• Journal of Animal Environmental Science
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2002

This study was conducted to develope the new solid separating system which can be efficiently and economically removed the solid parts in high pollutants concentration of pig slurry. The pollutants concentration, BOD$_{5}$ , COD and SS of the slurry used in this study was 15,990($\pm$2,389)mg/l, 20,004($\pm$5,512)mg/l and 26,486($\pm$5,935)mg/l, respectively. After removal of solid part in slurry, the pollutants concentration, BOD$_{5}$, COD and SS was change into 5,617($\pm$690)mg/l, 5,553($\pm$633)mg/land 1,456($\pm$341)mg/l, respectively in the Fixed biological membrane tank. The reduction of the pollutants concentration of suspend liquid through membrane will be allowed to greatly improve the water purification by an Activated sludge method. This separating system consisted of a temporary storage, a circulating tank and a Fixed Biological membrane tank. A temporary storage which has a draining system of screw type and an aeration device played a tremendous role in draining the solid by filled an aeration of 0.3 l/min. A Fixed Biological membrane tank of which a styrofoam filled in a 2/3 volume as a Biological media was fixed by a stainless steel net (pore size : 0.5mm) to separate the liquid layer of influx in them. The separating system efficiency factors were the speed of screw motor, cycle number of slurries in a circulating tank and moisture contents of solid effluent through the screw path. Although the pollutants concentration was very variable in temporary storage, the final concentration of $BOD_5$ and SS, except COD of the suspended liquid in a Fixed biological membrane were not different regardless of cycle number of a circulating tank. Moisture contents of effluent from temporary storage was 73% under the speed 1 ppm of screw motor and 62% under the 1/4rpm of it.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.11
• /
• pp.25-31
• /
• 2013

Civil and military firing ranges are usually contaminated with heavy metals such as lead and copper and remediation is required. Acid washing and extraction are common remediation methods. Lead contaminated firing range soil samples were collected and a preliminary study was conducted to evaluate the characteristics of the contamination and the contribution of high specific gravity particles. Ethylenediamine tetra acetic acid(EDTA) extraction was applied for the removal of heavy metal but the extraction was not feasible for the firing range soil. Even after the repeated EDTA extraction, the contamination were still over the Korean environmental standard indicating that soil particles highly contaminated with heavy metal which release the heavy metal ion even after the repeated extraction. Some colored and higher specific gravity particles were separated from the soil samples and analyzed. The colored particles have specific gravity of 2.5-6.6. The saturation ratio of Pb and EDTA was 4.9-32%. After removal of these colored particles, the sandy soil showed moderate contamination which can be treated with soil washing. This was proved with the five-level sequential extraction and TCLP tests.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.67-74
• /
• 2016

This study was purposed to evaluate the characteristic changes of the solidified livestock manure fuel(SLMF) through the application of compression treatment process. The compression process led to an increase of VS/TS ratio (Volatile solids/Total solids ratio) and moisture removal effect of SLMF. The amount of leachate withdrawn from dairy cattle manure and Hanwoo manure by compression were 21~26%(w/w) and 15~20%(w/w), respectively. The specific gravity of the leachate of dairy cattle manure and Hanwoo manure were 1.01 and 0.99, respectively. The dehydrated cow manure was easily processed into ball-shaped solidified fuel. The drying time of the SLMF was proportional to the diameter of the solidified fuel. The highest heating value was observed in diameter range of 10~15mm SLMF. It is concluded that the higher heating value of 10~15mm SLMF was related with the amount of fibrous matter contained in the SLMF.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.305-311
• /
• 2012

In order to recycle the coal bottom ashes (denoted as BA) produced from a thermal power plant, the artificial aggregates (denoted as AAs) containing BA and red clay were manufactured, and the physical properties of AAs were studied as a function of particle size of BA and batch compositions. As-received BA had 38 wt% coarse particles of above 2 mm and many unburned carbon mass and porous slag particles were co-existed. So the two particle sizes of BA, the fine (< 100 ${\mu}m$) and coarse (< 2 mm), were prepared by milling and screening process. The AAs containing fine BA sintered at $1100{\sim}1200^{\circ}C$ had the higher bulk density and lower water absorption compared to the specimen made of coarse BA. The inside core of AAs manufactured by using coarse BA showed nonuniform and porous microstructure, while the AAs made of fine BA had a uniform and dense microstructure. In this research, the AAs containing BA and red clay with various bulk density (1.2~1.7) and water absorption (13~21 %) could be manufactured by controlling the particle size of BA and batch compositions, so the AAs of various physical properties could be applied to the wide fields such as construction/building materials in near future.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.276-283
• /
• 2012

