• Journal of the Korean Magnetics Society
• /
• v.17 no.3
• /
• pp.128-132
• /
• 2007

The thermal and magnetic properties of amorphous (FeCo)SiBNb ribbon alloys with high glass forming ability have been investigated. The glass forming ability was enhanced by Co substitution in amorphous ($Fe_{1-X}Co_X)_{72}Si_4B_{20}Nb_4$ alloys with the thickness of about $40{\mu}m$. With the increase in Co content, the temperature range of supercooled liquid phase increased indicating the high glass forming ability of the Co-added alloys. Further the ac permeability increased, and the core loss decreased considerably by Co substitution, while small change in $B_8$ (magnetic flux density at 800 A/m) was observed. The frequency characteristics of permeability deteriorated as compared to conventional amorphous ribbon alloys with the thickness of about $20\;{\mu}m$ due to the increased skin effect.

• 전기의세계
• /
• v.44 no.3
• /
• pp.9-14
• /
• 1995

비정질 core의 Butt-lap-step joint model의 자계를 유한요소법을 이용하여 해석한 결과, step당 리본 수의 변화, 설계자속밀도의 변화, 코아 연결부의 형상 변화에 따른 특성을 분석하면 다음과 같이 요약할 수 있다. (1) Step당 리본 수의 변화에 따른 영향에서 리본수가 작을수록 코아 전체의 flux density의 편차가 작으며 최대값 역시 낮으므로 유리하다. (2) 설계자속밀도의 변화에 따른 코아 부위의 자속 변화는 인가하는 설계자속밀도의 값이 높을수록 균일한 자장 분포를 얻을 수 있다. (3) 코아의 적층 방법의 변화에서는 Butt-Lap-Step방식이 가장 유리한 결과를 얻을 수 있었지만 코아 곡률부의 형상 변화가 중요한 요소로 작용한다. (4) 최적 step수, ribbon/group 수, airgap 길이 등은 전체 model의 특성, 손실, 제작성 등을 고려하여 결정하는 것이 바람직하며, 유한요소법의 해석으로는 전체적인 비정질 코아 변압기의 전기적인 특성과 경향을 도식화하여 설계자에게 좋은 설계방향과 정보를 제공할 수 있게 된다. 또한 비정질 코아의 특성상 종래의 일반적인 유한요소법으로는 많은 계산시간과 큰 computer system을 요구하는 core의 미세부분의 해석은 새로운 계산기법을 도입하여 계산해야 할 것이다. 이러한 문제해결을 위하여 3절에서 설명한 Asymptotic Expansion을 이용하여 균질화(homogenized)된 투자율 (또는 reluctivity)를 산출하고, 여기에 유한요소기법을 도입하여 단점을 보완한 새로운 기법의 algorithm을 개발하고 있으며, 이 기법은 계산시간의 단축과 Microscopic하게 자속밀도 분포를 관찰 할 수 있으므로 joint 부분의 자속경로와 손실 등 비정질 코아의 설계 Parameter를 설정하는 결정적인 역할을 할수 있을 것으로 기대된다.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2009

Magnetic bias phenomena of field-annealed CoFeSiB amorphous ribbons showing asymmetric giant magnetoimpedance was investigated by MOKE method. The specimens removed the crystalline layer at one surface side by chemical etching were prepared and measured magnetization curves by MOKE to investigate the effect of the crystalline layer on magnetization of inner soft amorphous phase. We observed the shift of hysteresis loop, and concluded that the crystalline layer exerts bias field effect on inner soft amorphous phase and the direction of bias filed is opposite to the magnetization direction of surface crystalline layer.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.36-39
• /
• 1996

We have constructed a disp1acerrent sensor for measuring dynamic magnetostriction of an arrvrphous ribbon under alternating magnetic field using fiber optic Fabry-Perot interferorreter. The signal of the sensor was depen¬dent on the index matching oil and the optical isolator. The resolution of the sensor was $30{\AA}$ and the measured peak to peak magnetostriction of the amorphous ribbon $Fe_{81}B_{13.5}Si_{3.5}C_{2}$ was $28{\times}10^{-6}$.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.319-332
• /
• 1988

