• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.498-504
• /
• 2011

The flapping characteristics and advance ratios at torque equilibrium state of autorotation were investigated when the airspeed, shaft angle, and pitch angle were varied. To simulate the airspeed increase, the aerodynamic data analyzed by using the compressible Navier-Stokes solver and Pitt/Peters inflow theory were used. Transient Simulation Method(TSM) was used to catch the torque equilibrium states. The maximum flapping angles at torque equilibrium state were correlated to the airspeed, shaft angle, and pitch angle. By comparing flapping behavior to the variation of advance ratio, the phenomenon that the extension of reverse flow area of retreating blade affects the characteristics of autorotation was qualitatively considered.

• Solar Energy
• /
• v.15 no.3
• /
• pp.91-103
• /
• 1995

Non-gray radiation with convection in the entrance region of a smooth tube is numerically investigated. The fluid is a mixture of carbon dioxide, water vapor, and nitrogen to simulate combustion products of propane. The flow is assumed to be laminar and hydrodynamically and thermally developing. The P-1 approximation is used to simplify the radiative transfer equation and the exponential wide band model is adapted to model the spectral absorption coefficients of non-gray gas mixture. The bulk mean temperature and Nusselt number variation along the tube axis are shown for several inlet and wall temperature pairs to show the effect of temperature on the heat transfer characteristics. Nusselt numbers for simultaneously developing flow are compared to those for thermally developing flow. In addition, the effect of the mole fraction of the non-gray gases on convective and radiative Nusselt numbers is investigated.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.21-30
• /
• 2023

Computer-generated holography requires much more computation costs and memory space rather than image processing. We implemented the diffraction calculation with low-precision and mixed-precision floating point numbers and compared the processing time and quality of the hologram with various precision. We compared diffraction quality with double, single and bfloat16 precision. bfloat16 shows 5.94x and 1.52x times faster performance than double precision and single precision. Also, bfloat16 shows lower PSNR and SSIM and higher MSE than other precision. However, there is no significant effect on reconstructed images. These results show low precision, like bfloat16, can be utilized for computer-generated holography.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2010

Dynamic soil resistances were simulated by modified Ramberg-Osgood model in order to predict penetration rate of sheet pile installed by vibratory pile driver. Various factors which characterize modified Ramberg-Osgood model were determined considering the shapes of dynamic soil resistance curves obtained from field test and standard penetration value (N value) was used as parameter that relates field test results to the suggested model. Penetration rates calculated by analytical model were smaller than those of field test and penetration times were vice versa. Therefore, predicted penetration rate and penetration time by analytical model are more conservative than those of filed test.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.41-46
• /
• 2004

In this paper, we study the stabilization control if an underwater vehicle from its initial posture to its desired one. We assume tint the underwater vehicle has velocity constraint, i.e. it has no velocity component for some direction. Our approach is based on the nonholonomic system which am derived from velocity constraints that cannot integrable. We proposed a control strategy for posture control of the underwater vehicle using multi-rate digital control. The proposed control scheme is applied to the berthing control if an underwater vehicle and verified the effectiveness if control strategy by numerical simulation.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.21-25
• /
• 1988

The predominant kernel(7mesh) of naked barleys were polished to give 65% yield. The diffusion coefficients and volume increase rates of polished naked burleys at $40^{\circ}C$ were $3{\sim}4$ and 2.2 times greater than those of naked barleys, respectively. The moisture gains of polished naked barleys were linearly related to the volume increases. The hardness of polished naked burleys during soaking was exponentially decreased.