Changes in rock properties due to freezing and thawing cycles ranging from $-20^{\circ}C$ to $10^{\circ}C$ were checked for the typical Korean rocks: granite (weathered), limestone, sandstone, tuff, shale and basalt. The porosity, seismic velocity, shore hardness and specific gravity were measured every 10 cycles for each type of rock up to 40 cycles. The specific gravity was rarely changed. Granite (w), shale and basalt decreased gradually in their shore hardness and seismic velocity values, these values for limestone, sandstone and tuff changed only a very little. The porosity increased in the granite (w), shale and basalt, whereas in the others it did not change. Due to the low tensile strength with high porosity, granite (w), shale and basalt were susceptible to the F-T cycles. A linear regression equation was calculated based on the experiment results according to properties and types of rock. The relationship between the freeze-thaw sensitivity (=initial porosity/initial tensile strength) and the coefficients of the regression equation was examined. With additional experimental data, the coefficients of the regression equation can be estimated using the F-T sensitivity. This makes it possible to predict the properties of rock as affected by freeze-thaw weathering by only measuring the initial properties without knowledge of the regression equation coefficients for each type of rock.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.312-312
• /
• 2023

동진강 유역은 김제평야를 품고 있어 다른 지역에 비해 농지면적이 차지하는 비중이 크며, 이에 따라 전체 용수 사용량에서 농업용수의 비중이 절대적으로 높은 유역이다. 낙양 보는 동진강 중·상류에 위치한 이수시설로 상류에 위치한 섬진강댐과 같이 동진강 유역의 농업용수 공급에 중요한 역할을 하고 있다. 낙양 보는 현재 동진강 방수문 4문, 김제간선 취입수문 2문, 정읍간선 취입수문 1문이 설치되어 있다. 관개기에는 동진강 도수로의 수문을 폐쇄하여 동진강 본류로의 하천유지용수를 차단하고 김제 배수로의 수문을 운용하여 농업용수를 공급하고 있으며 수혜구역의 용수수요 변화 및 기상상황, 하천상황에 따라 탄력적으로 운영하고 있다. 이러한 가동 보 운영으로 인하여 다양한 수위-유량관계의 변동성이 발생한다. 본 연구에서는 가동 보 운영에 따른 수위-유량관계 곡선식의 변동성을 확인하기 위해 동진강 유역 낙양보 상류에 위치한 정읍시(거산교)관측소를 대상관측소로 선정하였다. 정읍시(거산교)관측소는 2012년에 개발된 수위-유량관계곡선을 2021년까지 사용하였고, 2022년 수위-유량관계곡선식 검증과 재개발을 위하여 유량측정을 실시하였다. 2012년에 개발된 수위-유량관계곡선은 검토 결과 강우에 의한 수위 상승시 보 완전 개방 상태의 측정성과를 확보하여 수위-유량관계 곡선식을 개발하였다. 그 결과 가동 보를 운영하는 3월~9월은 상류에 위치한 정읍시(행정교)관측소와 상하류 역전 현상이 발생하였고, 매년 비정상적인 유량이 산정되는 결과를 초래하였다. 2022년 신뢰도 높은 유량자료와 수위-유량관계곡선식 개발을 위해 낙양 보 완전개방 및 부분개방에 따른 다양한 유량측정성과와 낙양 보 수문 모니터링 결과를 확보하였다. 낙양 보는 2022년 1월~3월, 10월~12월은 수문 6문을 완전 개방하여 동진강에 하천유지용수를 공급하고, 4월부터 동진강 방수문을 폐쇄하여 농번기 농업용수를 확보한 후, 5월~9월에 확보된 농용수를 김제 배수문 2문을 부분개방하면서 공급하는 방식이다. 이 기간동안 낙양 보 수문에 대한 모니터링을 위해 정읍시(거산교)관측소 수위자료에 대한 검토를 실시하였으며, 유량측정시에는 정확한 유량측정성과와 곡선식 확인을 위하여 동일한 위치에서 측정을 수행하였다. 또한, 수위 또는 유량이 변하는 구간은 연속측정을 실시하였으며, 모니터링 결과와 유량측정성과를 바탕으로 수위-유량관계 변화를 분석하였다. 그 결과 저수위1식은 수문 완전개방, 저수위2식은 수문 완전폐쇄, 저수위3~6식은 수문 부분개방 곡선식을 개발하였으며, 저수위 구간은 낙양보 운영에 따라 총 27차례 기간분리가 발생하였다. 결과적으로 본 연구에서는 낙양 보 운영에 따른 다수의 유량측정성과와 모니터링 자료를 확보하였으며, 확보한 유량측정성과의 분석을 통한 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.206-215
• /
• 1999

