• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.307-319
• /
• 1988

In order to determine the contents of lead, cadmium and zinc, the tissues of the crussian carp, Carassius carassius, collected from the middle streams of the Nakdong river were examined. During the dry season from 8 to 15, March, 1987, six loci were selected to sample the fish and river water; five of them were the midstreams of the Nakdong river i. e., the vicinities of the Andong dam, the Nakdong bridge, the Waegwan bridge, Gangjung and Gaepori, the other one was the Kumho river around the Paldal bridge(see Fig. 1). The microanalyses of lead and cadmium contents were undertaken by the atomic absorption spectrophotometer(Model IL-551) connected with CTF-IL 655, while that of Zinc by the flame method with IL551 only. The contents of lead and cadmium in water sampled from Gaepori distant from about 30km downward from the junction with the Kumho river were about 1.5 times higher than those from Gangjung distant about 0.5km upward from the junction, and the content of zinc from Gaepori was slightly higher than that from Gangjung. However, the contents of lead and cadmium in water sampled from Gaepori were three fifth of those from the vicinity of Paldal bridge far about 2km upperward from the junction. In the other words, the contents of lead and cadmium in the samples from the vicinity of the Paldal bridge were about 2.5 to 3 times higher than those from the Gangjung and 5 times higher than those from the Andong dam. The contents of the heavy metals in the tissues of Carassius carassius were relatively consistent to those of the aquatic environments where the fish were collected, with higher contents in the tissues of the crussian carp collected from the vicinity of Gaepori and the Paldal bridge which were so much polluted than in those from other loci in upper stream from the junction. And the contents of lead and cadmium in tissues were positively correlated with the age of the fish, however, that of zinc was not. The contents of lead in bone of crussian carp from the vicinity of the Paldal bridge in the group of 0-1 year old fish were similar to those of 4-5 years old fish from Gaepori, and higher than those of 3-4 years old fish collected from the upper stream of the junction. It is likely that fishing from Gaepori and the paldal bridge is not recommended, and all the industrial producers have to pay intensive attention to the water pollution due to the sewage disposal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.418-424
• /
• 2017

Magnesium has a higher specific strength than other metals and is widely used industry wide due to its excellent vibration absorption ability and electromagnetic wave shielding property.For example, it is used for automobile parts such as car seat frames and cylinder heads, and is widely used in electronic products such as notebook cases and mobile phone cases. In addition, it is in the spotlight as a bone-implant material used to assist in the treatment of damaged bones when the bones are cracked or broken. Currently, Ti alloy, stainless steel and Co-Cr-Mo alloy are used as the implant material, and the Mg alloy remains in research stage. The current problem with bone implant implants is that the patients must undergo reoperation to remove the implants after joint surgery. Magnesium, however, can achieve sufficient strength compared to current materials. In addition, since it is self-decomposed after the recovery, reoperation is not necessary. In this paper, Mg alloys were designed by adding harmless Ca and Zn to the human body. In order to improve the strength and corrosion resistance, the final alloy was designed by adding a small amount of Sr as a grain refiner. The radioactive elements of Sr are harmful to the human body, but other naturally occurring Sr elements are harmless. Microstructure analysis of the alloys was performed by optical microscopy and scanning electron microscopy. The mechanical properties and corrosion characteristics were evaluated by tensile test, potentiodynamic test and immersion test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.169-178
• /
• 1998

