• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.41-54
• /
• 2024

Regular monitoring plays a crucial role in ensuring the safety of geotechnical structures. Currently, nondestructive methods are employed to monitor such structures to minimize the impact, e.g., sensor-based accelerometers, displacement meters, image-based lasers, and drone imaging. These technologies can observe surface changes; however, they frequently suffer difficulties in terms of identifying changes in internal properties. To monitor changes in internal properties, in situ geotechnical investigations can be employed. A nondestructive test that can be used for this purpose is the spectral analysis of surface wave (SASW) test using geophones. The SASW test is a nondestructive method; however, due to the time required for data interpretation and the difficulty in analyzing the data, it is challenging to use the SASW test for monitoring applications that require frequent observations. However, it is possible to apply the first-step analysis, which yields the dispersion curve, for monitoring rather than the complete SASW analysis, which yields the shear wave velocity. Thus, this paper presents a fundamental study on the phase difference that derives the dispersion curve to utilize the SASW test for monitoring. The reliability of each phase difference interval is examined to determine the boundary to the subjected monitor. The study used phase difference data obtained using a geophone from a single-layered, homogeneous ground site to evaluate reliable boundaries. The findings of this study are expected to improve the utility of monitoring by identifying the ideal boundary for phase difference data.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.65-70
• /
• 2012

Structural changing materials which can induce the physical deformation of materials are interesting research topics with various potential applications. Particularly, light among many driving mechanisms is a non-contact energy source, hence the light-responsive system can be used where non-destructive, local irradiation, and remote control is needed. Here, a mainchain azobenzene polymer is synthesized and its physical and optical properties are observed and compared to that of a polymer having a light-responsive azobenzene moiety on its side chain. Further dispersion onto polyvinylalcohol hydrogel is made and its dual stability and actuation are observed upon UV-visible light irradiation. Extended azobenzene polymer blend films show an anisotropic light-actuation with non-polarized UV light at room temperature. This physical shape change is quite reversible and occurs at lower temperature than that of any other reported systems including liquid crystalline elastomers. It is successfully demonstrated that the simple physical azobenzene/polymer blending has a very good actuation compared to that of LCEs which need an elaborate chemical design and it can be further used in the areas requiring a dimensional shape change.

• Conservation Science in Museum
• /
• v.6
• /
• pp.31-37
• /
• 2005

The copper incense burner inlaid with gold and silver and purchased by the National Museum of Korea in 2002 was to be corroded severely throughout the surface. It was difficult to recognize the part with silver inlaying. Using the abrasive method with alumina, however, its splendid inlaying patterns were restored. Prior to applying the abrasive method, the quality was examined, and a material that could help bring out the patterns without causing too much damage to the artifact, selected. The overall condition of the incense burner was also checked through X-ray equipment to know the condition of the gold and silver inlaying, and by x-ray fluorescence spectroscopy to confirm the composition of the incense burner and gold and silver inlaying. The result of this process is expected to serve as valuable data in future research on incense burners inlaid with gold and silver.

• Food Science and Preservation
• /
• v.7 no.4
• /
• pp.357-361
• /
• 2000

Watercore influences storage and distribution industry of fruit. Therefore, the technique for nondestructive discrimination of watercore fruit is needed. This work reports about the possibility of watercore discrimination of ante using transmitted light, and the effects of various factors. CCD camera was used to capone images of each apple fruit. An excess watercore apples were higher light transmission score than little watercore apples. The accuracy fur discrimination of watercore apple was about 70% using transmitted light. Peel thickness, anthocyanin layer thickness and density of apple affected the light transmission. Apples having thin peel, thin pigment layer and low density tended to high transmitted light score. Apples of good color degree were more probability of existence watercore than ones of bad color degree. But color distribution of apple peel was not correlated with watercore.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2001

Soundness evaluation of a structure being constructed under the sea is usually difficult. In this study, a cross-hole sonic logging(CSL) which have been used for non-destructive test of concrete piles is adopted for the integrity test and monitoring of DCM(deep cement mixing) treated soils. Chemical and physical characteristics of raw ground materials are analysed to delineate ground environmental effects on the strength of DCM treated soils. In order to convert cross-hole sonic logging data into compressive strength, correlations between compressive strengths and wave velocities of core samples have been obtained. It is found that there is little effect of ground environment on the strength of the DCM treated soils, and the density distribution of core samples and cross-hole logging data show that a defective zone may exist in the DCM treated soils. With the time lapse, however, the defective zone has been cured and consequently, compressive strength of the DCM treated soils increases and satisfies the design parameter. From this study it can be concluded that the cross-hole sonic logging can be used for the integrity test as well as monitoring the curing stage of the structures, successfully.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.253-263
• /
• 1996

