• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.169-178
• /
• 2004

본 연구의 목적은 응급구조사들이 긴 척추고정판을 이용하여 환자를 들어 올리는 3가지 다른 자세와 다른 3가지 부하 조건을 이용하여, 요추 4번과 5번의 압축력, 전단응력 그리고 합력의 변화를 동역학적 모델을 제시하기 위한 분석이다. 연구방법 : 36명의 남자가 본 연구의 실험에 자발적으로 동원되었으며, 나이는 평균 21.42세이고, 신장은 평균 174.05cm이며, 체중은 평균 78.05kg이다. 이 실험에서 부하 조건은 50, 70, 90kg이고, 들어 올리는 높이는 지상에서부터 95cm 이었으며, 들어 올리는 동안의 회전고리는 110cm이었다. 운동현상학적 자료는 2-D ProReflex Motion Capture Camera을 이용하였으며, sampling rate는 60Hz로 하였다. 결과 및 논의 : 동역학적 데이터 자료를 근거로 한 본 연구의 결론은 다음과 같다. Lunge 자세기술에서 전단응력과 합력 등이 최소의 stress로 요추 4번 5번에 미치는 것으로 나타났다. 그러나 Lunge 기술에서 압축력은 약간 증가되는 것으로 나타났다. 이 연구에서 Stooped 자세기술에서는 아주 큰 전단응력과 합력 등이 요추 4번, 5번 관절에 넓게 작용하는 것으로 나타났으며, 이는 들어 올리는 동작을 할 때 상해의 원인이 된다고 사료된다. 특히 응급구조사들이 들것을 들어 올릴 때 너무 큰 전단응력이 요추 4번, 5번 관절에 작용을 하면 비정상적으로 병리학상 또는 해부학상 신체적변화가 온다고 해석할 수 있다. 그래서 응급구조사들에게 들것을 들어올리는 stooped 자세는 아주 크고 많은 합력 작용하기 때문에 권고될만한 기술이 아니라고 해석 된다. Squat 자세에서 중간 정도의 압축력, 전단응력 그리고 합력이 작용된다. 만약 응급구조사가 전단응력 그리고 합력이 요추에 미치는 영향이 가장 걱정된다면, lunge 자세가 두 가지 힘을 줄여줄 수 있다고 사료된다. 마지막으로 응급구조사가 들것을 들어올리는 데는 squat 자세 기술이 가장 좋다고 사료 된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.735-743
• /
• 2011

In this study, the distribution of surface pressure was measured in a steady state on a turbine blade which was moved the injected region and receded the stagnation region using a linear cascade apparatus. Axial-type blades were used and the blade chord was 200mm. The rectangular nozzle was applied and its size was $200mm{\times}200mm$. The experiment was done at $3{\times}10^5$ of Reynolds number based on the chord. The surface pressures on the blade were measured at three different nozzle angles of $58^{\circ}$, $65^{\circ}$ and $72^{\circ}$ for off-design performance test. In addition, three different solidities of 1.25, 1.38 and 1.67 were applied. From the results, the low solidity caused the low pressure on the blade suction surface at entering region and the reverse rotating force was generated at the low nozzle angle. The positive incidence also made the pressure lower on the suction surface at entering region.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.335-343
• /
• 2015

The role of the turnouts installed on the points of railway branches and intersections is to safely switch the directions of trains. In case of abnormal forces applied to the turnouts due to extreme operating conditions, it is difficult in the current system to conduct accurate diagnosis and measuring. Moreover, the existing measurement devices for turnout switching power are mostly based on foreign technologies, which provide only limited information on the switching power; this information is insufficient for effective monitoring and maintenance. In this paper, through an analysis of the characteristics of the switching and locking function, the problems in turnout power measurements of current electrical point machines in Korea are examined. And based on the results, a new sensor-based method for measuring switching power is proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.295-301
• /
• 2009

In general the stability of soil nail-slope system, the shear resistance is neglected because the tensile resistance of nail acts mainly for slope stabilization. This is because that deformed steel is generally used for nail and it does ductile behavior. In other side when the steel pipe with high rigidity is used for nail, the shear resistance at failure surface work more than deformed steel. In order to analyze effects of shear resistance at the soil nail-slope system with high steel piped nail, a series of numerical analyses were performed. Also numerical analyses at 3 conditions - 5 nailed, 7 nailed, 9 nailed at the same slope were perfomed for investigating the trend of shear resistance effect. From these 3D numerical analyses, it was found that the maximum shear resistances at each nails were larger in case of steel piped nail and because of this, the factor of safety at the condition of the steel piped nail appears larger than that of deformed steel nail.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.549-557
• /
• 1997