The crystal phases precipitated in various compositions glass of CaO-$SiO_2-P_2O_5$ system, were identified by XRD. E composition (CaO 49.4, $SiO_2\;36.8,\;P_2O_5$ 8.8 wt%) glass in which both apatite(($Ca_{10}(PO_4)_6O$ and $\beta$-wollastonite($CaSiO_3$) crystals would precipitate by heating, was selected as an experimental composition to prepare the glass ceramics with high bending strength and good bioactivity to the living bone. Glass powders of E composition were unidirectionally crystallized at $1050^{\circ}$C in the temperature-gadient furnace and the resultant glass ceramics were characterized. Bending strength of the glass ceramics was also measured. To investigate the bond forming ability between the glass ceramics and living bone tissue, soaking test of glass ceramics in simulated body fluid was carried out. Densed glass ceramics composed of apatite and $\beta$-wollastonite crystal were prepared by unidirectional crystallization under the optimum conditions. (2 0 2) plane of $\beta$-wollastonite crystals tended to grow perpendicularly to the crystallization direction. Average bending strength of this glass ceramics was 186.9 MPa, higher than that of the glass ceramics prepared by isothermal (not directional) crystallization In soaking test, a thin layer of apatite crystallite was formed on surface of the glass ceramics in 3 days. Apatite crystals formed on the glass ceramics could be act a role to make the chemical bond between the glass ceramics and living bone tissue.

• Korean Journal of Poultry Science
• /
• v.25 no.4
• /
• pp.195-202
• /
• 1998

The present study was conducted to investigate the effects of dietary supplemental dry powder of Rehmannia radix (RR) root on the growth performance and physiological status of broiler chicks. The treatments consisted of corn-soybean meal control diet, and RR 0.5, 1, and 2％ diets. A total of 160 Arbor Acre male broiler chicks were randomly allotted to 16 pens ; four pens per treatment and 10 birds per pen. The growth performance, feed intake and carcass weight did not show any differences among the treatment groups, but feed conversion was significantly lower (P< 0.05) in RR 1％ group than that of the control group. The muscle color was lighter (P < 0.05) in RR lof group than those of the other treatment groups. The blood concentrations of protein, glutamic-oxaloacetic-transaminase (GOT) and glutamic- pyruvic-transaminase (GPT) were not different (P > 0.05) among the treatment groups, but the blood total cholesterol content was significantly decreased (P < 0.05) in RR 2％ group than those the other treatment groups. The blood concentration of sugar was lower (P <0.05) in RR 2％ group than those of the other treatment groups, and hemoglobin concentration was decreased (P <0.05) by addition RR. Crude fat content of thigh muscle was higher in RR 1％ group than those of the other treatment groups, and bone hardness of broiler chicks fed RR was higher (P < 0.05) than that of the control group. The saturated fatty acid content of the thigh muscle tende to be high in control and RR 0.5％ groups, and unsaturated fatty acid content tende to be high in RR 1 and 2％ groups than those of the other treatment groups

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2015

Purpose Whole body bone scan, which makes up a largest percentage of nuclear medicine tests, has high sensitivity and resolution about bone lesion like osteomyelitis, fracture and the early detection of primary cancer. However, any standard for valuation has not yet been created except minimum factor. Therefore, in this study, we will analysis the method which show a quantitative evaluation index in whole body bone scan. Materials and Methods This study is conducted among 30 call patients, who visited the hospital from April to September 2014 with no special point of view about bone lesion, using GE INFINIA equipment. Enumerated data is measured mainly with patient's whole body count and lumbar vertabrae, and the things which include CNR (Contrast to Noise ratio), SNR (Signal to Noise ratio) are calculated according to the mean value signal and standard deviation of each lumbar vertabrae. In addition, the numerical value with the abdominal thickness is compared to each value by the change of scan speed and tissue equivalent material throughout the phantom examination, and compared with 1hours deleyed value. Completely, on the scale of ten, 2 reading doctors and 5 skilled radiologists with 5-years experience analysis the correlation between visual analysis with blind test and quantitative calculation. Results The whole body count and interest region count of patients have no significant correlation with visual analysis value throughout the blind test(P<0.05). There is definite correlation among CNR and SNR. In phantom examination, Value of the change was caused by the thickness of the abdomen and the scan speed. And The poor value of the image in the subject as a delay test patient could be confirmed that the increase tendency. Conclusion Now, a standard for valuation has not been created in whole body bone scan except minimum factor. In this study, we can verify the significant correlation with blind test using CNR and SNR and also assure that the scan speed is a important factor to influence the imagine quality from the value. It is possible to be some limit depending on the physiology function and fluid intake of patient even if we progress the evaluation in same condition include same injection amount, same scan speed and so on. However, that we prove the significant evaluation index by presenting quantitative calculation objectively could be considered academic value.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.19.2-19.2
• /
• 2009

