• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2541-2544
• /
• 2003

새로운 원리에 의한 원격 거리 및 각도측정 시스템［1］［2］(이하 TS, Total Station)을 개발하였다. 본 시스템은 마이크로 터널링 공법의 굴진기의 후미 또는 임의의 기준점에 원격으로 점멸할 수 있는 십자형의 발광체를 부착하고, 추진관에 고정시킨 상하좌우 각도측정 및 비접촉식 레이저 거리측정기가 부착된 무인 원격 제어장치에 의하여 십자형 발광체의 중심을 자동으로 검출한다. 또한. 회전각과 CCD 라인 스캔 센서의 조합에 의하여 각도를 정밀하게 원격 측정하게 된다. 한편 본 시스템을 이용하면 마이크로 터널링 공법에 의한 추진관내의 측정 가능한 범위를 연결하는 위치에 복수의 TS를 배치하여 서로의 위치를 자동으로 계측하고 그들 데이터를 컴퓨터에 의하여 계산함으로써, 맨홀의 임의의 기준점으로부터 굴진기의 현재 좌표를 신속하고 정확하게 계산할 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.119-126
• /
• 2004

Permanent magnetic gears are magneto-mechanical devices that are widely used to replace the ordinary mechanical gear and to transmit torque without the mechanical contact. This study investigates the characteristics of touch free permanent magnetic gear according to the employing systems. The effect of the magnetic torque is analyzed by using 3 dimensional Finite Element Method (FEM). To estimate the transmission torque of FEM model, the numerical results are compared with the experimental results. The influences of geometry size, magnet number on transmission torque are obtained. As results of this paper, it is confirmed that the transmission torque behavior is associated with the configuration of the magnet numbers and the air gap between the two permanent magnetic gears.

• 전기의세계
• /
• v.39 no.12
• /
• pp.21-32
• /
• 1990

퍼지 논리를 이용한 제어시스템에 관하여 핵심 개념을 중심으로 기술하고자 한다. 요약컨데 이 퍼지제어기의 특징은 1) Parallel(distributed) control 2) logic control 3) linguistic control등이며 퍼지 제어가 효과적일 수 있는 제어대상(plant)로서는 수학적 모델을 적용하기 힘든 시스템으로서 경험적으로 또는 수동적인 방법으로 제어가 잘되고 있는 대상을 들 수 있다. 그 뿐만 아니라 간단한 제어기가 필요한 경우로서 보다 효과적인 제어측 Software를 쓰거나 센서 또는 필터없이 사용가능하고, Inverted Penedulum의 자세 제어처럼 정확성보다는 속도 응답 제어가 요구되는 경우 등에 효과적으로 쓸 수 있는 것으로 알려지고 있다. Fuzzy 제어는 지식 베이스의 규모에서 인공지능형 Expert System보다 Compact하고 선형.비선형 플랜트에 공히 이용될 수 있으며, 설계자는 오퍼레이터와의 접촉을 통해 룰을 구축하므로 사용자가 시스템을 이해하기 쉬운 잇점등이 있기도 한다. 그러나 가장 큰 문제는 구축해 놓은 시스템의 안전성(Stability)를 이론적으로 사전에 검증하기가 어렵고, 같은 제어대상이라 할지라도 추론방법, 소속함수의 형태선택, 룰수 등에 따라 제어성능이 바뀔수 있으나, 무엇이 어떤 영향을 주는지 규명되지 않은점 등 여러가지 연구되어야 할 내용이 많이 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.407-410
• /
• 1995

Many researches on measurement technology has been made and developed by various methods. Considering the measurement environment with cutting fluid, coolant and the like, contact type measurement methods are mostly used. But contact measurement method has measuring force and so the sensing head becomes worn. By these reasons, we considered sensors not influenced by the former fluid and so can acquire accrate measured values using error compensation due to temperature and vibration. For this purpose, eddy current sensors and Extended kalman Filter Algorithm for processing measured data has been used. In this paper, we present new technology that can be used for measuring workpiece with previous bad environment using direct method and comparison measurement method. We used cylindrical workpieces which were produced by grinding machine for the target.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.768-771
• /
• 2001

