• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3430-3438
• /
• 2011

The purpose of this study is to set the Korean mandarine quality standards based on consumer preference survey. Until now the Korean mandarine's quality standards has been based on the fruit size. The Korean mandarine's quality in agricultural cooperative, citrus agricultural cooperative federation, and some agricultural corporation has been selected in accordance with its own brand of quality grade using a non-destruction sorting machine. But, setting the Korean mandarine's quality standards has been based on the convenient and routine method rather than the scientific and objective method, consumer's preference. According to the grade contents, the highest grade brand was required more than sugar $12^{\circ}Bx$ and less than acid 1.0% and the following grade brand was required more than sugar $11^{\circ}Bx$ and less than acid 1.0% uniformally. Thus, in this study, based on the consumers' preference of Korean mandarine, 4-level grades of sugar and 4-level grades of acidity were divided into the total 16-level grades. Based on them, 5-level grades were set.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.743-750
• /
• 2000

For the ${\gamma}$-ray spectrometry analysis of radium and radon in environmental samples, plastic Marinelli beakers have been usually used. But, there are two problems; one is the increment of background by adsorption of airborne radon daughters on the plastic beaker, and other is the incompleteness of radioactive equilibrium by the loss of gaseous radon produced during the radioactive equilibrium process. In order to solve these problems, we made aluminium counting container, and investigated its characteristics. We investigated radioactive equilibrium process using the aluminium container. We found that both solid and liquid samples reached at radioactive equilibrium state in the aluminium container without loss of gaseous radon. By the use of the aluminium container, we established radon and radium analysis method of solid and liquid samples using gamma-ray spectrometry.

• Food Science and Preservation
• /
• v.7 no.4
• /
• pp.349-356
• /
• 2000

This study is to investigate and to suggest the most efficient roach standardization that is performed and is preferred by consumers to provide benefits for all of them. The data was collected to obtain information about peach standardization consumption and consumer preference, and marketing situation by using interviews from peach producers, wholesaler and retailer, and consumers for three years (1997-1999). The most important standardization criterion at present was found to be a weight among peach producers, a color among wholesaler and retailer and consumers. In addition, sweetness was ranked first among the producers, wholesalers and retailers, and consumer if sweetness were detected without running peaches. Especially, consumers preferred to purchase small amount with small package and presented sweetness as the most preferred criterion. Thus, it is necessary for peach producers, wholesaler and retailers, and consumers to establish the small package standard and to subdivide the present system into several grades for performing the two-way system which labels grade with sweetness and weight.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2996-3005
• /
• 2011

The purpose of this study is to set the Hallabong tangor's quality standards based on consumer preference survey. Until now the Hallabong tangor's quality standards has been based on the fruit size. Hallabong tangor's quality in agricultural cooperative, citrus agricultural cooperative, and some agricultural corporation has been selected in accordance with its own brand of quality grade using a non-destruction sorting machine. But, setting the Hallabong tangor's quality standards has been based on the convenient and routine method rather than the scientific and objective method, consumer's preference. According to the grade contents, more than sugar $13^{\circ}Bx$ and less than acid 1.10% has been used uniformly. Thus, in this study, based on the consumers' preference of Hallabong tangor, 5-level grades of sugar and 7-level grades of acidity were divided into the total 35-level grades. Based on this, 5-level grades were set and were divided into selling product grades(1~3) and non-selling product grades(4~5).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.387-394
• /
• 2009

The objective of this study is to evaluate the durability and deterioration of concrete lining in the seven conventional tunnels. These tunnels were constructed about 40~70 years ago, and closed about 10~40 years ago. The field investigation and various laboratory testings were performed for this study. It was observed from the visual, examinations that the concrete linings of 7 tunnels were severely deteriorated, such as, cracks, leakages, desquamation, and exploitations. The compressive strengths obtained from rebound hardness method and uniaxial compressive strength test on core specimens largely differed depending on the locations in the tunnel. The maximum compressive strength of concrete lining was greater about 2 times than the minimum compressive strength of concrete lining in the same tunnel. The results of micro-structural analysis showed that the substances deteriorating the concrete lining, such as ettringite and thaumasite, were detected in the concrete lining of tunnel.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1240-1244
• /
• 1999