This study was designed to investigate the attrition pattern in Angle Class III malocclusion with facial asymmetry. The sample consisted of three groups, the 20 subjects of normal occlusion group(Group I), the 12 subjects of class III malocclusion without facial asymmetry group(Group II) and 17 subjects of Class III malocclusion with facial asymmetry group(Group III). Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date processing. Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date Processing. All attrition areas were measured 2 times and the average value was used for data processing The data were statistically analyzed by SAS program. The results of this study were as follows. 1. Total attrition area in Group I was larger than in Group II and III. 2. There was no significant difference in attrition area between right and left side in each group, but attrition area in Group III was larger than in Group I and II. 3. In Group I, Maxillary attrition area was larger than mandibular attrition area, but in Group ll and III, there was no significant difference in attrition area between maxilla and mandible. 4. In Group III, the attrition area of deviated side was target than undeviated side 5. There was no significant difference in attrition area between chewing side and non-chewing side in each group. 6. The total attrition area was unaffected by gender.

• Journal of Naturopathy
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2019

Purpose: The purpose of this study was to investigate whether Qihyul-therapy was effective against subjects of bad Qihyul circulation who had narrowed muscles of the buttocks, a distorted body shape, or pain. Methods: Qihyul-therapy used. Results: The muscles of the buttocks remained almost untouched. The elasticity of the muscles restored. The skin tone brightened, and the anal muscle strengthened after Qihyul-therapy. The subject's body was shifted to the right by -7°. The right arm was about 6 cm longer than the left arm. But after correction, the right arm was about 5 cm shorter. The distorted body was almost balanced. After neck and shoulder correction, the distance between the collarbone and neck was 7~10 cm wider. After the pelvic correction, the pain in the buttocks was relieved, and the position of the hip joint returned correctly. The right leg that was turned 45° to the left was corrected, and the length became the same. Subjects had no knees attached, their right knees were up 5 cm above the left, and their ankles bent at an angle of 30 ° relative to the left, but after correction, the knees of the two legs stably attached. The height of the knee became the normal angle. Conclusion: If the Qihyul-therapy, the spine correction Qihyul-exercise and the pelvic correction Qihyul-exercise performed steadily, the deformed body shape restored adequately, and it is useful to prevent and cure related diseases by alleviating the pains.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1385-1391
• /
• 2010

In this study, we present small-size, low-power, and high-speed electromagnetic flapping shutters for phone cameras. These shutters are composed of trapezoidal twin blades suspended by H-type torsional springs. The existing electrostatic rolling and flapping shutters need high input voltage, while the existing electromagnetic rotating shutters are too big to be used for phone cameras. To achieve low-power and high-speed angle motion for small-size electromagnetic flapping shutters for camera phones, low-inertia trapezoidal twin blades, each suspended by the low-stiffness H-type torsional springs, are employed. The electromagnetic flapping shutters used in this experimental study have steady-state rotational angles of $48.8{\pm}1.4^{\circ}$ and $64.4{\pm}1.0^{\circ}$ in the magentic fields of 0.15 T and 0.30 T, respectively, for an input current of 60 mA; the maximum overshoot angles are $80.2{\pm}3.5^{\circ}$ and $90.0{\pm}1.0^{\circ}$ in the magentic fields of 0.15 T and 0.30 T, respectively. The rising/settling times of the shutter while opening are 1.0 ms/20.0 ms, while those while closing are 1.7 ms/10.3 ms. Thus, we experimentally demonstrated that the smallsize (${\sim}8{\times}8{\times}2\;mm^3$), low-power (${\leq}60\;mA$), and high-speed (~1/370 s) electromagnetic flapping shutters are suitable for phone cameras.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.70-74
• /
• 1999

