• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.760-761
• /
• 2015

기어는 회전 기계 사이의 동력 전달을 위한 장치이며 현재 산업 전반의 통상적인 기어는 기계적 기어가 주류로서 형성되어 있다. 하지만 기계적 기어는 맞물린 톱니바퀴의 물리적 접촉에 의해 접촉 경계면의 마모 및 파손, 소음과 진동의 문제가 있으며 유지보수 비용 또한 크다. 따라서 최근 물리적 접촉이 없어 기계적 기어의 많은 문제를 해결할 수 있는 마그네틱 기어 (Magnetic Gear)에 대한 관심이 높아지고 있다. 마그네틱 기어는 영구자석에서 생성된 자계를 이용하여 비접촉 동력전달이 가능하며, 마찰손실 제거, 유지보수의 용이성, 매우 적은 소음 및 진동 등의 장점을 가지고 있다. 본 논문에서는 이러한 마그네틱 기어의 토크전달 방법과 형상변화에 따른 전달토크 특성을 2-D 유한요소해석법을 이용하여 해석하고 분석하고자 한다.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.549-557
• /
• 1997

This study was designed to investigate the attrition pattern in Angle Class III malocclusion with facial asymmetry. The sample consisted of three groups, the 20 subjects of normal occlusion group(Group I), the 12 subjects of class III malocclusion without facial asymmetry group(Group II) and 17 subjects of Class III malocclusion with facial asymmetry group(Group III). Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date processing. Attrition areas from canine to second molar on both sides in upper and lower arch, totally twenty, was marked by pencil and mesured by computer system(INTERGRAPH CO. USA) 2 times and the average value was used for date Processing. All attrition areas were measured 2 times and the average value was used for data processing The data were statistically analyzed by SAS program. The results of this study were as follows. 1. Total attrition area in Group I was larger than in Group II and III. 2. There was no significant difference in attrition area between right and left side in each group, but attrition area in Group III was larger than in Group I and II. 3. In Group I, Maxillary attrition area was larger than mandibular attrition area, but in Group ll and III, there was no significant difference in attrition area between maxilla and mandible. 4. In Group III, the attrition area of deviated side was target than undeviated side 5. There was no significant difference in attrition area between chewing side and non-chewing side in each group. 6. The total attrition area was unaffected by gender.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.366-371
• /
• 2007

무선 센서 네트워크는 경제적, 환경적 목적으로 다양한 방면에서 활용되고 있다 이 때, 배치된 각 센서의 위치를 파악하는 것은 센서 네트워크에서 가장 기본적이며 가장 중요한 문제 중의 하나이다. 기존 논문에서 제안된 센서 위치 측정 방법은 특별한 장비를 장착하거나 특정한 환경의 지역에 한정시킨 방범으로 제한하고 있는 경우가 대부분이다. 하지만 어떠한 관심 지역의 환경은 언제라도 바뀔 수 있다. 또한, 센서가 위치할 환경의 기온, 풍속 등을 미리 안다는 것은 비현실적인 가정이다. 더구나 각각의 센서에 특별한 장비를 장착한다는 것은 비용 절감을 이유로 센서 네트워크를 운영하는 경우 오히려 그것을 이용하지 않는 경우보다 비용이 더 들 수도 있다. 이에 본 논문에서는 센서 노드의 기본적인 통신 기능은 이용하여, 환경에 순응적으로 센서의 위치를 측정할 수 있는 방법을 제안하고자 한다. 센서 노드에서 기본적으로 제공하는 통신 기능은 RF 전파를 보낼 때 전송 레벨을 달리하여 보낼 수 있다. 이러한 기본적인 기능을 이용하여 위치를 측정하게 되면 전체적인 센서 네트워크의 비용이 절감될 뿐만 아니라 환경에 순응적인 위치 측정이 가능하게 된다. 또한, 각 노드의 위치가 정해진 후 다른 노드와 통신할 때 전파의 세기를 조정함으로써 RF 통신에서 소모되는 전력량을 줄일 수 있다. 따라서 본 논문에서 제안하는 전송 레벨을 이용한 위치 측정 방법은 단순히 위치를 측정한다는 의미뿐 아니라 환경에 순응적으로 작동한다는 장점이 있다. 향후 네트워크 내에서 통신에 소비되는 전력을 줄일 수 있다는 점에서도 중요한 의미를 지닌다.를 집행하는 caspase의 활성 형태인 cleaved caspase-8, -9, -7, -3의 단백질 수준이 목향 헥산추출물의 처리에 의해 증가하였고 caspase-3의 표적 단백질 중 하나인 PARP의 불활성 형태인 cleaved PARP의 단백질 수준도 현저하게 증가하였다. 이 결과들은 목향 헥산 추출물이 LNCaP 세포의 apoptosis를 유도함으로써 전립선 암세포의 증식을 억제함을 보여주는 것이며 목향 헥산추출물에 의한 apoptosis 유도는 caspase 활성 증가와 Bak 및 t-Bid 단백질의 증가에 의한 것임을 제시한다. 따라서 앞으로 항암효과를 나타내는 성분의 동정 및 동물실험을 통하여 좀 더 면밀한 기전 연구가 수행된다면 목향 헥산추출물은 화학적 암예방 물질이나 치료제로 개발될 수 있을 것으로 사료된다.적 분해층과 마모질이가 가장 깊은 것으로 나타났으며 flowable type의 복합레진과 컴포머는 표면 경도와 마모도에서 양호한 결과를 보였다. 이상의 결과 복합레진과 컴포머의 평가요소로서 마모도와 함께 가수분해도 고려되어야 할 것으로 사료된다.증후군 환자에서 대조군에 비해 높은 비율을 보였다.er thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.305-309
• /
• 2009

