• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.81-92
• /
• 2000

The purpose of this study is to elucidate the characteristic of this study is of attitudinal variation of water quality for nine representative springs in the Halla mountain region. The evolutional processes of the spring water also have been studied. Results of hydrogeochemical analyses show that Gwaneumsa spring is very high in pH. The spring waters from Yungsil, Namguksunwon, Sungpanark Oremok and Gwaneumsa which springs situated lower than 1000m in altitude are relatively high concentrations in chloride, sulphate, nitrate nitrogen and sodium ions, indicating that they are affected by surrounding pollution sources. The concentrations of bicarbonate, sulphate and hydrogen ions in spring waters increase when the precipitation increases, whereas the concentrations of nitrate nitrogen, chloride and calcium ions decrease with increasing amounts of precipitation. The magnesium, sodium and electrical conductivity are nearly independent of the precipitation. The spring waters in the Halla mountain region belong to the groups of sodium or potassium type and bicarbonate type, except the Baegrogdam and Wiseorm spring water.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1399-1404
• /
• 2012

Because satellites operate in space, it is impossible to repair them when they malfunction. Therefore, to ensure the normal function of the payload used in the satellites, accurate assembly and installation of parts are crucial. To prevent abnormal functioning in the extreme environments during launch and in space, it is essential to test changes at the parts and system levels by performing alignment measurement before and after the launch environment test and the space environment test. Recently, noncontact three-dimensional precision machinery for medium- and large-sized parts has been developed. One of these is the theodolite measurement system, which is widely used in the aerospace industry. This study measures the angle of the dual thruster module that is used to control the attitude of KOMPSAT by using a theodolite, and alignment measurement and a reliability analysis are performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.31-36
• /
• 2018

Fuses are used to protect electric circuits or devices from excess current. Glass-tube fuses are typically used, but problems have arisen due to the mandated switch from conventional solder to lead-free solder. This study used CFD to simulate the phenomenon of molten solder being poured out of a fuse during the soldering process for a fuse cap and fuse element. In addition, a method is proposed to prevent solder from overflowing, and its effectiveness was verified based on the analysis results. The results show that a sufficient increase of the temperature inside the glass tube before soldering and gravity can help to prevent the solder from overflowing.

• The Journal of the Korea Contents Association
• /
• v.7 no.5
• /
• pp.166-173
• /
• 2007

This study analyzed the valuation of stock market for marketability of mobile contents. We investigated, during the period of 2002 to 2005, the anormal returns of each firms which announced the launching of new mobile contents. As a result, we found statistically significant average abnormal return(AAR) at launching day of new mobile contents. And the meaningful average cumulative abnormal returns(ACAR) are observed during event period. Which means that the launching announcement of new mobile contents leads to statistically significant positive abnormal returns at stock market. Therefore, we concluded that stock market react immediately to new mobile contents, and which valuate only specific value but also implied value of contents.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.5
• /
• pp.21-28
• /
• 2009

This experimental study was performed to find the important design parameters and the starting characteristics of a supersonic exhaust diffuser. The experimental study was carried out on a scaled down model of straight cylindrical supersonic exhaust diffuser, in order to evaluate the effects of operating fluid(air, nitrogen), the diffuser inlet area over the primary nozzle throat area($A_d/A_t$), the inlet pressure of primary nozzle, diffuser length over diffuser inner diameter($L_d/D_d$) and existence or nonexistence of diffuser divergence. The test results showed that the starting pressure increased with decrease in diameter of primary nozzle, and the measured starting pressure of the diffuser had approximately 90~98% efficiency as compared with the predicted starting pressure. Also, the diffuser was started at all case, regardless of $L_d/D_d$ (above 8.4) and diffuser divergence. The result of this study can be used as an essential database for developing a simulated high-altitude facility for real-scale model.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.457-469
• /
• 2010

The government real estate policy has repeatedly relaxed and reinforced controls under the mutually contradictory targets. Switching over the supporting policy after the IMF crisis to the regulating policy from 2003, the government housing policy began to generate ill effects due to various regulations. This stud carefully investigates and statistically tests the transmissions of variations in the housing prices between the metropolitan areas in the early stage of the preceding administration, under the effect of the supporting scheme, and those in the late stage, under the effect of the restricting scheme. The distinctive feature between the two periods is found to be much simplified interrelationships of the price variations in the latter period. Consolidated leading role of capital sphere, by concentrated economic strength, suggest the obvious imbalance between variations in the metropolis housing prices.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1373-1377
• /
• 2008

