• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.910-932
• /
• 1996

A problem of determining the effective conductivity of a useful model of sphere-matrix type, disordered three-phase composite media is considered. Specifically, a three-phase media in which two-phase composite spheres, consisting of spheres of conductivity $k_2$((phase 2) and concentric shells of conductivity $k_3$(phase 3), are randomly distributed in a matrix of conductivity $k_1$( (phase 1) is considered. As for the structure models configuring three-phase composite media, three different structure models of PCS, PS-1 and PS-2 models are defined, which are analogous to well-established PCS, PS structure models of two-phase composite media. Futhermore, a generalized PS-PCS structure model is proposed to incorporate thesee three different models in one. Effective condectivity $k^{\ast}$of multiphaes composite media is greatly influenced by the phase connectivity of each disspersed phase material, as well as phase conductivities and phase volume fractions. Phase connectivity of three-phase PCS, PS-1, PS-2 composite media is quantified by the impentrability parameter $\lambda$. Mathematically rigorous first-order cluster bounds on $k^{\ast}$ are derived for these models of three-phase composite media, and as computation examples, first-order cluster bounds on $k^{\ast}$ for three-phase composites consisting of largely different phase conductivities are computed and compared as function of concnectivity parpmeter $\lambda$. Results and discussions are given.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.154-161
• /
• 1984

A modified technique of the transient hot wire method to measure the thermal conductivity of fluid has been described in this paper. The thermal conductivity of fluid can be obtained by acquiring wire temperature as a function of time. Multiplication of the inverse slope of the temperature versus logarithm of time by an instrumental constant gives the thermal conductivity. The constant voltage was applied to Wheatstone bridge circuit. The wire temperature can be measured as a function of time precisely with the aid of the data acquisition system composed of a microprocessor and an analog-digital converter. The thermal conductivity of the electrically conducting fluid has been measured with the insulated hot wire coated by electrically non-conducting material. The effect of the coated insulation layer on the thermal conductivity has been examined, in which it is confirmed that the thermal conductivity of electrically conducting liquid can be determined by the transient coated hot wire method. Thermal conductivities of methanol, carbontetrachrolide, Freon-22 and glycerin have been measured at room temperature in the pressure from 0.1MPa to 35.1MPa. The experiment has been performed to compare the data from the bare and the coated wires, and the results are satisfactory.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.411-417
• /
• 2009

The thermo-flow field in road tunnel is influenced by some facts such as piston effect of vehicle's move, operation of ventilation facilities, natural wind and buoyancy effect of fire plume. Among those, piston effect is one of primary causes for formation of air flow in road tunnel and has an effect on initial direction of smoke flow in tunnel fire. In this study to analyze the unsteady flow in the tunnel caused by the run of vehicle, the experimental study of vehicle-induced unsteady flow on a reduced-scale model tunnel is presented. While the three types of vehicle shape such as basic type of rectangular shape, diamond-head type and stair-tail type are changed, the pressure and air velocity variations with time are measured. The rising ratio of pressure and velocity are in order of "basic type of rectangular shape > stair-tail type > diamond-head type". The experimental results would be good data for development of a numerical method on the vehicle-induced unsteady tunnel flow.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.305-309
• /
• 2009

This paper operate with variable line impedance equipment consist of resister and reactor, when connect to 3phase induce motor present solve problem appear grid interconnection before/after about voltage transient of pv inverter through test and analysis solve problem.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.867-868
• /
• 2011

Transient Analysis on heat transfer of rocket engine combustion chamber and wall temperature variation was carried out, especially, calculations of LOx/kerosene rocket engine with/without fuel film-cooling were conducted. Convective and radiative heat flux inside combustion chamber wall were calculated by the empirical equations for rocket engine combustion, and conduction of wall interior was calculated by numerical method with 2D axisymmetric grid. In this calculations the transient variations of wall temperature, the location changes of peak temperature and so on affected by film-cooling were analyzed.

• Journal of computational fluids engineering
• /
• v.4 no.2
• /
• pp.17-30
• /
• 1999

The unsteady transitional boundary layer due to rotor-stator interaction was studied at two operation points, the design and one off design points. The off design point leads to lower blade loading and lower Reynolds number. A Navier-Stokes code developed in the previous study was parallelized to expedite computations. A low Reynolds number turbulence model was used to close the momentum equations. All computations show good agreement with experimental data. The wake induced transitional strip on the suction side of the stator is clearly captured at design point operation. There is no noticeable change in shape and phase angle of the wake induced strip even in the laminar sublayer. The wake induced transitional strip at off design point shows more complex structure. The wake induced transitional strip is observed only in the turbulent layer, and becomes obscure in the laminar sublayer and buffer layer. This behavior is probably consequent upon that the transition is governed by both wake induced strip and natural transition mechanism by Tollmien-Schlichting wave.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.411-414
• /
• 2010

In supersonic propulsion system, the inlet buzz phenomenon in the subcritical operation arises large pressure oscillation, combustion instability, and thrust loss, etc. Inlet Buzz phenomenon and the spray injection/combustion are figured out by the unified unsteady numerical analysis. TAB(Taylor Analogy Breakup) model was applied. Acoustic mode of the entire engine was investigated by detail analysis of pressure fluctuation at each location of the engine.

• The Korean Journal of Zoology
• /
• v.35 no.3
• /
• pp.372-382
• /
• 1992

당뇨병유발제인 streptozotocin이 생쥐 신장 사구체곁세포의 미세구조에 어떠한 영향을 미치는 지를 알아보고자 일반계통인 ICR생쥐와 유전성 당뇨병계통인 KK생쥐에 streptozotocin을 투여하여 경시적으로 각 동물의 신장 사구체곁세포의 미세구조의 변화를 관찰하였다. Streptozotocin을 투여한 ICR생쥐의 사구체곁세포는 3일째부터 과립형질내세망의 미약한 팽창과 과립내에 대소 공포의 출현 및 용해소체가 간혹 관찰되었다. 그후 시간이 지남에 따라 더욱 심하여 특히 2주 및 4주에서는 과립형질내세망의 팽창, 사립체, 골지장치 및 리보소곤 등이 소수 출현하였는데 비해 대소 용해소체는 많이 관찰되었으며 심한 탈과립으로 인해 세포질내 과립의 면적이 현저히 감소되었다. 그러나 KK생쥐의 실험군에서는 전 실험군에 걸쳐 퇴행성변화가 적었으며 ICR 생쥐 실험군에 비해 그 영향이 훨씬 적었다. 이상의 결과를 종합하여 보면 정상 ICR생쥐에 streptozotocin을 투여하자 되면 ICR생쥐 사구체곁세포에서 과립의 유의한 감소 및 세포내 미세구조의 퇴행성변화가 뚜렷한데 비해 KK생쥐 실험군에서는 ICR생쥐 실험군에 비해 손상을 적게 받았는데 이는 KK생쥐가 갖고 있는 당뇨병에 대한 내성에 의해 영향을 적게 미치는 것이 아닌가 추측된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2582-2589
• /
• 1993

Transient heat transfer characteristics of cooling of a spherical body were investigated in the radiatively active spherical medium. Initially the spherical body and the medium were maintained at their constant temperatures. Then heat transfer begins from spherical body t medium. The heat transfer mode inside the spherical body is just conduction. But heat is transferred by both conduction and radiation inside the medium. All thermodynamic properties were held constant in time. Spherical symmetry is assumed. DOM was adopted to solve RTE. The effect of characteries-tic optical thickness, conduction to radiation parameters, and solid surface emissivity has been studied.