• Food Industry And Nutrition
• /
• v.8 no.3
• /
• pp.45-51
• /
• 2003

본 연구는 생물공학적인 방법을 도입하여 폐기되는 신선초박에 H. erinaceum의 균사체를 발효시킨 배양생성물을 이용하여 기능성 건강 음료 개발을 검토 하고자 하였다. 1. 종균제조공정개발 : 기본 배지의 선발에서 Hericium erinaceum의 균사 생육에 적합한 배지를 선발하기 위하여 10여종의 고체배지를 사용하여 균사 생육 및 밀도를 조사한 결과는 YMPG 배지에서 59.8mm/14days로 균사 생육이 가장 우수한 것으로 나타났고, 최적 온도는 20-$25^{\circ}C$ 범위에 가장 생육이 좋았으며, 배지의 pH를 조절하여 균사생육을 조사한 결과, pH는 5.5, 접종비는 전배양액 9%(v/v), 배양에 적합한 배지액량은 50mL, 최적교반속도는 120rpm이었다. 이러한 최적 조건 하에서 배양 경시 변화를 살펴 본 결과 당은 거의 일정한 속도로 감소하는 반면에 건조균체량은 배양 8일째까지 증가하다가 더 이상 변화가 없었다. 2. 발효공정개발: 수분함량이 200%(v/v)에서, pH5에서의 생육속도는 90mm/30 days, $25^{\circ}C$에서의 균사생육속도는 89mm/30days로 각각 H. erinaceum균사의 생육이 가장 우수한 결과를 얻었다 3.추출공정 및 시제품 제조: 녹즙을 생산한 후 폐기되는 신선초박에 액체 종균을 접종하여 ,40일 동안 배양시켜 생육 상태가 우수한 배양생성물만을 선별하여, 열수추출방법으로 10$0^{\circ}C$, 10시간 추출한 것을 음료제조의 원료로 하고, 음료의 기호성을 향상시키기 위해 유기산 및 한방추출물을 첨가하는 균사체음료의 조성비를 얻었다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1066-1074
• /
• 1990

In this paper, we attempt to control induction motors with high power efficiency as well as high dynamic performance by utilizing the recently developed theories : singular perturbation technique and noninteracting feedback control. Our controller consists of three subcontrollers` a saturation current controller, a decoupling controller, and a well-known flux simulator. The decoupling controller decouples rotor speed (or motor torque) and rotor flux linearly. Our controller does not need the rotor resistance that varies widely with the machine temperature. To illuminate the practical significance of our results, we present simulation and experimental results as well as mathematical performance analysis.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.50-55
• /
• 1995

향상되어진 93-PCGC-2는 기존의 PCGC-2와 같이 미분탄 연소를 포함하는 다양한 반응성흐름과 비반응성 흐름을 설명하기 위해 2차원 정상상태 모델로 제시되어 졌다. 93-PCGC-2는 실린더형의 축 대칭계에 응용되어질 수 있고, 난류(Turbulence)는 유체역학식과 연소기구 양쪽을 위해 고려되어졌으며, 불연속 세로좌표 방법(Discrete Ordinates Method)을 이용하여 기체, 벽 및 입자들로부터의 복사열(Radiation)을 모사하였다. 입자상은 입자 무리들의 평균 경로들을 따라 해석하는 Lagrangian계의 해석법으로 모델화되어졌다. 석탄의 팽윤(Swelling)과 촤의 반응성에 관한 부모델과 더불어 새롭게 일반화된 석탄 탈휘발화 부모델 (FG-DVC)도 첨가되어졌다. 비균일 반응기구는 확산과 화학반응 둘 모두를 고려하였다. 주요 기상반응은 국부 순간 평형을 가정하여 모델화하였다. 그래서 반응속도는 혼합의 난류속도에 의해 제한되어진다. Thermal NOx과 Fuel NOx의 유한속도 화학론(Finite Rate Chemstry)에 대한 부모델은 화학반응속도론와 난류성의 통계치를 통합하여 만들어져 있다. 기상은 반복적인 line-by-line기교에 의해 풀려지는 elliptic partial differential equation으로 묘사되어진다. 수치적인 안정을 고려하기 위해 under-relaxation이 이용되어졌다. 이렇게 코드화된 93-PCGC-2는 연소를 위해 모사되어졌다. 또한 더 나아가 이 수치모델의 활용범위는 미분탄의 가스화에도 활용되어질 것으로 기대되어진다.

• KSBB Journal
• /
• v.18 no.6
• /
• pp.443-447
• /
• 2003

The microorganism was isolated from the night soil treatment plant for the removal of sulfur compounds. The growth conditions of the sulfur-oxidizing bacteria were investigated and the isolate characterized as Thiobacillus noveilus SRM. The optimal pH of Thiobacillus novellus SRM on cell growth was pH 7.0 and the optimal temperature was 30$^{\circ}C$ and the optimal air flow rate was 1 vvm, respectively. As a results of cell growth from the Monod plot, the specific growth rate was 0.032 hr$\^$-l/, $V_{max}$ was 1.43 hr$\^$-l/ and $K_{m}$ was 0.32, respectively. The thiosulfate oxidation by Thiobacillus novellus SRM was made of sulfate ion. The sulfate ion reduced pH and decreased cell growth.