Volatile flavor components in five varieties, Bekdo, Chundo, Yumung, Daegubo and Hwangdo, of peach (Prunus persica L.) were extracted by SDE (Simultaneous steam distillation and extraction) method using the mixture of n-pentane and diethylether(1:1, v/v) as an extract solvent. Analysis of the concentrate by capillary gas chromatography and gas chromatography-mass spectrometry led to the identification of 83, 85, 70, 74 and 66 components in Bekdo, Chundo, Yumung, Daegubo and Hwangdo, respectively. Aroma patterns (29 alcohols, 27 ketones, 18 aldehydes, 9 esters, 5 ethers, 3 acids, 6 terpene and derivatives, and 26 miscellaneous) were identified and quantified in five cultivars. Ethyl acetate, hexanal, o-xylene, (E)-2-hexenal, hexanol, (E)-2-hexen-1-ol, benzaldehyde, r-decalactone and r-dodecalactone were the main components in each samples, though there were several differences in composition of volatile components. Beside C$\_$6/ compounds, a series of saturated and unsaturated r- and $\delta$-lactones ranging from chain length C$\_$6/ to C$\_$l2/, with concentration maxima for r-decalactone and r-dodecalactone, were a major class of constituents. Lactones and peroxidation products of unsaturated fatty acid (i.e. C$\_$6/ aldehydes and alcohols) were major constituents of the extract.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.22-30
• /
• 2006

The goal of the company and profit maximization can be achieved by creating revenue or reducing costs. What can be done by the effort of the firm itself is possible through cost-reduction rather than through revenue-creation. Under this economic situation, one of the best way for cost-reduction is to reduce cost of logistics. But logistics costs of a firm is continually increased because of the various customer-satisfaction, competition. This study considers that logistics cost management system be able to apply business practice through to used only a merit of CVP(Cost - Volume Profit) analysis method for effective decision making. To conclude, this study depicts that logistics cost management according to used a merit of CVP analysis method can provide information useful for making strategy of logistics. In short, It is reduce to more costs of logistics investment than are necessary. and, I will expect a man who charge logistics to improvement, adaptation, and application.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.189-201
• /
• 1999

범용 열가소성 플라스틱(polyethylene(PE), polypropylene(PP), polystyrene(PS), polyethylene-terephthalate(PET), acrylonitrile-butandiene-styrene(ABS))과 폐윤활유의 동시처리 열분해반응 실험을 수행하였다. 반응실험은 40$m\ell$ 용량의 회분식 미분반응기(microreactor)를 이용한 실험과 1리터 용량의 autoclave를 이용한 실험의 두 가지로 구분하여 행하였다. 전자의 경우는 통계적 실험적계획법(statistical experimental design)의 하나인 회전계획실험(rotatable design experiments)으로서 오각형 실험계획(pentagonal experimental design)에 의거한 반응변수 실험을 수행한 후 반응표면(response surface)을 회기분석법에 의하여 분석함으로써 최대의 오일 수율을 얻을 수 있는 최적 반응조건을 추적, 결정하였다. Autoclave 반응실험의 기본적인 목적은 실제 연속공정에 있어서 열분해 반응기 거동을 모사하기 위한 전초단계로서 충분한 시료의 확보를 통하여 이 때 생성된 연로유의 체계적인 분석(비등점분포특성, 진공증류, 기체분석, 원소분석, 발열량, 비중 등)을 행함으로써 연료유 수율 및 품질을 모사하고자 하였다. 미분반응기 실험에 있어서 주 범용열가소성수지인 PE, PP 그리고 PS는 각각의 최적반응조건하에서 거의 100%에 가깝게 오일로 전환되었지만 응축수지인 PET와 그래프트공중합수지인 ABS의 오일수율은 각기 78% 및 90%로서 상대적으로 낮게 나타났다. Autoclave를 이용한 실험의 경우 혼합플라스틱을 폐유에 대하여 40wt% 혼합하여 열분해하였을 때, 80wt% 오일, 15wt% 코우크, 그리고 나머지 5wt%는 탄화수소기체(C1-C6)로 전환되었다. 진공증류(252$^{\circ}C$,2 torr) 결과, 기/액-분리도는 3으로서 이는 생성오일의 75wt%가 경질연료유(가솔린, 등유, 경유)로 회수 가능하였다.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.11-16
• /
• 1999

Oil and LNG products are characterized by the facts that the raw materials are all imported and financing is dependent heavily upon foreign countries. This makes the oil and LNG products sensitive to changes in foreign exchange rates. However, the extent to which they respond to changes in foreign exchange rates, particularly the extent of price changes, vary considerably, due to the differences in the structures of price determination. The purposes of this paper are twofolds. The first one is to analyze the structures of price determination of diesel, heavy oil, and LNG. The second one is to analyze the effects of changes in foreign exchange rates on the prices of and price competitiveness of the fuels in question through the sensitivity analysis. The results of the sensitivity analysis indicate that diesel price is most sensitive and heavy oil price is least sensitive to changes in foreign exchange rates.