In order to assess the effects on the magnetic properties due to the defect in the material irradiated by fast neutron ranging $10^0-10^{18}n/cm^2$, the magnetic properties such as maximum magnetic induction, coercivity, remanence, Barkhausen Noise Amplitude(BNA), Barkhausen Noise Energy(BNE) and hardness were measured. It is shown that the magnetic properties and hardness do not change by the fast neutron irradiation under $10^{17}n/cm^2$. Therefore, in this experiment, it is understood that the magnetic properties decrease by the increase of hardness. This measurement method can be used to evaluate the neutron irradiation embrittlement nondestructively since the magnetic properties and hardness do change by the neutron irradiation over $10^{17}n/cm^2$ consistently.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.50-58
• /
• 1995

These studies were carried out to develop a system for non -destructive and continuous measurement of fresh weight and to analyse the growth response of leaf lettuce under the different nutrient solution and light condition with this system. The developed measurement system was consisted of four load cells and a microcomputer. The output from the system was highly positive correlation with the plant fresh weight above the surface of the hydroponic solution. The top fresh weight of plant could be measured within the error $\pm$ 1.0g in the range of 0 - 2000g. The top fresh weight of leaf lettuce increased 44 times at 18th day after transferring to the nutrient solution, and the maximum growth rate was observed at 13th day after transferring. The growth rate was 10.7- 29.6% per day during 18 days. Optimum concentration of the nutrient solution for the growth of lettuce was 1.4 - 2.2 mS/cm of EC level. When the light condition was changed from dark to light, the fresh weight was temporarily decreased, but the fresh weight increased under the opposite condition. Top fresh weight of leaf lettuce in the darkness normally increased within 12 hours after darkness treatment, and then slowly increased until 78 hours under continuous dark condition. After that times, the fresh weight began to decrease.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.40-46
• /
• 2003

In this research, we accomplished the interpreting about the vibration of the object, which is the out of plane displacement in the Electronic Speckle Pattern Interferometry(ESPI), one of the optical measuring technique. The vibrating object has a inherent nodal line, therefore we can get the information about the vibration of the object by interpreting it. we used a speaker and a cantilever plate for a measurement object, and interpreted it qualitatively by using the Time-Average ESPI. In this experimental result, the speaker has the lower mode of fringe at 550Hz, 570mV, and the higher mode of fringe at 950Hz, 570mV This ESPI is a non-destructive test, and because of using the laser at measuring, it has a high resolution. The ESPI can test vibration mode regardless of the test object size, because the area which illuminated laser is the test area.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.4
• /
• pp.43-50
• /
• 2004

A large concrete dam, of which construction work had not been continued for more than 20 years because of social problem, was investigated with emphasis on its seismic performance. Mechanical properties of the concrete dam material were estimated by performing uniaxial compression tests for obtained the samples from dam body. Borehole image Processing System (BIPS) was used to investigate the susceptible faults developed in the interface between old an new concretes. Using the results of several laboratory and field tests earthquake response analysis for the dam were done, The results of such investigation show that its physical and mechanical conditions are in a good condition, and the results earthquake response analysis imply that the dam, even it consists of two different concretes, show good seismic performance.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.418-425
• /
• 2009

To get the stable and optimized proton beam in the KIRAMS-13 cyclotron which installed in the regional cyclotron center, it is necessary to measure the transverse profile of proton beam. Beam Induced Fluorescence monitor is one of the non-destructive methods to measure the beam profiles, and it has many advantages such as a simple structure, real-time measurement, and minimum energy loss. The objective of this research is the design and development of Beam Induced Fluorescence monitor to measure the proton beam profiles in the KIRAMS-13 cyclotron.