• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.519-527
• /
• 2014

Adaptive arrays can minimize contributions from interferences incident onto an sensor array while preserving a signal the direction vector of which corresponds to the array steering vector to within a scalar factor. If there exist errors in the steering vector, severe performance degradation can be caused since the desired signal is misunderstood as an interference by the array. This paper presents an adaptive beamforming method which is robust against steering vector errors, exploiting a range of the desired signal direction. In the presented method, an correlation matrix of array response vectors is obtained through integration over the direction range and a minimization problem is formulated using some eigenvectors of the correlation matrix such that a more accurate steering vector than initially given one can be found. The minimization problem is transformed into a relaxed SDP (semidefinite program) problem, which can be effectively solved since it is a sort of convex optimization. Simulation results show that the proposed method outperforms existing ones such as ORM (outside-range-based method) and USM (uncertainty-based method).

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.13-17
• /
• 2017

This paper presents an approach to enable a typical GPS receiver to be much less susceptible to intentional disruption such as jamming and change in link environment. In order for the GPS receiver to cope with jamming and to get adaptivity, a $4{\times}4$ beamforming antenna is designed using metamaterials. The design results show the antenna gain much higher than 5 dBi and the movable beam.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.65-71
• /
• 2023

In this paper, the design, fabrication and verification steps of an electronically scanned array antenna(AESA) for a photonics-based Ku-band FMCW radar system is described. The presented system consists of a transmitter and a receiver respectively, which has a same antenna in the transceiver. The designed antenna has 2×8 array configuration and operates at Ku-band. The VSWR(Voltage Standing Wave Ratio) of each 16-radiators and the coupling power between radiators is measured. Also, in order to minimize the radar system damage because of handover power from the transmitter antenna to the receiver antenna when the transmitter works, the isolation between the transmitter antenna and the receiver antenna is optimized by test. As a result, beamwidth, side lobe level and beam steering characteristic are obtained by synthesizing each radiator pattern measurement data after each beam pattern of 16-radiators is measured in the near-field chamber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.500-506
• /
• 2002

This paper presents a design of wide angle steering microstrip Rotman lens operating over broadband frequency range for Electronic Warfare equipments. It has a compact and simple structure which it is easy to manufacture repetitively. The lens is modelled as a 2-dimension planar circuit, the contour integral method is performed over entire lens contour and the transmission coefficients from 8 beam ports to 8 array ports are found. The measured results are well agreed with those of analysis. Prediction of the multibeam array pattern fed by linear array antenna shows $\pm$65$^{\circ}$ of beam steering and $\pm$5 dB insertion loss deviation over 3:1 frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.922-929
• /
• 2007

In this paper, a rectangular loop array antenna for beam scanning is designed. A program using RWG MoM(Rao Wilton Glisson Method of Moment) is developed for SEP(Scan Element Pattern) theoretically. Simulation results obtained by using a commercial software tool, MWS are compared with the MoM results to confirm the validity of the program. Also these results are compared with the measured ones for the case of an $8{\times}5$ subarray. The fabricated $8{\times}5$ subarray showed a flat gain characteristic in the elevation scan range of ${\pm}45^{\circ}$ in the E-plane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.740-747
• /
• 2012

An Active Electronically Scanned Array(AESA) radar required necessarily as the Fire Control Radar(FCR) of recent fighters has ununiform detection range with regard to scan angle due to scan loss. Although the compensation method of scan loss in an AESA radar with variable dwell time is investigated, the effectiveness of the method in a fighter FCR with multi-function such as search, track, and missile guidance within limited resources should be considered systematically. In this paper, uniform search performance of an AESA radar using variable dwell time with regard to scan angle is derived. We assumed the search load of 50 % for case without changing dwell time in fixed frame time and showed the fighter FCR requirement for multi-function is not satisfied because the search load for the uniform search performance should be increased by about 100 %. On the other hand, in case of increasing the frame time for the uniform search performance and search load of 50 %, degradation of the search performance is shown by 86.7 % compared with the former. Based on these analyses, the effective beam operation strategy on an airborne AESA radar with uniform search performance in whole scan area is described with consideration of frame time, search load and performance as a whole.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.876-884
• /
• 2015

In this paper, a switched beamforming antenna system at 28 GHz frequency band is described for $5^{th}$ generation wireless communication. The butler matrix is used as a beamforming system and it produces linear spaced phase difference at four output ports. Array antenna is designed that can be steered in desired 4 different directions 28 GHz frequency band. Operation of designed butler matrix that composed of couplers and feedline is explained. The antenna system is designed in RO3003 substrate that has a height of 5 mil and dielectric constant of 3. The size of butler matrix is $20.3{\times}13.0mm^2$ and size of array antenna is $21.2{\times}19.9mm^2$. This system can be steered from $-34^{\circ}$ to $33^{\circ}$ and minimum sidelobe level is 12.9 dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.311-317
• /
• 2019

We first numerically analyzed the characteristics of a silicon-based grating structure for beam steering. The analysis includes the basic principle of the grating structure according to the wavelength, peak radiation angle, radiation efficiency, and full-width at the half maximum(FWHM) of the radiation angle. Based on the analysis, we propose a silicon-based grating structure integrated with distributed Bragg reflector(DBR) to obtain a high radiation efficiency and narrow beam width simultaneously. We performed the numerical optimization of the radiation efficiency and FWHM of the radiation angle according to the DBR position. By the design optimization using the proposed grating structure compatible with the complementary metal-oxide semiconductor(CMOS) process, we achieved a maximum radiation efficiency of 87.1% and minimum FWHM of radiation angle of $4.68^{\circ}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4773-4779
• /
• 2012

In this paper we propose two types of reconfigurable 3-D beam steering antenna for intelligent or smart antenna system. Proposed antennas are composed of triangular(structure1.) or circuler(structure2.) loop structure and bended dipole antenna structure. This antenna can steer beam pattern of 6 direction at xy-plane state (0, 1, 2) and xz-plane state (3, 4, 5) by 4 switch motion with one antenna element. Antenna structure1. is symmetric equilibrium structures based on feeding point. There is no grounding point. As a result, designed antenna's gain is similar to dipole antenna. Also, As unbalanced structure by using CPWG in the form of a semicircular, structure2. is enhanced directivity. The operation frequency of antenna are 2.5 GHz(Structure1.) and 2.55 GHz(Structure2.), maximum gain is 1.04 ~ 2.06 dBi(Structure1. : Omni-directional beam), 1.6 ~ 4 dBi(structure2. : Directional beam). The overall HPBW is about over $160^{\circ}$ in the both of the xy-plane and xz-plane at structure1. and over $125^{\circ}$ at structure2.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.626-631
• /
• 2020

In this paper, a study on beam synthesis technique of conformal array was performed. It is applied to various radar systems that can perform beam steering without deterioration of performance due to beam steering in a general linear arrangement. Unlike the beam synthesis technique in the planar linear array, the conformal array has a radiation element located on a curved surface, so it is necessary to compensate for a difference in length from the radaation element to the wave front surface. In addition, by calculating the offset angle for each radiation element and applying it during actual synthesis, it was possible to predict an accurate beam pattern. In this paper, length compensation and offset angle were calculated and applied to beam pattern synthesis to perform beam pattern comparison, and performance was compared through mathematical analysis.