• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.487-497
• /
• 2019

It is very difficult to detect ballistic missiles because of small cross-sections of the radar and the high maneuverability of the missiles. In addition, it is very difficult to recognize and intercept warheads because of the existence of debris and decoy with similar motion parameters in each flight phase. Therefore, feature vectors based on the maneuver, the micro-motion according to flight phase are needed, and the two types of features must be fused for the efficient recognition of ballistic warhead regardless of the flight phase. In this paper, we introduce feature vectors appropriate for each flight phase and an effective method to fuse them at the feature vector-level and classifier-level. According to the classification simulations using the radar signals predicted by the CAD models, the closer the warhead was to the final destination, the more improved was the classification performance. This was achieved by the classifier-level fusion, regardless of the flight phase in a noisy environment.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.559-565
• /
• 2017

A UAV(unmanned aerial vehicle) requires higher reliability for external effects such as electromagnetic interference because a UAV is operated by pre-designed programs that are not under human control. The design of a small UAV with a complete resistance against the external effects, however, is difficult because of its weight and size limitation. In this circumstance, a conventional small UAV dropped to the ground when an external effect caused the rebooting of the flight-control computer(FCC); therefore, this paper presents a novel algorithm for the improvement of the flight safety of a small UAV. The proposed algorithm consists of three steps. The first step comprises the calibration of the navigation equipment and validation of the calibrated data. The second step is the storage of the calibration data from the UAV take-off. The third step is the restoration of the calibration data when the UAV is in flight and FCC has been rebooted. The experiment results show that the flight-control system can be safely operated upon the rebooting of the FCC.

• Journal of Climate Change Research
• /
• v.5 no.1
• /
• pp.61-70
• /
• 2014

The amount of greenhouse gas (GHG) emissions has been increasing steadily over the last 3 years (2009~2011), averaging 5.7 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. The present study attempts to investigate the aviation fuel consumption and GHG emissions of Tier 3a type by the flight phase from three aircraft type such as B737-600(routes between Gimpo-Jeju airport), B737-700(routes between Gimpo-Jeju airport and Inchon-Narita), B737-800(routes between Inchon-Narita) using the Flight Operation Quality Assurance(FOQA) data of the year 2011.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.15-21
• /
• 2021

Electrically powered airplanes can reduce CO₂ emissions from fossil fuel use and reduce airplane costs in the long run through efficient energy use. For this reason, advanced aviation countries such as the United States and the European Union are leading the development of innovative technologies to implement the full-electric airplane in the future. Currently, the research and development to convert existing two-seater engine airplanes to electric-powered airplanes are underway domestically. The airplane converted to electric propulsion is the KLA-100, which aims to carry out a 30-minute flight test with a battery pack installed using the engine mounting space and copilot space. The lithium-ion battery installed on the airplane converted to electric propulsion was designed with a specific power of 150Wh/kg, weight of 200kg, and a C-rate 3~4. This study confirmed the possibility of a 30-minute flight with a designed battery pack before conducting a flight test of a modified electrically propelled airplane. The battery performance was verified by dividing the 30-minute flight profile into start/run stage, take-off stage, climbing stage, cruise stage, descending stage, and landing/run stage. The final target of the 30-minute flight was evaluated by calculating the battery capacity required for each stage. Furthermore, the flight performance of the electrically propelled airplane was determined by calculating the flight availability time and navigation distance according to the flight speed.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.163-165
• /
• 2001

본 연구개발은 입력된 항로를 스스로 비행하며 사진 촬영, 국토 및 환경을 감시ㆍ관리할 수 있는 지능형 무인 비행 시스템 개발을 위한 레저 산업용 무선 조종 모형 비행기에 관련된 핵심기술을 확보하고, 상업화를 위한 전 단계의 시작품을 제작하는 것이다. 이와 관련하여 무선 조종 비행 관련 데이터를 확보 및 습득하고, 이의 활용으로 표준조종 기술을 확립하도록 했다. 또한, 자동 비행모드로 전환하기 위한 자동 비행 제어 알고리즘을 개발했으며, 확보된 비행기술을 데이터화하여 다양한 환경에서 시뮬레이션(simulation)을 수행한 정보를 프로그램화하여 자동 비행을 하도록 하고, 마이크로프로세서(microprocessor)를 이용하여 서보모터를 구동할 수 있는 제어기를 개발하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.2
• /
• pp.23-45
• /
• 1994

