• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.54-62
• /
• 2011

This study was undertaken to investigate the effects of bone waste on the conservation of nitrogen in aerobic composting process by inducing the struvite crystallization, which was known as a powerful method for conservation of nitrogen in composting reaction. Bone waste was dried at oven and crushed to less than 3 mm prior to use. It was found phosphorus content in bone waste was about 20.9% of the fixed solids from the leaching experiments using sulfuric acid. Addition of seed compost affected the progress of composting reaction substantially. In case seed compost was not used, the duration of initial low pH was greater than seed compost was added. This prolonged acidic pH may have a beneficial effect on the leaching of P from the bone waste and struvite crystallization. The struvite crystallization and resulting conservation of nitrogen by addition of bone waste was confirmed by both reduction in ammonia loss and increased ammonia content in compost. However the level of struvite crystallization observed with bone waste addition may be less than the cases water-soluble phosphate salts were used.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.537-538
• /
• 2005

• Resources Recycling
• /
• v.19 no.2
• /
• pp.28-34
• /
• 2010

In this study, cow tibial from cow bone, a kind of beef waste, sintered at $800\sim850^{\circ}C$ for three hours was used to measure its removal capacity for metal ions such as Pb, Cd and Zn in a single and a multi-component equilibrium systems. The sorption equilibrium data were analyzed as measured by the effect of media on lead, cadmium and zinc sorption. This analysis shows that the sorption of metal ions for multi-component systems applying IAST can be predicted more reasonably by the Freundlich and the Sips theory than the Langmuir.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.15-19
• /
• 2006

The meat consumption produces a lot of bone waste everyday. Dumping bone waste without treatment results into environmental hazards. Conventional treatment by pyrolysis is slow, inefficient and produces hazardous by-products. In the work, an investigation of bone waste incinerated using thermal plasma technology is presented. A high temperature arc plasma torch operated at 33 kW was employed for the experiments. Bone waste was incinerated to remove the infectious organic matter and to vitrify the inorganic matter using plasma torch. Bone waste was reduced its 2/3 weight after the treatment. The process was highly efficient, economical, convenient, and fuel free. This method could be used as an alternative method for disposal of bone waste, small infectious animals, hazardous hospital waste, etc.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.71-76
• /
• 2011

In this study, a heavy metal stabilization treatment using waste resource stabilizing agents was utilized on army firing range soil contaminated with Pb and Cu. Both calcined oyster shells (COS; 5% w/w) and waste cow bone (WCB; 3% w/w) were applied for a wet-curing duration of 28 days. Following the stabilization treatment, the process efficiency was evaluated by various extraction methods for Pb and Cu. Neutral and weak acid extraction methods, such as water soluble extraction and SPLP, did not show positive results for heavy metal stabilization with very low leachability. On the other hand, TCLP and 0.1 N HCl extraction showed that the stabilizing agents significantly reduced the amount of the heavy metals leached from the soil, which strongly supports that the treatment efficiency is positively evaluated in acidic leaching conditions. Specifically, in the 0.1 N HCl extraction, the reduction efficiencies of Pb and Cu leaching were 99.9% and 83.9%, respectively. From the sequential extraction results, a difference between Pb and Cu stabilization was observed, which supports that Pb stabilization is more effective due to the formation of insoluble Pb complexes. This study demonstrates that the application of waste resources for the stabilization of heavy metals is feasible.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.528-537
• /
• 2015

To reuse the waste bone from restaurants or butcher houses, the possibility of using waste bone powder after cooking as a filler for wood adhesives used in manufacturing plywood was investigated. Radiata pine (Pinus radiata D. Don) plywoods were manufactured by using commonly used wood adhesives such as urea-melamine formaldehyde (UMF) resin, urea-formaldehyde (UF) resin, and phenol-formaldehyde (PF) resin and the prepared fillers from cattle bone powder, pig bone powder, and seashell powder. Plywood fabricated by using cattle bone powder, pig bone powder, and seashell powder showed weaker performance in dry and wet glue-joint shear strength and wood failure than those of the plywood with wheat flour. The result showed that it was hard to use only bone powder for the replacement of wheat flour. However, the filler mixed with wheat flour and bone powders showed equivalent dry bonding strength and better water resistance than the wheat flour, indicating that bone powders mixed with wheat flour might be used for the manufacture of plywood. When bone powders were mixed with wheat flour as adhesive fillers the shell powder showed the lowest bonding properties and there was no big difference between the cattle bone powder and the pig bone powder.