• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.154-158
• /
• 2012

In this paper, for low cost infrared optical equipment, we design and fabricate an infrared optical system for an uncooled detector using PGM(Precision Glass Molding) lenses. The designed infrared optical system has a good athermalization, and the material of all of its lenses is a chalcogenide glass suitable for the PGM method. In addition, we also fabricate the same infrared optical system using SPDT(Single Point Diamond Turning) lenses in order to measure the optical performance of PGM lenses. We measure the MTF(Modulation Transfer Function) of the two infrared optical systems which use the PGM lenses and the SPDT lenses. And then we compare and analyze the images of them both. As a result, we find that they have only a very small difference in optical performance. If the use of PGM lenses increases, we expect to reduce the cost of infrared optical equipment.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.320-325
• /
• 2007

Nickel powders were prepared from an aqueous nickel acetate solution and hydrazine hydrate using diethanolamine as the nonaqueous organic solvent in the conventional and microwave synthetic method. It was investigated that microwave non-thermal effect and synthetic condition affect the preparation of nickel powders by means of X-ray diffractometry, scanning electron microscopy, thermal gravymetry analysis, and X-ray photoelectron spectroscopy analysis. Compared with the conventional synthetic method, less of aggregation, smaller particle size, and more uniform distribution of particle size were obtained in the microwave synthetic method due to the non-thermal effect of microwaves.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.96-104
• /
• 2020

A catadioptric omnidirectional zoom optical system using a hybrid lens (COZOSH) that performs simultaneously two functions of a lens and a mirror was designed at the visible wavelength range for daytime unmanned surveillance, and its performance was analyzed. The hybrid lens has lots of advantages in terms of fabrication and assembly of a COZOSH, because of the obviation of a lens boring process and reduction of the number of optical components. Additionally, we designed the COZOSH to expand the compressed inner-image region of a donut image at low spatial frequencies. As a result, the optimized design performance of the optical system that satisfies all initial design specifications was obtained from calculation of the modulation transfer function, spot diagram, and tolerance analysis. We confirmed that the COZOSH is a passively athermalized optical system under conditions of temperature variation from -30℃ to 50℃, by using athermalization analysis during zooming.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.285-291
• /
• 2017

In this study, a case analysis for thermal design of electronic equipment using a phase change material(PCM) was performed numerically using ANSYS Fluent. Experiments were conducted to find the temperature increase(${\Delta}T_m$), melting temperature($T_m$), and volume expansion of the PCM under the melting process. To verify the accuracy of the Fluent solver model, $T_m$, ${\Delta}T_m$, and the melting time were compared with experimental results. To simulate the temperature stagnation phenomenon under the melting process, the equivalent specific heat method was applied to calculate the thermal properties of the PCM in the solver model. To determine the thermal stability of electronic equipment, we paid special attention to finding a thermal design for the PCM using fins. Further, an additional numerical analysis is currently underway to find an optimum design.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.210-216
• /
• 2016

In this paper, the electrical and resistance heating properties of carbon fiber heating elements with different electroless Ni-P plating times for car seat were studied. The specific resistance and specific heat of the carbon fibers were determined using 4-point probe method and differential scanning calorimetry (DSC), respectively. The surface morphology and temperature of carbon fibers were measured by scanning electron microscope (SEM) and thermo-graphic camera, respectively. From experimental results, the nickel layer thickness and surface temperature of carbon fibers increased with increasing the plating time. However, the specific heat and specific resistance decreased with respect to the increased plating time. In conclusion, the electroless Ni-P plating could improve the resistance heating and electrical properties of carbon fiber heating elements for car seat.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.153-162
• /
• 2021

In this article, the design of a variable F-number and triple magnification infrared optical system is described. That is a two-in-one optical system that combines an infrared search and track (IRST) system and an electro-optical tracking system (EOTS), where an afocal optical system is added to the IRST optical system designed already. The performance target is determined by analyzing system performance, and then the specification in the optical system design is calculated. This optical system contains a warm stop making it possible that one optics has two different F/# by cutting the size of aperture, and that is designed to suit this optics. The system satisfies the requirement such as a modulation transfer function (MTF). For operational assessment, the movement of the focusing lens group is analyzed over the change of temperature and target distance. By using this optical system, it is possible to develop equipment having two functions, infrared searching and electro-optical tracking.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.409-415
• /
• 2011