Non-contacting capacitive sensor, based on principle of the cross capacitor, for measuring of $\mu\textrm{m}$-order displacements have been fabricated and characterized. To overcome disadvantages of the existed capacitive sensors of parallel type with 2-electrodes and 3-electrodes, the developed new sensor was designed to have 4-electrodes, two of them used high and low electrode the other two used as guard electrodes, on a sapphire plate with diameter 17 mm and thickness 0.7 mm, and are symmetrically situated with a constant gap of 0.2 mm between the electrodes. This sensor can be used for measuring the distance between sensor and target not only the metallic but also non-metallic target without ground connection.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.443-448
• /
• 2006

Non-contacting capacitive sensor based on Thompson-Lampard theorem have been fabricated and characterized for measuring of 때 order displacements. To overcome disadvantages of the existed capacitive sensors of parallel plate type with 2-electrodes and 3-electrodes, the developed new sensor was designed to have 4-electrodes with a constant gap of 0.2mm between the electrodes. Two of the electrodes were used as a high potential electrode and a low one, the other two electrodes were used as guard electrodes. These electrodes were made from copper using RF sputtering system on a sapphire plate with diameter 17 mm and thickness 0.7 mm. This sensor can be used for measuring the distance not only between the sensor and metallic target connected to ground potential but also non-metallic target without ground connection.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.204-205
• /
• 2000

본 연구에서는 반도체 레이저 LD 혹은 백색광로부터 조사되는 빔을 CRT 모니터의 측정부에 입사시켜 패널 glass와 섀도우 마스크에서 반사되는 빔을 PSD에 조사하여 섀도우 마스크의 진동을 측정하였으며, CCD를 사용하여 열적변형과 패널 glass의 아랫면과 섀도우 마스크사이의 간격 Q값을 측정하였다. 사용한 PSD는 검출 영역은 12mm, 센서의 위치분해능은 0.2$mu extrm{m}$이며, 실시간적으로 처리할 수 있는 장점을 갖고 있다. CRT의 경우 전자빔의 충돌에 의한 섀도우 마스크의 열적 변형과 진동에 의한 섀도우 마스크의 떨림이 발생하여 화질이 저하된다. Q값의 정확한 계측과 섀도우 마스크의 열적변형 및 진동의 측정을 통하여 이들 현상이 발생되는 근본적인 취약구조를 발견함으로써 우수한 섀도우 마스크를 설계하고 제품의 성능을 향상시킬 수 있다. (중략)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.93-98
• /
• 1999

Non-contacting capacitive sensors, based on principle of the cross capacitor, for measuring small displacement less than 1.95$\pm$0.5 mm have been fabricated and characterized. To overcome disadvantages of the existed capacitive sensors, the new sensor is consisted of 4-electrodes which are formed 2 active electrodes and 2 guard electrodes on a sapphire plate with diameter 17mm and thickness 0.7 mm, and are symmetrically situated with constant gap of 0.2 mm among the electrodes. The sensor is evaluated to be correlation coefficient of 0.9987 for the range of 1.95$\pm$0.5 mm and that of 0.9995 for 1.95$\pm$0.25 mm range. This sensor can be used for in situ measurements in the mechanical mirror polishing with precision less than $\pm$1${\mu}{\textrm}{m}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.9-9
• /
• 2000

Accurate counting and packaging pills is one of the most fundamental works of the pharmaceutical industry. But it is so labor consuming and very hard to be automated. As the pharmaceutical industry is growing bigger, the need of counting and packaging automation is increasing to obtain effective mass production. Precise and quick sensing is required in the counting and processing of quickly dropping pills to improve the productivity. There are many trials for this automation and automatic machine. But the performance of the existing counting machine varies with the size, shape and the dispersion degree of pills In this research, authors design the counting and packing machine of medicinal pills that is more accurate and highly trustworthy After getting analog signal from optical sensor, pill passage is discriminated from chosen characteristic feature using microprocessor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.214-214
• /
• 2000

This paper deals with the non contact optical sensor to measure the shape of transparent plates such as glass panel of LCD(Liquid Crystal Display). The conventional methods to obtain the shape or thickness of a transparent plates are contact type sensor such as LVOT(Linear Variable Differential Transformer). Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition, the high temperature glass casting makes the size of sensor body changed. These reasons makes the sensor degraded. In this paper, to overcome these problem, we proposed a low cost noncontact optical sensor this is composed of the Hologram laser unit of a CD-Pickup and a plastic lens. To evaluate the performance of the proposed optical sensor, a series of experiments were performed for various measurement condition. Based upon observation of the experimental result, the developed sensor shows good result for measuring the shape of transparent plates.