• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.1-6
• /
• 2006

This paper predicts the stall characteristics of three-dimensional wings. An iterative decambering approach is introduced into the nonplanar lifting surface method to take into consideration the stall characteristics of wings. An iterative decambering approach uses known airfoil lift curve and moment curve to predict the stall characteristics of wings. The multi-dimensional Newton iteration is used to take into consideration the coupling between the different sections of wings. Present results are compared with experiments and other numerical results. Computed results are in good agreement with other data. This scheme can be used for any wing with the twist or control surface and for wing-wing configurations such as wing-tail configuration or canard-wing configuration.

• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.123-129
• /
• 1997

In order to consider the reduced mass effects on the out-of-plane ring inversion vibration of 1,3-CHD, the vector-based computer program has been written and the kinetic energy expansion function for the large amplitude ring inversion vibration has been calculated using this program. The structural parameters for the calculations have been determined from the ab initio HF/6-31G** calculation. The potential energy function for the out-of-plane ring inversion vibration of 1,3-CHD has been determined from the kinetic energy expansion function and previously reported low-frequency Raman data. The vibrational Hamiltonian calculation including kinetic energy expansion function made it possible to determine the more reliable out-of-plane potential energy function for the ring inversion of 1,3-CHD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.728-733
• /
• 2008

Unsteady aerodynamic analysis of an air-pressure-levitated high-speed ground vehicle moving over the nonplanar ground surface are performed using the boundary-element method. The potential flow solution is included in a time-stepping loop and the wake is captured as part of the solution. When the vehicle moving inside the channel, the lift coefficient and the pitching moment coefficient of the vehicle are increased further because the air trapped by the channel increases the ground effect. In other words, the nonplanar ground surface such as the channel decreases further the longitudinal stability of the vehicle. On the other hand, there is little difference between the ground and the channel in the lateral stability of the vehicle because the lift increment due to the nonplanar ground surface such as the channel takes place on both sides of the wing with the same rate of increase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.12-17
• /
• 2006

Longitudinal static stability and steady aerodynamic characteristics of wings flying over nonplanar ground surfaces (rail and channel) are investigated using the boundary-element method. For a channel with it's fence higher than the wing height, the lift and the nose-down pitching moment increase as the gap between the wingtip and the fence decreases. For a rail with it's width wider than the wing span, the lift and the nose-down pitching moment increase as the rail height decreases. Longitudinal static stability of a single wing flying over nonplanar surfaces is worse than the case of the flat ground. In case of tandem wings, longitudinal static stability of the wings flying over the channel is better than the case of the flat ground. It is believed that the present results can be applied to the conceptual design of high-speed ground transporters.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.85-91
• /
• 2003

Intracavity frequency doubling of a single-mode Nd:YAG laser by using a nonplanar ring cavity is demonstrated. The nonplanar ring cavity consists of a Brewster-angled Nd:YAG crystal placed in a magnetic field, a KTP crystal, and two spherical mirrors. In this design the Nd:YAG block acts as both a nonreciprocal polarization rotator and a partial polarizer, and the nonplanar portion of the ring cavity, which is formed by a relative twist angle between the Brewster-angled end surfaces of the Nd:YAG block, serves as a reciprocal polarization rotator. An eigenpolarization theory for the cavity configuration is presented and suitable values of the relative twist angle for unidirectional operation are estimated. A single-mode output power of 22 ㎽ at 532 nm and an optical to optical conversion efficiency of 1.8% are obtained with a 1.2 W diode laser at 809 nm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1530-1537
• /
• 1991

본 연구에서는 반무한 직선 계면균열의 상하면에 임의로 분포하는 어떠한 하 중에 대해서도 그 해석이 가능한 그린함수(Green's function)를 구하고자 한다. 이 를 위하여 반무한 직선 계면균열상의 임의의 한 점에 평면 집중하중이 작용하는 문제 와 비평면 집중전단하중이 작용하는 문제를 각각 택하였고, 이때 계면균열의 선단은 열려있다고 가정하였다. 이 문제를 풀므로써 균열선단부근의 응력성분을 결정하고 이로부터 그린함수의 의미를 지니는 응력강도계수에 대한 폐형해를 얻었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.40-42
• /
• 2013

본 논문에서는 사각 평면이 아닌 실린더나 구 형태의 비평면 스크린에 고품질 파노라마 영상을 렌더링 하기 위해 스틸 카메라를 이용한 자동 캘리브레이션과 멀티 프로젝터를 이용한 파노라마 렌더링 시스템을 제안한다. 스틸 카메라를 이용한 비평면 스크린 캘리브레이션은 특정 패턴을 스크린에 투사하고 이를 촬영하여 프로젝터의 투사 왜곡을 보정하고 멀티 프로젝터간의 중첩 영역에 대한 보정을 자동 수행한다. 캘리브레이션이 완료된 이후에 멀티 프로젝터를 이용하여 고품질의 파노라마 비디오를 렌더링 하기 위해서 본 논문에서는 복수의 멀티 시스템과 동기화 카드를 이용하여 렌더링 시스템간의 재생 동기화를 수행 하였다. 제안하는 렌더링 시스템을 적용하면 기존의 전문가의 수동작업에 의한 인력 및 보정 시간을 줄일 수 있으며, 시스템 환경이 변하더라도 쉽게 적응적으로 렌더링 환경을 구축하는 것이 가능하고 고품질의 파노라마 비디오를 렌더링 하는 것이 가능하다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.171-178
• /
• 2006

Experimental and theoretical study of the non-planar response motions of a circular cantilever beam subject to base harmonic excitation has been presented in this paper work. Theoretical research is conducted using two non-linear coupled integral-differential equations of motion. These equations contain cubic linearities due do curvature term and inertial term. A combination of the Galerkin procedure and the method of multiple scales are used to construct a first-order uniform expansion for the case of one-to-one resonance. The results show that the non-linear geometric terms are very important for the low-frequency modes of the first and second mode. The non-linear inertia terms are also important for the high-frequency modes. We present the quantitative and qualitative results for non-planar motions of the dynamic behavior.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.62-65
• /
• 2006

In this paper, nonlinear nonplanar vibration of a flexible rectangular cantilever beam is analyzed when one-to-one resonance occurs to the beam. The planar and nonplanar motions of the beam are analyzed in time and frequency domains. In frequency domain, FFT analyzer is used to perform autospectrum and cepstrum analyses for nonlinear response of the beam. In time domain, an oscilloscope is used to investigate the phase difference between the planar and nonplanar motions and to perform Torus analysis in the phase space. Through those analyzing process, the main frequencies of superharmonic, subharmonic, and super-subharmonic motions are investigated in the nonplanar motion due to one-to-one resonance. Analyzing the phase difference between the planar and nonplanar motions, it is observed that the phase difference varies in time.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.137-139
• /
• 2016

본 논문에서는 비평면 디지털 사이니지 서비스를 제공하기 위해서 투사될 다수의 콘텐츠 들을 스크린 환경에 맞춰 동적으로 보정하는 시스템의 설계와 구현을 다룬다. 제안기술은 다양한 형태의 사물 표면을 스크린으로 활용하여 디지털 사이니지 서비스를 쉽게 제공할 수 있도록 하는데 필요한 보정 시스템에 관한 것으로 동적으로 기하학적 구성정보 및 주변 환경 정보를 감지하여 콘텐츠를 적절하게 보정할 수 있으며 향후 디지털 사이니지 서비스뿐만 아니라 공연이나 전시와 같은 다양한 분야에도 활용이 기대된다.