발전소 시뮬레이션 시스템 기술은 종합적인 지식을 바탕으로 자료수집 및 분석, 소프트웨어 개발 환경, 수학적 모델, 전산기 구성, 각종 계기류 설계 및 구매 장착 등의 노하우를 알아야만 제작할 수 있는 종합적인 기술이다. 또 지시기반의 기술이며 부가가치가 높은 기술이기 때문에 선진 각국에서는 계측제어 시스템의 기술개발 및 시장 확대를 위하여 힘을 쓰는 동시에 타국으로의 기술정보 유출을 경계하는데 신경을 곤두세우고 있다. 현재 복잡화되어 가고 있는 산업 사회의 전력 수요에 대한 대폭적인 증가 추세에 따라 발전소에서는 보다 효율적이며 합리적이고 경제적인 전력 공급을 위해서 전력 생산에 대한 신뢰성 향상 및 안정성 확보는 물론, 효율성 높은 운전이 절실히 요구되고 있다. 한편, 국내의 시뮬레이션 시스템 분야 기술은 아직도 완벽한 수준에는 미치지 못하며, 이 분야의 기술력 확보 및 신기술 개발은 향후 미래의 모든 시스템산업의 성쇄를 판가름하는 아주 중요한 척도가 될 것이다. 이 중에서 접지 분야는 고전압 혼촉에 의한 저압측 선로의 전압상승 방지, 모선(Bus)이나 전력 기기의 절연보호 및 회로전압의 안정등으로 시스템 성능을 한층 증가 시켜줄 뿐아니라 기기의 오동작이나 낙뇌등으로 인명피해 발생을 없애주는 아주 중요한 분야임에도 불구하고 이 분야의 국내 관련법규등이 미비한 사항이다. 그래서 발전소 분산제어 시스템분야의 장기간 신뢰성 및 안정성을 가지고 있고, 국내에서 많이 사용하는 미국 Bailey의 infi-90 및 독일 ABB의 Procontrol-P를 비교 분석하여 발전소 시뮬레이션 시스템의 접지에 응용 하고져 한다.상호 발생기를 이용한 다양한 시스템 검증 및 분석에 이용할 수 있을 것이다. 본 논문은 가상호 발생기의 구조와 최대 용량 시험 방법을 소개하고, 더 나아가 호 Traffic에 대한 최대 용량 시험뿐 아니라 QoS를 향상시키기 위한 교환 시스템의 제반 성능 시험 및 분석에 이를 이용하기 위해 개선이 필요함을 서술하고자 한다.textrm{m}$~3.4$\mu\textrm{m}$ 범위에서의 투과 및 흡수 스펙트럼을 측정하였다. 결정 성장 결과 B3+, Er3+, Cr3+ 이온은 Ti4+ 이온과 이온의 크기 차이가 심하여 결정의 정상적인 성장을 방해하는 물성을 나타냈고, V5+, Cr3+ 이온은 흑색의 결정, Fe3+ 이온은 적갈색의 결정으로 성장되었다. Al3+, Zr4+, Al3+의 순서로 투과도가 높아지는 것이 관찰되었다. 불순이온의 농도에 따른 영향으로서 Al3+ 이온의 경우 주입농도가 높아질수록 low angle boundary와 oxygen deficiency가 감소하였고, 투과율은 조금 감소하거나 큰 차이가 없는 것으로 나타났다. 반면에 Cr3+ 이온을 주입한 경우 0.003 atomic%에서 최적의 물성을 보였으며, 주입농도가 높아질수록 결정성장이 어려워지고 광의 투과도가 급격히 저하되었다.은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.1
• /
• pp.30-40
• /
• 1995

The relationship between dietary intake and vitamin/mineral supplement usage was examined in 706 adolescent girls who were high school students. 43.8% of subjects used vitamin/mineral supplements during one year. The higher the family income and parents education level, the higher percentage of vitamin/mineral supplement usage was. But there was no significant difference between grades and scores. And vitamin/mineral supplement usage was higher int he thin and obese groups than the average weight groups. Nutrition knowledge and food habit did not affect vitamin/mineral supplement usage. Calorie intakes of vitamin/mineral supplement users and nonusers were similar. However, independent of the supplements, the diets of supplement nonusers contained significantly more dietary protein, vitamin A, vitamin $B_2$, niacin, vitamin C, and calcium than the diets of the users. A considerable portion of both the users and nonusers had dietary intakes of less than 2/3 of the Recommended Dietary Allowances for vitamin $B_1$, vitamin $B_2$, niacin, calcium, and iron. Vitamin/mineral supplement nonusers generally consumed a more vitamin, mineral from diet. Reasons for taking supplements were to take energy, advice and illness.

• The Korean Journal of Community Living Science
• /
• v.16 no.4
• /
• pp.83-93
• /
• 2005

This study was conducted to provide information about the behavioral intentions to diet in adolescent females. To explain the behavior intention to diet, a conceptual framework based on the ' Social Support, Control and the Stress Process Model ' and the ' Theory of Reasoned Actio ' was used. The survey was carried out by self-questionnaires with 463 female high school and college students in Daegu. Analysis of data was done by using mean, correlation and multiple regression analysis with the SAS computer program. Subjects were divided into 3 groups-underweight, normal weight, and overweight-according to their current body size. The most powerful influencing factor related to perceived stress -that is dissatisfaction with body image- was the current figure, regardless of current body size. The fatter the current body size, the higher the score for the behavioral intention to diet. In attitude toward the behavior of dieting, the fatter the current figure, the higher the attitude score, and the belief of behavioral outcome was the main decision variable. For the score of the subjective norm, the overweight group was significantly higher than other groups. The influencing factors for the behavioral intention to diet were perceived stress and attitude toward dieting behavior, especially beliefs of behavioral outcome.