• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.994-999
• /
• 2011

This paper explains how existing electrical ADU(Antenna Distribution Unit) has been improved into a mechanical ADU. Generally the mechanical ADU has stabilized Glide Path which provides a RF signal to the aircraft for safe landing and it has solved the issue of phase shift and power distribution ratio change which can be occurred during long-term use. Besides it has been certified by Flight check and operating several airports in oversea as well as in korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3546-3552
• /
• 2009

In this study, an analysis code was created for a 190*650*25-mm (W*H*D) parallel-flow evaporator, and research was done on how to increase the heat transfer rate of aluminum PF heat exchanger for application in IDU. After varying the R410A refrigerant up-down flow to two and three passes and the distribution ratio to 1:1:1 and 1:2:2, it was determined that the two-pass flow has a 30% higher partial heat transfer rate and a 25% lower heat transfer coefficient compared to the three-pass flow. As for the distribution ratios of the three-pass flow, 1:1:1 was found to have a lower refrigerant pressure loss than 1:2:2 distribution. It was assumed, though, that the refrigerant distribution had a uniform flow and that its value was thus overestimated in the actual case of maldistribution in each pass.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.514-519
• /
• 2003

치수효과는 콘크리트나 암석과 같은 quasi-brittle 재료들의 물리적 특성에 영향을 미친다. 모든 재료의 경우에 체적이 크면 흠이 클 수 있다. 구조물의 섬유 묶음 크기가 증가하면, 섬 유 강도가 감소하는 현상을 흔히 경험해 왔다. 복합재료내의 강도 분배와 치수사이의 관계를 특성 짓는 효과적인 방법은 아직 완전하지 않다. 본 논문에서는 경험에서 얻어진 Filament Wound 튜브에 사용되는 유리 섬유와 에폭시의 인장강도 감소비율 실험데이터로 얻은 그래프로부터 Crasto와 Kim의 일방향 보강된 AS4/3501-6복합재료의 90$^{\circ}$방향 인장강도에 대한 실험결과로부터 복합재료 봉구조재의 강도 치수효과를 증명하였다.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.179-181
• /
• 2006

톨게이트에서 사용되는 UHF RFID 비발디 배열 안테나를 설계하였다. 안테나의 주파수 대역은 미국 기준의 RFID UHF 대역으로 $902{\sim}928MHz$이다. 안테나 설계는 먼저 단일소자 비발디 안테나를 설계한 후, 전력분배 비율 0.3:1:1:0.3으로 $1{\times}4$ 배열한 안테나로 설계하였다. 설계된 배열 안테나는 VSWR 2:1이하에서 $850{\sim}942MHz$인 S11 특성을 보였다. 이득은 최대방사 9.93dBi를 얻었다. 안테나 제작은 주파수를 높여 scale down하여, 1소자 비발디를 제작하고 이의 특성을 측정하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.358-360
• /
• 2002

기존의 정적 부하균등화 기법들은 동적 객체의 내재된 부하와 서버득의 다양한 상태 변화에 따른 능동적 부하분배가 불가능하다. 이를 위해 각 서버에서 프로세스가 자원을 전유하는 비율에 따라 해당 서버의 부하량을 판단하는 새로운 부하할당 기법을 제안하였다. 각 서버의 더미 프로세스는 자신이 프로세서를 점유하는 시점마다 해당 서버의 ID만을 전달함으로써 부하에 따른 차등하게 비동기된 서버보고를 수행한다. 이를 통해 라 서버는 자신의 부하량에 비례하여 부하균등화 참여율을 조정하여 성능저하를 최소화하고 부하량 판단 정보로 활용한다. 결국 제안기법은 웹 서비스의 부하의 성향에 무관하게 지능적인 부하할당을 가능케 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.155-158
• /
• 2009

During the construction project period, a lot of change orders happen in the design and construction stage Especially, The change order during construction stage causes the huge construction cost increase and duration delay. Accordingly, research on the change order of the construction stage is being progressed relatively active in the design stage, but the design changes are rarely made. In the design stage, the owner has to pay a design addition cost when change order due to the demands of owner happens. However Korea has not the specific standard about design additional cost in design stage. Therefore, this study analyzes problems of design additional cost estimation methods through the case study, and then indicates the method that the ratio distributes to details dividing design tasks and the method of the PM(Project Management). Eventually, this study expects to minimize claim related the design additional cost in design stage.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.54-60
• /
• 2004