금속을 용해 응고시킬 때 생성되는 소위, 주조 결함이나 소결금속 내의 기공은 재료의 성능이나강도를 현저하게 낮추는 결함으로서 예전부터 기피되어 왔다. 또한, 재료공정에있어서도 여하의 기공이나 기포가 없는 치밀한 고강도 및 고기능성 재료를 개발하는 것에 최대한의 주의와 관심을 기울여 왔다. 그렇지만, 우리가 자연계의 천연물이나 인공물을 둘러보면 그 대부분이다공질임을 쉽게 눈치챌 수 있다. 예를 들어 목재, 지엽등의 생물을 시작해서 콘크리트 등의 인공물, 우리 체내의 뼈도 전형적인 다공질구조로 구성되어 있다. 이러한 구조로부터 재료의 재질제어 이외에 구조제어라는 새로운 어프로치를 고려할 수 있고, 최근 들어, 금속재료에 있어서도 이러한 다공질구조에 관한 연구가활성화되어 충격흡수재, 생체재료, 베어링재료 등의 다양한응용이 전개되고 있다. 특히, 원주상의 방향성 기공을 갖는 로터스금속은 기존의 복잡한구조의 다공질금속보다 뛰어난 기계적 성질을 갖는다. 이러한 다공질금속은 일방향응고할 때 생성하는 과포화가스원자를 석출시켜 기공을 일방향으로 성장시킨다. 즉, 융점에서의 고상과 액상의 가스 용해도 차를 이용하는 것으로서 응고시에 고용할 수 없는 가스원자가 기공을 형성한다. 이와같이 제조한 방향성 다공질금속은 BT (인플란트, 생체적합성, 저탄성, 경량), ST (초음속기엔진부품, 경량), IT (고성능수냉모듈), ET(고온촉매, 필터)의 분야로의 응용이 기대된다. 본 강연에서는 방향성 다공질금속의 제조법, 특성 및 응용을 포함하여그 동안의 연구성과 및 앞으로의 과제 등을 소개하고자 한다.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.135-139
• /
• 2006

To evaluate the dental restorative application of polymer composites filled with hydroxyapatite (HAP) which is an inorganic component of human bone material, dental properties of the polymer composites were investigated. A visible light system was utilized to activate the acrylate resin matrix of the composites. Maximum loading percentage of HAP in composite was 65 wt% and the depth of cure was 6.0 mm which can be applicable for dental restoration. With increasing the HAP content, degree of conversion of polymer composites was slightly decreased, however, polymerization shrinkage value was not varied. Diametral tensile strength value was enhanced with an increase of HAP content, however, there was no strict trend between flexural strength and HAP concentration. Anyhow, polymer composites prepared herein have superior mechanical properties sufficient specifications applicable to dental materials.

• Journal of KIISE:Software and Applications
• /
• v.36 no.8
• /
• pp.623-632
• /
• 2009

In this paper, we propose a pulmonary nodule registration for the tracking of lung nodules in sequential CT scans. Our method consists of following five steps. First, a translational mismatch is corrected by aligning the center of optimal bounding volumes including each segmented lung. Second, coronal maximum intensity projection(MIP) images including a rib structure which has the highest intensity region in baseline and follow-up CT series are generated. Third, rigid transformations are optimized by normalized average density differences between coronal MIP images. Forth, corresponding nodule candidates are defined by Euclidean distance measure after rigid registration. Finally, template matching is performed between the nodule template in baseline CT image and the search volume in follow-up CT image for the nodule matching. To evaluate the result of our method, we performed the visual inspection, accuracy and processing time. The experimental results show that nodules in serial CT scans can be rapidly and correctly registered by coronal MIP-based rigid registration and local template matching.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.57.1-57.1
• /
• 2012

