• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.587-596
• /
• 2011

Ultra rapid-hardening cement is widely used for latex-modified mortar and concrete as repair and finishing material during urgent work. The purpose of this study is to evaluate the improvements in strength made to SBR cement mortars by the adding of various admixtures and by the use of different curing methods. SBR cement mortar was prepared with various polymer-cement ratios, curing conditions and admixture contents, and tested for flow, flexural and compressive strengths. From the test results, it was determined that the flow of SBR cement mortar increased with an increase in the polymer-cement ratio, and the water reducing ratio also increased. The strength of cement mortar is improved by using SBR emulsion, and is strengthened by adding metakaoline. The strength of SBR cement mortar cured in standard conditions was increased with an increase in the polymer-cement ratio, and attained the maximum strengths at polymer-cement ratios of 15 % and 10 %, respectively. The maximum strengths of SBR cement mortar are about 1.8 and 1.3 times the strengths of plain mortar, respectively. In this study, it is confirmed that the polymer-cement ratio and curing method are important factors for improving the strengths of rapid-hardening SBR cement mortar.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.109-120
• /
• 2011

This paper presents an experimental study results on the crack control of flexure-dominant reinforced concrete beams repaired with strain-hardening cement composite (SHCC). Five RC beams were fabricated and tested until failure. One unrepaired RC beam was a control specimen (CBN) and remaining four speciemens were repaired with SHCC materials. The test parameters included two types of SHCC matrix ductility and two types of repair method (patching and layering). Test results demonstrated that RC beams repaired with SHCC showed no concrete crushing or spalling until final failure, but numerous hair cracks were observed. The control specimen CBN failed due to crushing. It is important to note that SHCC matrix can improve crack-damage mitigation and flexural behavior of RC beams such as flexural strength, post peak ductility, and energy dissipation capacity. In the perspective of crack width, crack widths in RC beams repaired with SHCC had far smaller crack width than the control specimen CBN under the same deflection. Especially, the specimens repaired with SHCC of PVA0.75%+PE0.75% showed a high durability and ductility. The crack width indicates the residual capacity of the beam since SHCC matrix can delay residual capacity degradation of the RC beams.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.861-872
• /
• 2006

The element free Galerkin method is extended by the local partition of unity method to model the cohesive cracks in two dimensional continuum. The shape function of a particle whose domain of influence is completely cut by a crack is enriched by the step enrichment function. If the domain of influence contains a crack tip inside, it is enriched by a branch enrichment function which does not have the LEFM stress singularity. The discrete equations are obtained directly from the standard Galerkin method since the enrichment is only for the displacement field, which satisfies the local partition of unity. Because only particles whose domains of influence are influenced by a crack are enriched, the system matrix is still sparse so that the increase of the computational cost is minimized. The condition for crack growth in dynamic problems is obtained from the material instability; when the acoustic tensor loses the positive definiteness, a cohesive crack is inserted to the point so as to change the continuum to a discontiuum. The crack speed is naturally obtained from the criterion. It is found that this method is more accurate and converges faster than the classical meshless methods which are based on the visibility concept. In this paper, several well-known static and dynamic problems were solved to verify the method.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.1
• /
• pp.42-48
• /
• 2007

Purpose: The purpose of this study is to image metastaic lung melanoma model with optimal pre-conditions for animal handling by using $[^{18}F]FDG$ small animal PET and clinical CT. Materials and Methods: The pre-conditions for lung region tumor imaging were 16-22 h fasting and warming temperature at $30^{\circ}C$. Small animal PET image was obtained at 60 min postinjection of 7.4 MBq $[^{18}F]FDG$ and compared pattern of $[^{18}F]FDG$ uptake and glucose standard uptake value (SUVG) of lung region between Ketamine/Xylazine (Ke/Xy) and Isoflurane (Iso) anesthetized group in normal mice. Metastasis tumor mouse model to lung was established by intravenous injection of B16-F10 cells in C57BL/6 mice. In lung metastasis tumor model, $[^{18}F]FDG$ image was obtained and fused with anatomical clinical CT image. Results: Average blood glucose concentration in normal mice were $128.0{\pm}23.87$ and $86.0{\pm}21.65\;mg/dL$ in Ke/Xy group and Iso group, respectively. Ke/Xy group showed 1.5 fold higher blood glucose concentration than Iso group. Lung to Background ratio (L/B) in SUVG image was $8.6{\pm}0.48$ and $12.1{\pm}0.63$ in Ke/Xy group and Iso group, respectively. In tumor detection in lung region, $[^{18}F]FDG$ image of Iso group was better than that of Ke/Xy group, because of high L/B ratio. Metastatic tumor location in $[^{18}F]FDG$ small animal PET image was confirmed by fusion image using clinical CT. Conclusion: Tumor imaging in small animal lung region with $[^{18}F]FDG$ small animal PET should be considered pre-conditions which fasting, warming and an anesthesia during $[^{18}F]FDG$ uptake. Fused imaging with small animal PET and CT image could be useful for the detection of metastatic tumor in lung region.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1097-1105
• /
• 2017