In order to mitigate the problems in storage space and network bandwidth for the full CD quality audio, current digital audio is always restricted by sampling rate and bandwidth. This restriction normally results in low sample rate audio or calls for the data compression scheme such as MP3. However, they can only reproduce a lower frequency range than a regular CD quality because of the Nyquist sampling theory. Consequently they lose rich spatial information embedded in high frequency. The propose of this paper is to propose efficient high frequency enhancement of low sample rate audio using n adaptive filtering and DWT analysis and synthesis. The proposed algorithm uses the LMS adaptive algorithm to estimate the missing high frequency contents in DWT domain and it then reconstructs the spectrally enhanced audio by using the DWT synthesis procedure. Several experiments with real speech and audio are performed and compared with other algorithm. From the experimental results of spectrogram and sonic test, we confirm that the proposed algorithm outperforms the other algorithm and reasonably works well for the most of audio cases.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.57-62
• /
• 2011

This study was conducted to determine the distribution of nitrogenous compounds to various tree parts and the extent of reserve accumulation in persimmon (Diospyros kaki) under various fruit-loads. This study also ascertained the proportion of storage nitrogen made available for the new growth the following year. On June 15, the fruit-load was adjusted to a leaf-fruit (L/F) ratio of 10, 20, and 30, and some trees were completely defruited. Between June 15 and November 11, the increase of total amino acids were greater with a high L/F ratio. The amino acids increased in the root were negligible at the 10-L/F ratio. Of the total amino acids increased during this period, the proportion distributed to the root was 64% in the 20-L/F, 18.5% in the 30-L/F, and 81% in the defruited trees, and the distribution to the fruits was 81% in 10-L/F, 12% in 20-L/F, and 35% in the 30-L/F trees. Leaf amino acids decreased in the 10-L/F trees. Total proteins increased in autumn were greater as the L/F ratio was higher. Total proteins were in the fruits the most, and the distribution to the permanent parts was decreased as the L/F ratio was decreased. At the L/F ratio of 30, 59% of the total proteins increased in the autumn was distributed to the fruits and 40% to the root. Leaf proteins decreased at 10 and 20 L/F ratios. During the new growth from April 10 to June 10 the following year, amino acids decreased in the old wood and 1-yr-old shoot, whereas proteins decreased only in the 1-year-old shoots. Amino acids and protein decreased by 540 mg and 610 mg, respectively, in the roots of the defruited trees. Total amino acid and proteins in the newly-grown parts were the most at 730 mg and 1290 mg, respectively, when defruited the previous year. They were the least at the 10-L/F ratio, being 120 mg and 400 mg, respectively.

• Nuclear Engineering and Technology
• /
• v.13 no.4
• /
• pp.221-228
• /
• 1981

${\gamma}$-(U-$^{14}$ C)-BHC was applied to rice plants grown in a pot and its fate in the growth, polishing and oil-extraction processes of the grain was investigated. The $^{14}$ C-activity was absorbed and translocated widely in the plant and the recovery of applied $^{14}$ C-activity in the straw and grain was about 2.8%, of which 9.4% was found in the brown rice. The % partitioning of $^{14}$ C-residues in bran and polished rice was 12:88 and that in oil and oilcake was 37 : 63. Characterization of $^{14}$ C-residues indicated the presence of ${\gamma}$-BHC, pentachlorocyclohexene, trichlorobenzene and hydrophilic metabolites, whose proportions were different in the straw and grain.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.176-185
• /
• 2009

The realization and the performance of ICP source are strongly affected by its electrical impedance and the electric/magnetic field distribution. The ICP source impedance is determined by the antenna impedance and the plasma one. It is preferred to keep the imaginary impedance between -100 ohm to 100 ohm, since it should be avoided the high voltage formation on the antenna and abrupt impedance variation during the thin film process. The plasma uniformity is affected by the electric and magnetic field which is formed by the antenna current and voltage. The influence of azimuthal symmetry are shown by the electromagnetic simulation and the measurement result of plasma density. The radial uniformity can be controlled by locating the concentric antennas which have different diameters. The power distribution ratio and its control method are presented in the case of parallel antenna connections.