Purpose: To design applied anamorphic lens that focal length ratio is 3:1 optical system to improve detecting distance. Methods: We defined a boundary condition as $50^{\circ}{\sim}60^{\circ}$ for viewing angle, horizontal direction 36mm, vertical direction 12 mm for focal length, f-number 4, $15{\mu}m{\times}15{\mu}m$ for pixel size and limit resolution 25% in 33l p/mm. Si, ZnS and ZnSe as a materials were used and 4.8 ${\mu}m$, 4.2 ${\mu}m$, 3.7 ${\mu}m$ as a wavelength were set. optical performance with detection distance, narcissus and athermalization in designed camera were analyzed. Results: F-number 4, y direction 12 mm and x direction 36 mm for focal length of the thermal optical system were satisfied. Total length of the system was 76 mm so that an overall volume of the system was reduced. Astigmatism and spherical aberration was within ${\pm}$0.10 which was less than 2 pixel size. Distortion was within 10% so there was no matter to use as a thermal optical camera. MTF performance for the system was over 25% from 33l p/mm to full field so it was satisfied with the boundary condition. Designed optical system was able to detect up to 2.9 km and reduce a diffused image by decreasing a narcissus value from all surfaces except the 4th surface. From sensitivity analysis, MTF resolution was increased on changing temperature with the 5th lens which was assumed as compensation. Conclusions: Designed optical system which used anamorphic lens was satisfied with boundary condition. an increasing resolution with temperature, longer detecting distance and decreasing of narcissus were verified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.343-346
• /
• 2005

Three dimensional structures of detonation wave propagating through a square-shaped duct were investigated using computational method and parallel processing. Inviscid fluid dynamics equations coupled with $variable-{\gamma}$ formulation and simplified one-step Arrhenius chemical reaction model were analysed by MUSCL-type TVD scheme and four stage Runge-Kutta time integration. The unsteady computational results in three dimension show the detailed mechanism of transverse mode and diagonal mode of detonation wave instabilities resulting same cell length but different cell width in smoked-foil record.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.40-40
• /
• 2003

일반적으로 액티브 매트릭스 구동용 스위칭 소자의 경우 Turn-on 시간은 프레임 주파수와 게이트 라인의 수에 반비례하므로 LCD의 화면이 대면적으로 갈수록 스위칭 주파수는 증가하고 이는 채널에서의 열적 효과(thermal effect)를 유도하게 된다. 그러므로 전도성 유기물이 LCD용 유기박막트랜지스터(Thin Film Transistor) 등의 부품으로서의 적절성을 판단하기 위하여는 이에 대한 열적 특성에 대한 검증이 필요하게 된다. 따라서 본 연구에서는 유기 TFT의 열설계에 있어서 필수적인 물질변수로 인식되는 열적 특성들을 측정 계산하였으며 이를 소자의 열적 모델링에 적용하였다. 실험물질로는 pentacene을 사용하였으며 열확산도는 레이저 플레쉬법을 이용하여 측정하였다. 별도로 측정된 비열ㆍ밀도 등의 물성특성을 이용하여 상온에서 200 C의 온도범위에서 pentacene의 열전도도를 계산하여 그 결과를 열적으로 해석하였다. 계산결과, pentacene의 열전도도는 상온에서 약 0.0024 W/cm K의 값을 나타내었고, 70 C 까지 증가하여 약 0.0035 W/cm K의 정점을 보인 후에 200 C 에서 약 0.0022 W/cm K의 낮은 값을 나타낼 때까지 계속 감소하였다 아울러 본 연구에서는 실제 소자응용 시 박막으로서의 pentacene의 응용을 고려하여 실제 박막형태에 대한 열전도를 측정하였으며 이를 레이저 플레쉬법으로 측정한 값과 비교ㆍ분석하였다.

• The Korean Journal of Rheology
• /
• v.3 no.2
• /
• pp.124-134
• /
• 1991

세라믹 재료들을 성공적으로 사출성형하기 위한 적절한 사출조건을 얻기 위하여 그 동안 많은 실험을 하여 왔으나 게이트 크기가 미치는 영향에 대한 연구는 미진하였다. 본 연구에선 압출기를 사용하여 미세한 질화규소분말과 결합제시스템을 혼합하였으며 이러한 세라믹혼합물을 이용하여 사출압력, 보압시간, 보압, 배럴온도, 게이트의 형태와 크기 등을 변화시키면서 사출성형 실험을 수행하였다. 55%의 세라믹혼합물을 사출실험한 결과 적절한 게이트의 크기와 형태를 선택하고 105 MPa의 사출압력과 10초의 보압시간, 24$0^{\circ}C$의 배럴온 도와 같은 사출조건하에서 성형한다면 불완전 충전 체적수축과 젯팅현상을 최소화시킬수 있 어 성공적으로 인장시편과 굽힘시편을 성형할 수 있음을 알수있었다. 상용프로그램인 C-MOLD를 이용하여 사출조건과 게이트의 크기를 변화시키면서 혼합물의 유동특성을 해석 하였다. 유동해석 결과. 세라믹혼합물은 순수고분자보다 열전도도가 크고 비열이 작아서 고 화가 빨리 되므로 게이트의 크기는 사출압력, 배럴온도와 같은 사출조건과 더불어 중요한 사풀변수임을 예측할 수 있었다.