고온.고압하에서 장시간 사용되는 고온부재용 구조물은 경년열화현상을 나타낸다 그러므로 구조물의 안정성 측면에서 재질열화의 정도를 정량적으로 평가하는 것이 중요하다. 그러나 실기 구조물에서 채취할 시험편의 크기와 수는 제한이 되기 때문에 새로운 비파괴적인 평가법이 요구되고 있다. 따라서 본 연구에서는 화력발전설비에 이용되는 탄소강과 페라이트강에 대한 열화도의 평가를 위해 입계부식법의 적용 가능성을 조사한다. 시험결과, 재질열화의 정도는 사용시간보다 사용온도에 더 큰 영향을 받았으며, Larson-Miller인자와 열화도([$\Delta$DBTT]SP)사이의 관계는 선형적이었으나, 강종에 따라 다른 기울기를 보였다. 반면, 연성-취성천이온도 ([$\Delta$DBTT]SP)와 격자절단비(Ni/No)와 관계는 강종에 무관하게 선형적인 비례관계를 나타내었다. 또한, [$\Delta$DBTT]SP와 Ni/No 의 관계로부터 입계부식법은 페라이트계 강뿐만아니라 탄소강에 대해서도 유용한 재질열화 평가 방법임을 알 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.271-274
• /
• 2000

음파를 이용하여 덕트 내 길이 방향으로의 불규일 단면적을 측정하는 방법에 대해서 연구하였다. 이러한 역문제적 단면적 재구성은 덕트내의 비파괴 검사 및 인간 기도의 형상 조사 등에 중요한 의미를 지닌다. 음파를 이용하여 덕트내의 단면적을 재구성하는 과정은, 충격응답을 구하는 과정과 충격응답을 면적 재구성 알고리즘에 대입하여 덕트 내 단면적을 구하는 과정으로 나누어진다. 본 연구에서는 랜덤소스와 역푸리에 변환을 사용하여 덕트 내 충격응답을 구하였다. 예제를 통해 제안된 방법에 의해 덕트 내면적 재구성이 매우 정도 높게 실현 가능함을 보였다.

• Journal of Korean Society of societal Security
• /
• v.1 no.2
• /
• pp.87-92
• /
• 2008

This paper investigates the corrosion property of sprinkler pipe and provides the prevention solution. This study examines the property of stainless pipe widely used as sprinkler pipe and performs theoretical studies on the corrosion procedure. It was found that corrosion of the pipes mainly results from deterioration of pipe and wrong installation. The test result is expected to be useful in designing of the pipe system and minimizing of the corrosion.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.17-25
• /
• 1990

양표면은 무결점재를, 가운데 단판은 경사목리 및 목리방향의 할열을 가진 단판을 사용하여 제조한 3매 단판 적충재에 있어서 목리방향과 할열의 인장탄성계수 및 인장강도에 미치는 영향에 대하여 조사하였다. 또한, 비파괴 시험 방법인 응력파 실험에 의하여 각단판의 탄성계수를 측정하고, 이들 단판의 탄성계수로부터 단판적층재의 탄성계수를 예측하여 실측치와 비교하였다. 응력파에 의해 예측된 탄성계수는 인장실험으로부터 얻어진 결과와 거의 일치하였으며 인장탄성계수와 인장강도간에도 높은 상관관계를 나타내었다($r^2$=0.681). 인장강도에 있어서는 가운데 단판 할열의 영향은 나타나지 않았으나 목리의 경우 경사각이 증가함에 따라 인장강도가 감소하는 경향을 나타내었다.

• 보존과학연구
• /
• s.31
• /
• pp.131-140
• /
• 2010

This study shows the comparison of chemical compositions of main component with other bronze bells after the research on the component analysis by non-destructive XRF analysis. There are shrinkage cavities caused by the shrinkage defect and pores with pollutants on Bronze Bell of Heungguksa Temple with gamma radiation images and 77.3% of copper, 8.4% of tin and 10.9% of lead were determined as the main components of it with XRF analysis The tin content of Brozen Bell of Heungguksa Temple is less than those (11~18%) of other bronze bells but the lead content of that is higher. The lead content of it shows 10.91% which is quite high while generally the lead contents of other bells were controlled lower than 2.1%. Buddhist bells have the different lead content according to the period. The lead content was low until Silla Dynasty and Unified Silla period but it has been getting higher since some point of Koryo Dynasty. It is assumed that expensive copper and tin were replaced with lead.