• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.12-18
• /
• 1972

The relation between output SNR and mth harmonic generation is determined for nonlinear system of zero memory type, half wave and the nth power law devices with narrow band form of the unmodulated sinusoidal wave plus zero mean and stationary gaussian noise input. It is found that the optimum generation condition for harmonic component at a small input of SNR is m and n equal 2, while for large input SNR is always n equals 2.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.292-293
• /
• 2007

본 논문은 연속 시간과 이산 시간 비선형 상호 결합 시스템에 대한 분산 정적 출력 궤한 제어기의 설계에 대해 연구한다. 먼저 퍼지 모델 기법을 이용하여 비선형 상호 결합 시스템을 Takagi-Sugeno (T-S)퍼지 모델로 모델링한다. 각각의 하위 시스템에 대한 정적 출력 궤한 제어기를 병렬 분산 보상(PDC)기법을 이용하여 구한다. 선형 행렬 부등식(LMI)을 통하여 하위 시스템의 안정화를 위한 이득값을 구한다. 이득값을 통하여 하위 시스템들이 안정화되고 그를 통해 전체 상호 결합 시스템이 안정화됨을 모의실험을 통하여 증명한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.104-112
• /
• 2019

The material properties of the 3D printing cement composite mortar were evaluated, and the performance range in which printing was possible was calculated using the void ratio in a fresh state as a single index. As a results of the tests, as the water-binder ratio (W/B) increased, the mortar flow value increased and the density and strength decreased. As the sand-binder ratio (SS/B) increased, the mortar flow value decreased. However, strength and density increased and decreased up to a certain SS/B. As admixture-binder ratio (Ad/B) increased, mortar flow value, density, and strength decreased. These trends make it difficult to mix-design to meet the target performances of 3D printing mortars, represented by extrudability and buildability. The value of mortar flow increased proportionally with the void ratio, while the density and strength apparently decreased as the void ratio increased. This indicates that void ratio can be utilized as a single index for controlling the material properties in the design of mortar mixtures. It was found that mortar mixture could be printed by a 3D printer when the void ratio was in the range from 0.6 to 0.7. This was verified by printing a mortar which has the void ratio of 0.634. The mortar was produced with the mixture design of W/B 35.0%, SS/B 60.0%, and Ad/B 0.1%. Further research applying diverse admixtures is needed to improve the quality of 3D printing output mortars.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.377-380
• /
• 2006

본 논문에서는 통신해양기상위성의 지상국에 구축된 고 출력증폭기에 대한 특성 모델링 및 이에 따른 입력신호에 따른 출력 신호의 상호 간섭에 대한 결과가 정리되어 있다. 고 출력증폭기는 지상국에서 위성으로 신호를 전송할 때 필요한 장비로써 비선형 특성으로 인해 입력된 신호에 대한 다양한 하모닉 성분이 발생된다. 특히 통신해양 기상위성의 지상국의 경우에는 하나의 고 출력증폭기에 대해 두개의 서로 다른 주파수의 신호를 입력해야 하는 것을 고려해야 하기 때문에 이에 대한 영향은 사전에 반드시 분석되어야 한다. 본 논문에서는 고출력증폭기의 P1dB 특성곡선에 의해 특성 모델링을 수행한 결과 및 이러한 모델을 검증하기 위해 이미 정의된 두 신호에 대한 간섭의 양을 확인하였다. 특히 고 출력 증폭기의 전단에 속하는 상향 주파수 변환기의 특성을 고려한 신호를 사용하여 실제의 통신해양기상위성으로 데이터를 전송할 때의 결과를 얻는데 중점을 두었다. 그 결과 상호간의 간섭에 의해 발생되는 신호는 실제 보내고자 하는 신호의 대역과 매우 가깝게 있으며 그 크기는 보내고자 하는 신호의 특성에 따라 달라지는 것을 확인 할 수 있었다.