금속을 용해 응고시킬 때 생성되는 소위, 주조 결함이나 소결금속 내의 기공은 재료의 성능이나 강도를 현저하게 낮추는 결함으로서 예전부터 기피되어 왔다. 또한, 재료공정에 있어서도 여하의 기공이나 기포가 없는 치밀한 고강도 및 고기능성 재료를 개발하는 것에 최대한의 주의와 관심을 기울여 왔다. 반면에 자연계의 천연물이나 인공물을 둘러보면 그 대부분이 다공질임을 쉽게 눈치챌 수 있다. 예를 들어 목재, 지엽 등의 생물을 시작해서 콘크리트 등의 인공물, 우리 체내의 뼈도 전형적인 다공질구조로 구성되어 있다. 이러한 구조로부터 재료의 재질제어 이외에 구조제어라는 새로운 어프로치를 고려할 수 있고, 최근 들어, 금속재료에 있어서도 이러한 다공질 구조에 관한 연구가 활성화되어 충격흡수재, 생체재료, 베어링재료 등의 다양한 응용이 전개되고 있다. 원주상의 방향성 기공을 갖는 로터스 금속의 제조 원리는 용융금속의 높은 가스용해도와 고체금속의 낮은 가스고용도의 차이를 이용하여 응고할 때 고용되지 않는 가스원자가 기포를 형성시키는 것이다. 수소용해도는 모든 금속에 있어서 온도상승에 따라 증가하지만 융점에 있어서 용해도의 불연속적 증가를 나타내며 응고할 때 고액계면에서 다량의 가스를 방출하고 기공 생성을 야기한다. 특히, 고 액상에 있어서 수소용해도 차가 큰 마그네슘, 니켈, 철, 동 등은 기포를 생성하기 쉽다. 또한 기공의 배열구조를 제어하기 위해 일방향응고법를 이용하여 기공에 방향성을 부여한다. 외관상 기공구조가 연근뿌리를 닮은 것으로 부터 로터스 금속이라는 명칭이 널리 알려져 있다. 이와 같은 제조방법에 의해 로터스 금속은 기공 방향, 기공크기, 기공률을 자유롭게 제어할 수 있고 우수한 기계적 성질이 기존의 발포금속, 소결금속과 전혀 다른 특성을 가지고 있다. 이러한 기공구조는 용해온도, 응고속도, 분위기 가스압, 불활성가스와의 혼합체적비 등의 제어를 통해서 조절할 수 있다. 이와 같이 제조한 방향성 다공질금속은 BT (인플란트, 생체적합성, 저탄성, 경량), ST (초음속기엔진부품, 경량), IT (고성능수냉모듈), ET(고온촉매, 필터)의 분야로의 응용을 기대한다.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.394-399
• /
• 1999

As the prosthetic application of natural mineral substituted for chemical reagent, composites and a glass-ceramics containing hydro-xyapatite isolated from tuna bone were prepared by solid state reaction. On x-ray examinations, the major phases of composites were identified as pseudowollastonite(${\alpha}-CaSiO_3$) and ${\beta}$-tricalcium phosphate($\beta$-TCP) and the phase of a glass-ceramics was observed as $\beta$-TCP and fluoroapatite caused by $CaF_2$ respectively. SEM images depict that the microstructures of grain at the composites were a function of temperature. The measured strength of a glass-ceramics prepared at $900^{\circ}C$ for 4 hr in air was 90 MPa as a 4-point bending method and this value was similar to the cortical bone, as 50~150 MPa but it was lower than its maximum strength.