본 연구 논문은 항공기 개발에 있어서 비행시험의 최종 단계라 할 수 있는 스핀시험의 정의, 스핀 시험방법 및 스핀 진입시의 회복방법과 실제 비행에서의 스핀 특성으로 스핀에 대한 안전성 제고 및 비행시험의 중요성을 논하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.1
• /
• pp.10-17
• /
• 2000

본 논문은 우주 발사 비행체가 지구 재진입 할 때의 유도제어에 관한 것이다. 우주 발사 비행체의 재진입궤적은 재진입 할 때의 특징에 따라 여러 단계로 나누어진다. 저항가속도는 각 단계에 따라 알맞은 파라메터로 표현되며, 해석적인 저항가속도로 단순화된 궤적으로 표현한다. 본 연구는 현재의 이란적인 궤적방법과 예측방법의 각각의 장점에 의한 혼합유도방법을 표현하였다. 제안된 유도방법을 이용한 우주 발사 비행체의 재진입 모의실험의 결과는 혼합유도방법이 지구대기 재진입 할 때 간단하고 효과적인 유도방법임을 보여주었다.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.48-51
• /
• 1992

항공기 비행품질에 영향을 주는 설계분야는 크게 3가지로 항공기 형상, 조종체계 및 조종실 배치로 분류됩니다. 이들 3가지 설계분야 중에서 조정실의 운용자 인간공학적인 요구 사항을 고려하지 않으면 항공기 운용성 품질중에 3분의 1이 감소될수 있습니다 항공기를 개발할때에 개발자는 그 항공기를 운용하는 운용자의 인체, 생리, 심리, 습관 등을 고려해, 항공기 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실의 인간공학적 최적화 설계 및 배치를 개발초기단계부터 적용해야 합니다. 항공기의 조종실 품질은 조종사가 항공기 비행 임무를 수행할 때에 항공기 비행을 위한 용이한 정보 인식, 용이한 정보 결심 및 용이한 조종의 특성을 조종사에게 제공할 때 항공기 비행 품질이 좋아질 것입니다

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.1
• /
• pp.66-72
• /
• 2007

an approach to air-vehicle design, an application of the radio-controlled model flight test techniques has been presented. The approach presented in this study is to validate the air-vehicle design configuration by analyzing the flight test results of scale model with dynamic similarities, and then to apply the analyzed results to the aerodynamic design process in early stage of the air-vehicle development. To develop practically applicable similarity laws for the subscale flying model design, the air-vehicle motions are decoupled into rotational motions for stability & control similarities and translational motions for flight performance similarities. Also, detail techniques for radio-controlled model flight test have been developed. Based on the results obtained from the radio-controlled flight test, the present approach for air-vehicle design has shown to be useful to validate the air-vehicle design configuration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.268-277
• /
• 2019

Flight test systems should monitor various conditions in real time during flight tests and take safety measures in an emergency. The importance of ensuring test safety increases in more complicated and wider test environments. Also, due to the transition of wartime operational authority, many guided missile systems must be developed simultaneously. Early deployment and budget reduction by shortening the development and T&E periods are also necessary. Consequently, the risk of flight tests under the circumstance of inefficient test resources is increasing. To address this deficiency, a flight test system model using SysML was proposed in this study. The method of designing and verifying the test system is based on the agile shift left testing methodology of advanced T&E labs and utilizing a system reference model in the aerospace field. Through modeling and simulation analysis, early identification and correction of faults resulting from inconsistent test requirements can mitigate the risk of delays during the T&E phase of flight tests. Also, because the flight test system model was constructed using SysML, it can be applied to test various guided missile systems.