Dens evaginatus is a dental anomaly most commonly seen in premolar teeth in which a tubercle or protuberance projects from either the center of the occlusal surface or the buccal triangular ridge. These tubercles are easily fractured from mastication as the tooth erupts and frequently leads to pulp necrosis as a common complication. To prevent these sequelae, prophylactic treatment soon after the tooth starts erupting is essential. These preventive treatments include, selective grinding and protection of the tubercle by pit and fissure sealant. When the tooth does shows signs of pulp necrosis and apical periodontitis, endodontic procedures are needed. Apexification and apexogenesis are usually the treatment of choice for the affected teeth which have immature apices. Apexogenesis is a vital pulp therapy procedure performed to encourage continued physiological development and formation of the root end. It involves removal of the inflamed pulp and the placement of calcium hydroxide on the remaining healthy pulp tissue. This case report describes an atypical apexogenesis of a mandibular premolar which showed to be a dens evaginatus. The tooth which was treated with calcium hydroxide shows good results and is planned for permanent root canal filling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.563-572
• /
• 2001

A conventional motor in a crane has a taco generator to feed back the number of turns to a main controller. The taco generator is contacted to a motor shaft through the coupling. Errors in a crane have often occurred because the coupling has worn out while the motor is turning. In this paper, we design the device of the frequency to voltage transducer in a motor. The device is composed of a rotary encoder, a speed measurement using PIC16F84 controller, a display, and a direction-decision block. The rotation of a motor is recognized by the rotary encoder and microcontroller counts the number of turns of a motor. The emergency signal is generated if the frequency goes over or below the speed limit of a motor. And the device can acknowledge the rotation direction of the motor after 6。 rotation. The simulation results and the test for a implemented device have shown that the transducer of a frequency to a voltage can replace a taco generator in a crane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.697-704
• /
• 2017

This study was carried out to investigate and alleviate the vibration problem of commercial high-speed trains. First, the measurement of the carbody vibration was performed, in order to determine the vibration level of the high-speed train. The measurement result showed that the vibration level of the driver cab was higher than that of the passenger car and that the vibration became bigger toward the trailing end of the train. The vertical vibration of the driver cab and passenger car was larger than the transverse vibration, and the maximum value of the vibration in the ballast section was larger than that in the concrete section. A dynamic analysis was carried out to improve the vibration of the KTX-Sancheon train. The results of the analysis showed that it is necessary to reduce the vibration of the driver cab and both ends of the passenger cars. To reduce the vibration of the driver cab, it was recommended that the stiffness of the secondary coil spring be reduced and the damping coefficient of the secondary vertical damper be increased. It was found that the failure of the suspension system could be the origin of the vibration problem of the high-speed train. The proper management of wheel wear plays an important role in the improvement of the operation efficiency and reduction of the carbody vibration of high-speed trains, and research is underway to change the present wheel profile to increase the mileage between wheel turning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.339-345
• /
• 2008

The heat exchanger tube in nuclear power plants is mainly fabricated from nonferromagnetic material such as a copper, titanium, and inconel alloy, but the moisture separator & reheater tube in the turbine system is fabricated from ferromagnetic material such as a carbon steel or ferrite stainless steel which has a good mechanical properties in harsh environments of high pressure and temperature. Especially, the moisture separator & reheater tubes, which use steam as a heat transfer media, typically employ a tubing with integral fins to furnish higher heat transfer rates. The ferromagnetic tube typically shows superior properties in high pressure and temperature environments than a nonferromagnetic material, but can make a trouble during the normal operation of power plants because the ferrous tube has service-induced damage forms including a steam cutting, erosion, mechanical wear, stress corrosion cracking, etc. Therefore, nondestructive examination is periodically performed to evaluate the tube integrity. Now, the remote field testing(RFT) technique is one of the solution for examination of ferromagnetic tube because the conventional eddy current technique typically can not be applied to ferromagnetic tube such as a ferrite stainless steel due to the high electrical permeability of ferrous tube. In this study, we have designed RFT probes, calibration standards, artificial flaw specimen, and probe pusher-puller necessary for field application, and have successfully carry out RFT examination of the moisture separator & reheater tube of nuclear power plants.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.480-493
• /
• 2007

Many railway-advanced countries are using the various types of track to reduce the track maintenance and repair cost according to the improvement of velocity. It spends on much maintenance and repair cost for ballast track due to abrasion of ballast, track irregularity and unisotropical ballast-support stiffness. The ballast track on railway bridge is accelerating the deterioration of ballast according to interaction of railway bridge and track. As continuing the deterioration, it is caused dynamic loads. Due to these effects, it increases negative loads of track and bridge. However, when designing the railway bridge, the effect of ballast track was applicate only dead load, so elastic behavior effect of ballast track is not influenced. Therefore, this paper presumes the stiffness of ballast track on railway bridge considering dynamic behavior of railway bridge, it was evaluated that effect on dynamic behaviors of railway bridge according to ballast track stiffness.