• 프린팅코리아
• /
• s.45
• /
• pp.158-163
• /
• 2006

다양해지는 디지털 이미지의 응용과 입력 장치의 보편화로 인해 정확한 컬러 표현의 필요성이 날로 높아지고 있다. 그러나 출력 장치인 모니터를 통해 디스플레이 되는 이미지들은 입력 및 출력장치들의 장치 의존적 컬러 신호의 차이와 입력 신호값에 대한 출력 신호 값의 비선형적인 변환으로 인해 원고와 최종 출력물의컬러에 색상의 차이가 발생한다. 정확한 색재현을 위해서는 올바른 색변환이 이뤄져야 하며 이를 위해서는 필요한 CMS의 도입이 무엇보다 중요하다. 그러나 현재 이에 대한 활용도는 매우 저조한 실정이다. 이에 본지에서는 얼마전 국내 최초 여성인쇄공학박사로 탄생된 조가람씨의 학위논문을 통해 입.출력 장치의 색변환 방법과 장치의 특성에 대해 살펴보는 자리를 마련했다. 다음은 조가람 씨가 박사학위 논문으로 제출한 '전자출판에서 입.출력 장치의 컬러 관리에 관한 연구'를 요약, 정리한 것으로 이번이 두번째이다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.64-70
• /
• 1999

We show that both cross and bar states with very high extinction ratios larger than 30 dB can be obtained in ultra short (< $100{\mu}m$) two-section vertical directional couplers. Based on the calculations of various possible combinations of the refractive indices of waveguides in each section using the improved coupled mode theory and beam propagation method, the guidelines for the design of ultra short two-section vertical directional couplers are presented to obtain both cross and bar states with high extinction ratios larger than 30 dB at the ends of section 1 and section 2, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.6
• /
• pp.503-510
• /
• 2002

This paper presents a fault diagnosis method using neural network-based multi-fault models and statistical method to detect and isolate faults in nonlinear systems. In the proposed method, faults are detected when the errors between the system output and the neural network nominal system output cross a predetermined threshold. Once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output. From the computer simulation results, it is verified that the proposed fault diagonal method can be performed successfully to detect and isolate faults in a nonlinear system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2002

In this paper, we propose an FDI(fault detection and isolation) method using neural network-based multi-fault models to detect and isolate faults in nonlinear systems. When a change in the system occurs, the errors between the system output and the neural network nominal system output cross a threshold, and once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output. From the computer simulation results, it is verified that the proposed fault diagonal method can be performed successfully to detect and isolate faults in a nonlinear system.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.185-192
• /
• 2010

Design of velocity-compounded turbine for 75ton class LRE turbopump application and pressure compounded turbine for 30ton class LRE turbopump has been performed. 1D calculation and CFD analysis were conducted in determining blade and flow passage shape of velocity compounded turbine iteratively. Finally, 23.1% improved specific power and 5% reduced weight turbine to the original design was developed. In case of pressure-compounded supersonic turbine design, rotational speed was increased by 50% and the effect of carryover ratio, 2nd nozzle installation angle, leakage flow of 2nd nozzle, and work sharing factor was studied. Final 1D design resulted 36% increased specific power and 51% reduced weight comparing to the original single-row impulse turbine. It is anticipated that nozzle flow path design will be very important for the accomplishment of expected performance of pressure-compounded turbine and nozzle shape optimization will be conducted through the CFD analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.976-987
• /
• 1998

In this paper, the effect of nonllinear distortion, caused by a high-power amplifier(HPA) in an orthogonal frequency division multiplexing (OFDM) system, on the receiver part is analyzed. Since the HPA, which can be modeled by a memeoryless Volterra system, distorts OFDM signals in a nonlinear fashion, the received signal at each subchannel includes the multiplicative distortion of 1-st order as well as additive nonlinear distortion of high-order. the nonlinear distortion can be viewed as a nonlinear interchannel interference (NICI) since it consists of harmonic distortions and intermodulation distortions, produced by oother subchannels affecting the subchannel of interest. In this paper, we analytically derive the variance of NICI in terms of average input power using the volterra model for HPA, and then calculate the bit-effor rate(BER) performance of an OFDM system. Also, we propose a simple method to compensate for the phase distortion in OFDM system amplified by HPA, OFDM system employing 16-QAM constellation input.