강우-유출에 의해 성층화된 저수지로 유입하는 하천수는 저수지 표층에 비해 낮은 수온과 높은 부유물질(SS) 농도를 가지므로 저수지 표층수보다 상대적으로 높은 밀도를 유지한다. 하천으로부터 유입한 밀도류는 유속에 의한 관성력이 두 수체의 밀도차에 의한 음의 부력보다 큰 구간까지는 저수지 표층을 따라 진행하지만, 두 힘이 같아지는 지점에서 밀도류는 더 이상 진행하지 못하고 저수지 수면 아래로 침강하며 이 과정에서 수체간의 많은 혼합이 일어난다. 따라서 홍수시 유입한 탁수의 침강점에 대한 정확한 예측은 수질관리를 위한 현장조사, 그리고 탁수거동 해석 및 최적관리대책 마련에 중요한 요소이다. 본 연구의 목적은 홍수시 대청호로 유입하는 하천 밀도류의 침강위치를 홍수규모별로 경험식과 수치모델을 통해 산정함으로써 두 방법 간의 장 단점을 비교하고, 탁수 현장조사와 최적관리를 위한 기초정보를 제공하는데 있다. 유입수의 모의조건은 그 동안 대청호에서 발생한 홍수 크기를 기준으로 9개의 등급으로 나누었으며, 저수지 성층조건은 여름철 탁수가 유입되기 전의 발달된 성층구조를 적용하였다. 유입수와 저수지 성층구조의 특성치는 밀도 Froude 수($Fr_i$)로 나타냈으며, $Fr_i$ 조건별로 침강점 위치를 저수지 단면을 삼각형태로 가정한 Hebbert et al.(1979) 경험식과 2차원 수치모델로 산정하여 그 결과를 비교하였다. 대청호로 유입한 탁수는 홍수규모에 따라 대정리 수역에서 회남수역 사이 구간에서 침강하였으며, $Fr_i$ 값이 클수록 침강점 수심이 깊어지는 경향을 보였다. 경험식으로 산정한 침강점 수심은 정상상태 조건을 가정하므로 홍수에 의한 수위변화를 고려하지 못하며, 실제의 불규칙한 하상표고를 일정한 하상경사로 가정하기 때문에 2차원 모델의 결과보다 과대산정하는 경향을 보였다. 따라서 홍수가 연속해서 발생하며 수위변화가 심한 국내 저수지 여건에서 하천 유입 밀도류의 거동을 보다 정확히 예측하기 위해서는 2차원 또는 3차원 수치모델을 적용하는 것이 타당할 것으로 판단된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.21-30
• /
• 2000

Numerical design optimization techniques are implemented for the improvement of the ram accelerator performance. The design object is to find the minimum ram tube length required to accelerate projectile from initial velocity $V_o$ to target velocity $V_e$. The premixture is composed of $H_2$, $O_2$, $N_2$ and the mole numbers of these species are selected as design variables. The objective function and the constraints are linearized during the optimization process and gradient-based Simplex method and SLP(Sequential Linear Programming) have been employed. With the assumption of two dimensional inviscid flow for internal flow field, the analyses of the nonequilibrium chemical reactions for 8 steps 7 species have been performed. To determined the tube length, ram tube internal flow field is assumed to be in a quasi-steady state and the flow velocity is divided into several subregions with equal interval. Hence the thrust coefficients and accelerations for corresponding subregions are obtained and integrated for the whole velocity region. With the proposed design optimization techniques, the total ram tube length had been reduced 19% within 7 design iterations. This optimization procedure can be directly applied to the multi-stage, multi-premixture ram accelerator design optimization problems.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.23-31
• /
• 2012

The purpose of this study is to analyze earth pressure acting on a circular shaft-tunnel considering arching effect by centrifuge modeling test on sands. The centrifuge testing method provides a way to model an in-situ stress state condition with a stress gradient within a laboratory specimen. A small-scale model of circular shaft-tunnel, which has a real diameter of 6.0 m and height of 15.0 m, was designed and tested twice under 75g-level. Additionally, an effect of excavation was presented by separating two segments of circular shaft wall to find behavioral properties and strength of earth pressure along with excavating ground. The test results were compared with those of the proposed earth pressure equation. The test results showed that earth pressure decreased by about 70% in comparison with existing two-dimensional earth pressure. This fact might be attributed to three-dimensional arching effects.

• Physical Therapy Korea
• /
• v.10 no.4
• /
• pp.43-59
• /
• 2003

보행 종료(gait termination)는 인간의 보행개시(gait initiation)나 율동성 보행(rhythmical walking)에 비해 관심을 적게 받고 있다. 파킨슨 환자들이 보행종료와 방향전환 시 가지는 어려움은 이들 환자들이 보행 시 넘어지게 되는 노출 요인으로 보고되어져 왔다. 보행종료에 대한 기전의 이해는 효과적으로 걸음을 멈추지 못해 넘어지게 되는 위험요인을 가진 사람들에게 적용되어질 수 있다. 이 논문에서 우리는 보행종료에 대한 최근문헌을 고찰하고 우리 실험실에서 진행되어온 파킨슨환자의 보행종료에 관한 일련의 실험들의 결과를 요약하였다. 본 연구는 율동적인 보행상태에서 완전한 멈춤으로의 전환에서 일어나는 동역학의 변화를 검사하기위해 시행되었다. 보행속도가 증가함에 따라 따르는 다리(trailing limb; 보행종료시점에서 뒤에 위치하는 다리)의 유의한 가속력 감소가 나타나고 멈출 때 이끄는 다리(leading limb; 보행종료시점에서 앞에 위치한 다리)에서 유의한 감속력의 증가가 나타난다. 보행종료 시, 이끄는 다리의 뒤쪽에 질량중심(center of mass) 을 유지시키기 위해 하지 신전근의 활성도가 오래 지속되어져야 한다. 예측하지 못한 상황에서 보행종료 시, 보행 중이나 예측되어진 상황에서 멈출 때보다 이끄는 다리 아래에서 감속력이 빠르게 발생하는 경향을 보였다. 대상자들을 보행속도에 따라 두 군으로 나눌 때, 계획되지 않은 보행종료를 하는 동안 보행속도가 느린 군이 빠른 군보다 전방 가속력을 급속하게 증가시키는 것으로 나타났다. 이러한 결과들은 보행속도가 느린 대상자들이 따르는 다리로 힘을 생성하기 보다는 주로 이끄는 다리에 의존하여 보행종료를 하는 것을 보여준다. 따르는 다리에서 발생되는 힘과 근육활성도의 조절을 측정하기 위하여, 파킨슨 환자와 연령에 의해 짝짓기된 정상 환자군에게 표적 조건(target condition)을 추가하였다. 파킨슨 환자군은 표적에 다리를 정확히 놓기 위해 몇 발자국 전부터 보행 속도를 줄였다. 파킨슨 환자들은 보행종료를 촉진하기 위해 필요한 근육들의 활성도를 증가시키는데 큰 어려움을 가지고 있다고 생각되어진다.