되었다. 다섯째, 현대 패션에 표현된 기하학적 패턴의 표현기법으로는 프린팅, 퀼팅, piece기법, 패치워크, 엮기, 꼴라쥬, 아플리케 순서로 많이 나타났다. 위의 분석을 토대로 기하학 패턴을 활용한 디자인에 내재된 조형의지는 다음과 같이 정리되었다. 첫째, 기하학적 패턴이 지닌 단순성과 경직성을 완화하기 위하여 여러 가지 패브릭을 조합시켜 입체적인 표면효과로 시각적인 착시효과를 극대화하였다. 둘째, 표현기법은 입체파적 표현주의의 특성의 하나로 복시에 사용되는 소재의 왜곡으로 설명할 수 있으며, 새롭고 실험적인 소재의 도입으로 인해 의외성과 부조화를 유발시키는 통시에 유희직인 일면도 지니는 일종의 그로테스크를 나타냈다. 이상에서 정립된 조형의지를 바탕으로 현대 패션에 나타란 기하학 패턴은 절제된 단순함과 명확성으로 단순미가 유추되었고 강한 색상대비로 인한 시각적 집중효과로 주목성을 가지며 재현이 가능하므로 반복성이 유추되었다. 그리고 표준영역이 없는 창의적 표현으로 풍부한 독창성을 보여주고 있다. 또한 내재된 패션 이미지를 분석해 보면 정확함과 차가움의 의미를 지닌 이지적 이미지와 우주의 질서를 반영하는 상징적 이미지, 복잡한 자연으로부터 간결한 형태로의 경향성이 이루어낸 인공적 이미지를 느낄 수 있었으며, 미래적 이미지와 전통적 이미지의 상반된 개념의 이미지를 같이 내포하고 있음을 추론할 수 있었다. 이와 같이 현대 패션에 표현된 기하학적 패턴은 복식을 조형예술 분야로 확실히 인식시키고 발전시키는 데 중요한 촉매제 역할을 담당하고 있으며 또한 많은 디자이너들에게 창조적 욕구를 불러일으키고 영감을 주는데 중요한 모티브를 제공하고 있다.

Miniaturization of UWB Antenna Using Open Ended Stepped Slot (개방 종단된 계단형 슬롯을 사용한 UWB용 안테나의 소형화)

  • Lee, Ki-yong;Lee, Young-soon
    • Journal of Advanced Navigation Technology
    • /
    • v.21 no.4
    • /
    • pp.353-358
    • /
    • 2017
  • In order to reduce the size of the previous stepped slot antenna for UWB applications(3.1 ~ 10.6 GHz) to half, an open ended stepped slot antenna is proposed. The proposed antenna consists of a stepped slot etched on the ground plane as radiation part and a microstrip feed-line with rectangular patch on the top plane for wideband impedance matching. The proposed antenna is designed and fabricated on the FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm and size of $28.5{\times}32mm^2$. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) of the fabricated antenna is 7.99 GHz(3.01~11 GHz) which is sufficient to cover UWB band (3.1 ~ 10.6 GHz). In particular, it has been observed that antenna has a good omnidirectional radiation patterns and high gain over the entire frequency band of interest even though the size of the proposed antenna is reduced to half when compared with the previous antenna.

Ultra-Wideband Antenna Having a Frequency Band Notch Characteristic (주파수 대역 저지 특성을 갖는 초광대역 안테나)

  • Choi Woo-Young;Jung Ji-Hak;Chung Kyung-Ho;Choi Jae-Hoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.2 s.93
    • /
    • pp.199-203
    • /
    • 2005
  • In this paper, a novel compact and frequency band-notch antenna for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows good impedance bandwidth for ultra-wideband but has band notch characteristic for the frequency band of $5.15\~5.825\;GHz$ limited by IEEE 802.1la and HIPERLAN/2. To achieve both properties of wide band and band notch, the techniques of a concaved ground plane and inserted U-shaped thin slot into planar radiator are used respectively. A manufactured antenna satisfied VSWR<2 for the frequency band of $2.95\~11.7\GHz$ except the limited band of $4.92\~5.866\;GHz$.

The Analysis of Dual Resonant Iris for Designing Waveguide Band-Pass Filter (대역 통과 도파관 여파기 설계를 위한 이중 공진 아이리스 해석)

  • Choi, Jin-Young;Kim, Byung-Mun;Cho, Young-Ki
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.9
    • /
    • pp.904-911
    • /
    • 2011
  • This paper deals with transmission characteristics of a new dual resonant structure for designing waveguide band-pass filter. The structure which has a pass-band between two adjacent stop-bands in a single body consists of circular ridged aperture and four armed conducting patch. The dual resonant behavior of the structure can be represented by a combination of LC series and parallel resonant circuits. Also these resonant properties can be easily controlled by varying the geometry of the aperture and four armed conducting patch. Actually, the structure is fabricated on the microstrip substrate by use of etching technique so that it is formed an iris type resonator which can be easily put into the transverse plane of the waveguide. We use WR-90 standard waveguide, adapters, and VNA(vector network analyzer) to measure the resonant characteristics of the structure. It is very useful to design and to improve the cutoff skirts characteristics in the waveguide band-pass filter design area.

Design and Fabrication of Wireless LAN for Miniaturized Microstrip Antenna (소형화를 위한 무선랜 대역의 마이크로스트립 안테나 설계 및 제작)

  • Lee Won-Jong;Kim Yong-Kyun;Kang Suk-Youb;Lee Hwa-Choon;Yoon Cheul;Park Hyo-Dal
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.9A
    • /
    • pp.906-912
    • /
    • 2006
  • In this paper, N-shaped slot antenna for $5.15GHz{\sim}5.35GHz$ is designed, fabricated, and measured. The prototype consist of meander corrugated N-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are N-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a four N-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication N-shaped slot antenna is 5.25GHz bandwidth for approximately 300MHz(VSWR<2.0) and the gain is $1.3{\sim}2.64dBi$. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and E-Plane are $80.21^{\circ}\;and\;103.38^{\circ}$, respectively.

CPW-Fed Super-wideband Semicircular-Disc-Shaped Dipole Antenna (CPW-급전 초광대역 반원-디스크-모양 다이폴 안테나)

  • Junho Yeo;Jong-Ig Lee
    • Journal of Advanced Navigation Technology
    • /
    • v.28 no.3
    • /
    • pp.356-361
    • /
    • 2024
  • This paper deals with the design and fabrication of a coplanar waveguide (CPW)-fed super-wideband semicircular-disk-shaped dipole antenna operating in a frequency band of 2.4 GHz or higher. To feed the antenna, a CPW feed line was appended to the center of the lower arm of the semicircular-disk-shaped dipole antenna. For miniaturization, square patches were added to the ends of the two arms of the semicircular-disk-shaped dipole, whereas the slot width of the CPW feed line at the center of the dipole antenna was increased to improve impedance matching in the 5.4-6.3 GHz band. The simulated frequency band of the proposed antenna for a voltage standing wave ratio (VSWR) less than 2 was 2.369-30 GHz(170.7%), whereas the fabricated antenna was maintained VSWR less than 2 in the frequency range of 2.378-20 GHz when measured using a network analyzer operating up to 20 GHz so it can be applied as a super-wideband antenna for next-generation mobile communications.