This study examined how much chicken meat was in sausage made with pork. Both real-time polymerase chain reaction (PCR) and internal standard addition were used. Fifty ng of chicken DNA was added to the sausages as an internal standard. The addition of standard DNA increased the amplification efficiency of PCR and confirmed the possibility of quantitative analysis. A QIAamp DNA Micro Kit was used to improve the DNA recovery and amplification efficiency. The density of template DNA and primer were suitable for $3.0{\sim}5.0{\mu}L$ and $0.5{\mu}L$, respectively. Each DNA of pig and chicken was diluted in 10-fold from steps 50 ng to 0.05 ng. The detection limit of both pig and chicken meat was more than 0.05 ng and the correlation coefficient of the standard curve was at least 0.98. The result of the quantitative analysis after heat treatment of 3 samples of pigs and chickens mixed at 70:30 showed a 5.7% difference (64.3:35.7) between the expected value and measured value. The quantitative value was changed by affecting the DNA according to the heat treatment ($70^{\circ}C$, 10 min). An analysis of the pork and chicken content in sausages showed that it was difficult to detect chicken meat and the quantitative value of DNA according to the Ct value was very low. On the other hand, when adding standard material (50 ng of chicken DNA) to the sausages, the Ct value decreased gradually with increasing chicken mixing ratio. Thus, the mixing ratio of chicken in sausages could be estimated.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.685-693
• /
• 2003

The aim of this study was to develop a standardized recipe for black sesame gruel that has been preferred for generations as a nutritional food. The method focused on optimizing the mixing ratio of the components to improve the quality of the black sesame gruels that modem consumers would like. The results are summarized as follows: The more black sesame added to the gruel, the lower its brightness was, but the redness and yellowness was higher. The amount of black sesame made a significant difference in the viscosity, color, nutty taste, bitterness, appearance and overall preference. It was highest in the overall preference when the amount of black sesame was added 33g(40％ of rice weight basis). Different types of rice were added to the black sesame gruel, and it was observed that the color value of the gruel was high in its brightness, redness and yellowness when 50g(60％) of glutinous rice was added to it. The black sesame gruel was most preferred when 50g of non-glutinous rice was added. The redness value was high when 15g(18％) of non-glutinous rice flour was added. The yellowness value was high when 25g(30％) of non-glutinous rice flour was added. This observation showed significant differences in the viscosity, color, nutty taste, bitterness, appearance and overall preference. In particular, the black sesame gruel was most preferred when 50g of non-glutinous rice flour was added. The addition of 7g(9％) of salt to the black sesame gruel showed the highest brightness. The redness and yellowness was the highest when 5g(6％) of salt was added. This observation showed a significant difference in the viscosity, color, nutty taste, bitterness, appearance and overall preference. The highest preference was observed when 2.5g(3％) of salt was added. Adding more materials increased the viscosity of the black sesame gruel. With increasing temperature, the viscosity became lower, and vice versa. The intensity of sweetness and spreadability was found to be proportional to the amount of additive material. In conclusion, the optimum recipe for black sesame gruels was obtained 33g(40％) of black sesame, 50g(60％) of glutinous rice (flour), 2.5g of salt, and 500$m\ell$ of water.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.207-216
• /
• 2021

