• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.449-456
• /
• 2019

Recent developments in architectural technologies and programs have enabled architects to think creatively and design free-form architecture. however, there are many problems in the production technology of FCP(Free-Form Concrete Panel). In particular, reduced accuracy due to lack of free-form panel production technology can lead to redesign of buildings as a result, problems such as an increase in construction cost and period. Therefore, this experiment aimed to compensate the decrease of the accuracy according to the displacement difference and to derive the proper mixing ratio for maintaining the shape during the free-form panel curing. In this study, molds were made using paraffin that is a recyclable phase change material. Concrete Panel is usually produced from Portland cement, dead burn magnesia, phosphate, borax and fine aggregate. In this study, four mixing ratios of FCP were selected after each material was blended to determine the proper blending ratio of the fluidity phase, the water absorption rate and the water content of the test piece. FCP was fabricated on the basis of the selected four compounding ratios and thickness and error rate were measured. Based on the error rate of the measured FCP, the quality standard was satisfied among the four compounding ratios.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.49-57
• /
• 2010

Most previous research on the seismic response of structures with plan irregularities have focused on the relationship between the eccentricity and the amount of torsion. This approach cannot provide the direct relationship between the irregularity and the damage. Therefore, an investigation on the relationship between the eccentricities of buildings with plan irregularities and the damage index was performed. Inelastic dynamic time-history analyses were performed on one-story buildings with various eccentricities. For the damage assessment, a 3D damage index was adopted to reflect the effect of the bi-directional response and torsion. Based on the analysis results, buildings with eccentricities of 10%, 20% and 30% will suffer 3~5%, 13~18%, and 33~47% more damage than their regular counterparts, respectively.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.1
• /
• pp.37-44
• /
• 2001

면진기술은 주로 저층 구조물의 내진설계에서 적용되는 방법으로 건물과 기초사이에 면진장치를 설치하여 상부로 전달되는 지진하중을 효과적으로 감소시킨다. 그러나 이 방법은 중.고층 구조물에 그대로 적용하기에는 여러 가지 기술적 문제가 따르므로, 구보물의 중간층 일부를 분리시켜 상부로 전달되는 지진력을 감소시킬 수 있을 것이다. 본 노문에서는 저층 뿐만 아니라, 중.고층 정형구조물의 주상복합건물과 같은 비정형 구조물에 대하여 구조물의 중간층 일부를 비선형 면진장치로 면진시키고 그 효과를 분석하였다. 이러한 중간층 면진 구조물의 경우, 고정기초 구조물에 비하여 적은 층간변위나 층전단력이 발생하였으며, 특히 주상복합건물에서 상당한 효과를 볼 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.335-338
• /
• 2016

최근 디지털 정보들은 각종 매체에 저장되어 다양하게 활용되고 있다. 그 중 범죄관련 비정형데이터의 분석과 활용은 범죄수사에 유용한 자료로 활용될 수 있다. 그러나 기존의 범죄통계 자료의 분석 및 활용은 정형데이터를 이용한 제한적 접근에 그치고 있다. 따라서, 본 논문은 수사 자료 중 처리되지 못한 비정형데이터를 분석, 저장, 처리하여, 수사 자료로 활용할 수 있도록 정형데이터화 함으로 범죄 프로파일링에 도움이 될 것으로 기대된다.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.155-162
• /
• 2020

Since the third industrial revolution has been started in the 1980s, the form of buildings has been varied and atypical by the development of building technology. Such free-form building has a curved shape unlike the existing standard buildings, and to realize this, it is necessary to manufacture the free-from panel. The shape of the free-form panel must satisfy a limited error ratio compared with the design shape, and the technology to produce free-form panels is very difficult. However, there are many problems such as enormous cost and construction waste generation when implementing free-from construction. Therefore, the development of free-form panel manufacturing technology should be made to solve the problems caused by the free-form construction. In this study, the error rate analysis of the mixed mortar panel was conducted by selecting the proper mixing ratio of the mixed mortar for the shape of the free-form panel.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.14-26
• /
• 2017

With the development of computer technology, many different kinds of digital design tools have been developed and used. In the circumstance, methodologies of digital process have more been researched. Despite various atypical forms, there have been limits to the application and practical use of the mobile technology for approaches to the creation of architectural forms and various circumstances. Therefore, this study tries to analyze previous studies and actual conditions of mobile application in order to recognize the research necessity and suggest the possibility of the atypical form creation in the mobile environment. In short, the purpose of this study is to recognize the necessity of the smart mobile application for making idea & learning tools, suggest the process based selective application method (not analytical application) of smart mobile application technology to make possible atypical form creation in the initial step of architectural design processes, and propose a new method of mobile application.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.75-80
• /
• 2022

Recently, research and development on immersive virtual reality(VR) technology to provide a realistic experience is being widely conducted. To provide realistic experience in immersive virtual reality for VR participants, virtual environments should consist of high-realistic environments using 3D reconstruction. In this paper, to acquire 3D information in real space using multiple cameras in the reconstruction process, we propose a novel method of optimal camera placement for accurate reconstruction to minimize distortion of 3D information. Through our approach in this paper, real 3D information can obtain with minimized errors during environment reconstruction, and it is possible to provide a more immersive experience with the created virtual environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.102-110
• /
• 2015

In this paper, adaptive matching method using the same features for rigid and deformable object images is proposed. Firstly, we determine whether the two images are matched or not using the geometric verification and generate the matching information. Decision boundary which separates deformable matching-pair from non-matching pair is obtained through statistical analysis of matching information. The experimental result shows that the proposed method lowers the computational complexity and increases the matching accuracy compared to the existing method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.655-666
• /
• 2014

Recently, as the appearance and exterior design of the construction structure are highlighted, the irregularly shaped structures are increasing in a construction facility. Many softwares provide a quantity take-off function of 3D object under BIM environment, however, they are focused on the limited function based on the solid modeling method. Because the vast geometric information of the curved surface is difficult to extract in the 3D objects that consist of major changes in vertical section shape as the irregularly shaped structures, it is difficult to express a 3D object as a solid model. On the other hand, the irregularly shaped structures can be expressed in relatively free in the surface model because the surface model consists of points, lines and surfaces. Accordingly, the surface modeling method is suitable for the modeling of large irregularly shaped structures. This study suggests a quantity take-off algorithm for the irregularly shaped structures using the surface modeling approach that is beneficial in the design work of structures. Some case projects are used for verifying the accuracy of the proposed method.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.2
• /
• pp.83-89
• /
• 2015

Although Mycobacterium tuberculosis complex strains remain responsible for the majority of diseases caused by mycobacterial infections worldwide, the increase in HIV (human immuno deficiency virus) infections has allowed for the emergence of other non-tuberculous mycobacteria as clinically significant pathogens. M. tuberculosis was detected by two-tube nested polymerase chain reaction (PCR) and non-tuberculous mycobacteria was detected by PCR-restriction fragment length polymorphism (RFLP) with Msp I. Result of niacin test is equal to result of two-tube nested PCR after culture for M. tuberculosis. In this study, acid fast bacilli stain (AFB. stain) >2+ case, Detection of Mycobacteria is similar to result before culture and after culture. AFB. stain <1+ case, result of mycobacteria is distinguished. Conclusionly, these results suggest that identification of mycobacteria must go side by side both culture and PCR for more fast and accuracy.