높은 포화자속밀도와 낮은 철손을 갖는 Fe/aub 80/B$_{12}$Si$_{8}$ 비정질합금을 일반열처리, 자장열처리시켜 그의 자기적특성과 자구구조와의 관계를 조사하였다. 이를 위하여 Fe$_{80}$B$_{12}$Si$_{8}$ 비정질리본을 단롤법으로 제작하여 결정화온도를 측정하였으며 측정된 결정화온도 이하의 여러 온도에서 30분간 Ar-gas 분위기하에서 일반열처리, 자장열처리를 행하였다. 이와같이 하여 준비된 시료의 자기적특성을 조사하기 위하여 D.C., A.C. Recorking Fluxmeter를 이용하였으며 자구구조는 Bitter method로 관찰하였다. as-cast 상태의 시료를 일반열처리함에 따라 내부응력이 완화되면서 maze자구가 점차 사라지고 wave형태의 180.deg.자구가 관찰되었다. 동시에 자화과정에 있어서 자기이력곡선은 Barkhausen jump가 없어 smooth하였다. 그리고 자장열처리시에는 as-cast 상태나 일반열처리에 비해 자기적특성이 현저하게 향상되었으며 이는 열처리를 행함에 따라 내부응력이 완화되면서 maze 자구가 없어지고 일축자기 이방성으로 리본길이방향에 평행하게 형성된 180.deg.자구에 기인하는 것이라 사료된다. 그리고 자장열처리의 경우, 폭방향으로 열처리한 리본의 자구폭은 길이방향으로 열처리한 리본의 폭보다 미세하였으며 전자의 이력손실이 후자의 것보다 더 컸다.다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.4-9
• /
• 2015

This study was carried out to investigate a influence of humidity variation (%) on the magnetic properties and the surface flaws in the fabrication of Fe-based $Fe_{78}Si_9B_{13}$ amorphous alloy ribbon by Planar Flow Casting process. As a result, the size of the air pocket and the droplet which is observed in the contact surface and the free face of the amorphous alloy ribbon becomes large when the humidity increases and the size highly increases with the surface roughness at the same time. Especially, the surface roughness value which is made in the 65 % of the humidity is the lowest in the contact surface ($Ra=0.60{\mu}m$, $Rz=3.11{\mu}m$) and the free face ($Ra=0.47{\mu}m$, $Rz=3.00{\mu}m$). Also, in case of the soft magnetic property of the magnetic core which is made with the toroidal core of $23(OD)^*20(ID)^*20(H)$ size, in the sample of the amorphous alloy ribbon which is made in 65% of the humidity, the most excellent value is gained as $B_s(B_{700})=1.055T$, $H_c=0.083Oe$, permeability = 1,197 and core loss = 0.276W/kg.

• Journal of the Korean Magnetics Society
• /
• v.12 no.4
• /
• pp.154-159
• /
• 2002

Amorphous FeBSiNb alloy ribbons having bulk glass forming ability and high saturation magnetic flux density were produced by single-roller melt spinning apparatus in the thickness range of 22∼102㎛. With the increase of thickness, the coercive force and squareness ratio decreased, while maximum permeability and AC permeability increased. However electrical resistivity was almost constant. Furthermore refined and complex magnetic domain structure was observed in thicker ribbons owing to the change in internal magnetic anisotropy. For the alloy with the thickness of 81㎛, small coercive force of 24 mOe and high effective permeability of 12,000 at 1㎑ were obtained, those are considered to be better comparing to the conventional soft magnetic amorphous alloys (∼20 ㎛). The good soft magnetic properties of the thick FeBSiNb amorphous alloys were attributed to the decrease in surface pinning effect during wall motion, appearance of perpendicular anisotropy and resulted domain refinement.

• Journal of the Korean Magnetics Society
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2000

Amorphous Fe$_{79.7}$Si$_{9.3}$B$_{9.7}$Ni$_{1.4}$ ribbon alloys were fabricated by a single roll method. To enhance D. C. bias properties, the magnetic and micro-structural changes have been investigated as the variation of annealing time and condition. The D. C. bias properties were found to be directly related to micro-structural changes. Primary ${\alpha}$-Fe dendrites with 200∼300 nm showed the best D. C. bias properties, which resulted from the magnetic domain wall pinning effect. Due to the differences of cooling rate, the growth shape and distribution of the dendrites is divided into two areas.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.261-268
• /
• 1995

In order to investigate the origin of the asymmetric magnetization reversal effect, we studied the variation of magnetic hysteresis loops with the alloy composition in amorphous ferromagnetic alloy ribbons of ${(Fe_{1-x}Co_{x})}_{75}Si_{10}B_{15}$ system annealed at $380^{\circ}C$ for 16 hours in a zero field condition. The asymmetric magnetization reversal effect developed more strongly in amorphous ribbons having two metallic components than in ribbons having a single metallic component. The effect developed more strongly in ribbons showing a smaller value of the saturation mag¬netostriction. The development of the asymmetric magnetization reversal effect was affected by the ratio of two metallic components as well as the magnitude of the saturation magnetostriction.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.11a
• /
• pp.88-89
• /
• 1997