This study was conducted to determine the nutritional quality of two newly-developed native chicken strains, compared to the commercial Korean native chicken. A total of 600 chickens (CON: Hanhyup No. 3, CL1: candidate line C, CL2: candidate line D) raised under the same conditions were slaughtered at either 5 or 12 weeks. Leg meat was then obtained and analyzed for its physicochemical properties. The results showed that regardless of the growing period, there was no variation in proximate composition (P>0.05), except for crude protein, between strains. Water holding capacity did not differ between strains at either slaughter age; however, it was significantly lower in the 12-week group than in the 5-week group (P≤0.05). For both skin and muscle color, a^* and b^* values were lower at 12 weeks than at 5 weeks (P≤0.05). DPPH radical-scavenging activity tended to be lower at 12 weeks than at 5 weeks (P≤0.05). Furthermore, all chickens slaughtered at 5 weeks were found to have greater contents of linoleic acid (18:2) and polyunsaturated fatty acids (PUFA) and lower atherogenicity and thrombogenicity indices than those slaughtered at 12 weeks (P≤0.05). However, anserine, betaine, and glucose were more concentrated among the lines at 12 weeks than at 5 weeks (P≤0.05). In conclusion, the quality traits of native chickens were distinct by different production stages rather than chicken lines.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.329-344
• /
• 2017

This study was carried out to investigate the hot pepper yield, chemical properties of soil and distribution of animalcule with split irrigation and input of organic matter under no-tillage hot pepper green house condition. After experiment, soil pH maintained range of 5.6~6.2 in whole treatments. Organic matter content of soil was range of $32{\sim}42g{\cdot}kg^{-1}$. Soil salinity (EC) content of soil was range of $1.0{\sim}2.7dS{\cdot}m^{-1}$. Exchangeable cations in soil were range of $0.08{\sim}0.24cmol^+{\cdot}kg^{-1}$ in K, $9.5{\sim}12.8cmol^+{\cdot}kg^{-1}$ in Ca, and $2.7{\sim}3.2cmol^+{\cdot}kg^{-1}$ in Mg. Avaliable phosphorus ($P_2O_4$) content in soil was range of $1,011{\sim}1,137mg{\cdot}kg^{-1}$. Yield of pepper was more decreased in treatment of soybean cake fertilizer than no-treatment of soybean cake fertilizer. Yield of pepper in treatment of soybean cake fertilizer was increased at 33% of standard fertilizer application. Yield of pepper in no-treatment of soybean cake fertilizer was increased at 33% and 66% of standard fertilizer application. Number of fruits was increased range of 12.5~34.9% at half division irrigation compared with whole quantity irrigation. Yield of pepper was increased range of 13.5~34.4% at half division irrigation compared with whole quantity irrigation. Nine index of nature status and 271 Individual were captured in treatment of soybean cake fertilizer. Five index of nature status and 54 Individual were captured in treatment of soybean cake fertilizer. Nature status for environmental change as index organism was 11 points and 5 points, at treatment of soybean cake fertilizer and no-treatment of soybean cake fertilizer, respectively.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.440-447
• /
• 2020

Masonry structures are used as bearing walls in small buildings, but they are generally considered non-bearing walls. They are used as partition walls that divide the interior spaces of the frame structures of buildings. In addition, wetting techniques that use mortar as an adhesive between blocks or bricks in construction are vulnerable to climatic conditions, especially cracks in mortar, which can cause conduction collapse of the walls in seismic loading. The purpose of this research was to propose a dry concrete block construction method that complements the weak axial shear stiffness and improves the weakness of the wet construction method as well as to investigate its structural behavior. In this study, the material properties of concrete blocks were examined, and the seismic performance of the proposed dry assembly structure was verified by structural behavior tests on horizontal cyclic loads. First, in these study results, concrete blocks can be applied to the dry block construction method instead of wet construction methods because they secure more than C-type blocks in KS regulations. Second, the structural performance of the wall against a horizontal cyclic load indicates that the resisting force of the assembly block wall is increased by increasing the horizontal length of the wall, forming several diagonal cracks. Finally, the proposed dry block wall structure requires a seismic performance assessment considering that the ratio of the shape of the wall by height and length is considered a major influence variable on the structural behavior under a horizontal load.