• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.751-756
• /
• 2010

Ultrasonic nonlinearity is very sensitive to changes in material properties. This paper describes the study of the correlation between heat treatment and ultrasonic nonlinearity by taking nonlinear factors into consideration. A modified formula was proposed for ultrasonic velocity. This formula indicated that the changes occurring in nonlinearity during heat treatments cause changes in the ultrasonic velocity. The experimental results show that the relative nonlinearity parameters calculated from the modified ultrasonic velocities and the ratio of amplitudes of the second harmonic and fundamental wave are in good agreement. The experimental results prove that heat treatment can result in changes in material nonlinearity. Moreover, the relative nonlinearity parameter calculated from the modified velocity formula is has a large value. Since this parameter has high sensitivity to changes in nonlinearity, it can be used to represent the relative nonlinearity change calculated in this study by using the modified formula for ultrasonic velocity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.174-177
• /
• 2003

$Cl_2$ 플라즈마를 이용한 BLT 박막의 식각에서 Ar 가스의 첨가에 따른 식각 속도, 선택비 및 식각 형상의 변화에 대하여 관찰하였다. BLT 박막의 식각 속도는 100% Ar 플라즈마에서 100 % $Cl_2$ 플라즈마에서의 식각 속도보다 약 1.5배정도 빨랐으며, 80% Ar/20% $Cl_2$ 조건에서 $503{\AA}/min$ 최대 식각의 최대 시각 속도를 얻었다. RF 전력과 직류 바이어스 전압을 증가함에 따라 식각 속도는 증가하였으며, $Ar/Cl_2$ 플라즈마의 식각 속도가 $Cl_2$ 플라즈마의 식각 속도 보다 높았다. 식각 공정 변수의 변화에 의한 플라즈마 변수가 BLT 식각 속도에 미치는 영향을 관찰하기 위하여 LP(Lanmuir porbe)와 OES(optical emission spectroscopy)분석을 수행하였다. Ar 첨가량이 증감함에 따라 LP 분석에서 전자의 온도는 증가하였으나 전자밀도는 감소하였다. 이는 Ar의 이온화 준위가 Cl 보다 높기 때문에 이온화 윷이 낮아지기 때문으로 판단된다, 또한, OES 분석에서 Ar 첨가량이 증가함에 따라 Cl 원자의 부피 밀도는 감소하였다. Ar 첨가에 의한 BLT 박막의 식각 속도의 변화와 LP 및 OES 분석을 고려하면, BLT 박막은 화학적 식각의 도움을 받는 무리적 식각에 의하여 식각됨을 확인하였다,

• KSBB Journal
• /
• v.9 no.5
• /
• pp.483-491
• /
• 1994

It is known that a key limiting factor to the use of ultrafiltration membranes is that of membrane fouling, which has been a major cause of permeate flux reduction. In this work, the effects of several factors (operating time, protein concentration, temperature and pH, etc.) influencing permeate flux during ultrafiltration of gelatin, casein and bovine serum albumin using a hollow fiber membrane(M. W. 10,000 cut off) reactor have been examined. The permeate flux of gelatin solution was maintained almost constant during the operation up to 6 hours, but those of casein and albumin solutions were decreased to 50% and 43% of initial value after an operation time of 60min. The permeate flux with increasing concentration and temperature of protein solutions increased, but the permeate flux showed a minimum value near the isoelectric point of proteins. The permeate fluxes of protein solution were enhanced by a temperature increase and pH control. Also, it is proposed that fouling can be decreased by the pretreatment of insoluble proteins with enzymes.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.129-134
• /
• 1991

반도체 물질들은 일반적으로 흡수 끝 (absorption edge) 근처에서 비선형 광학 계수가 이례적으로 크고, 그 반응 속도가 빠른 특성을 갖고 있다. 본 논문에서는 반도체와 반도체 미세구조에 있어서의 비선형 광학적 특성 및 초고속 논리 광소자로서의 응용을 고찰하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.63-72
• /
• 1997

본 논문은 분사제트 주위에 형성되는 와류를 조절하여 제트를 제어하기 위하여 유동가시화, 속도분포 및 난류성분을 측정하는 실험을 수행하였다. 와류를 조절하기 위한 방법으로 제트노즐 주위에 환형관을 설치하여 환형관으로부터 2차제트를 분사 또는 흡입함으로써 제트주위에 형성되는 전단류를 변화시켰다. 2차제트 분사시 주제트 주위에 형성되는 와류의 발달을 억제함으로써 제트 포텐셜코어의 길이가 아주 길어지는 제트유동을 얻을 수 있었다. 환형관으로부터 주제트주위의 유체를 흡입하는 경우 제트주위의 전단류가 흡입비 R=1.3∼l.65에서 대류불안정성에서 절대불안정성으로 바뀜으로써 형성된 와류가 하류에서 제트중심부까지 발전, 결합되는 것을 방지하여 더 긴포텐셜코어와 중심에서 낮은 난류강도를 얻었다. 위의 결과는 환형관 주위에 부착한 깃의 높이 변화에 따라서 변화하였는데, 이것은 깃이 환형관을 통한 흡입유동의 유로역할을 함으로써 제트밖으로부터 흡입되는 것을 방지할 수 있었다. 분사제트 벡터링을 위하여 제트노즐 주위의 환형관을 이등분하여 한쪽으로만 제트주위의 유동을 흡입함으로써 제트주위에 다른 전단류를 형성함과 동시에 Coanda효과를 이용하여 분사제트를 편향시켰다. 편향되는 정도 및 난류성분은 홉입속도 비에 따라서 크게 바뀌었다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.507-520
• /
• 2001

In this paper, a hybrid algorithm for well detecting both abrupt and gradual scene changes is proposed. This algorithm examines only the candidate intervals for speedup using the binary tree method and skips the intervals that are not candidate. For accuracy, the temporal difference of variance is used to detect the gradual scene changes while the temporal difference of histogram is used to detect the abrupt scene changes. Experimental results show that the proposed hybrid algorithm using the binary tree method works up about 10 times faster that the sequential method and is effective in detecting abrupt scene change and gradual transitions including dissolving and fading.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.445-449
• /
• 2005

The mixed acoustic-convective mode combustion instability and the possibility of combustion control using a loudspeaker to these instabilities were studied. By changing inlet velocity, combustor length and equivalence ratio, the dynamic pressure signals and the flame structures were simultaneously taken. The results showed that as the combustor length increased and the inlet velocity decreased, the instability frequency decreased and the maximum power spectral densities of the dynamic pressures generally decreased. The instability frequency could be affected by an equivalence ratio over the operating conditions. From the data of close-loop control, as the loudspeaker may work out-of-phase with the natural instability, the optimum time-delay controller was confirmed to be able to reduce the vortex shedding from the mixed acoustic-convective mode combustion instability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.125-129
• /
• 2009

The basic design of liquid rocket engine combustion chamber for a large space launch vehicle was described. It has vacuum thrust of 74.8 ton, vacuum specific impulse of 306.9 sec, chamber pressure of 60 bar, mass flow rate of 243.6 kg/s and combustion characteristic velocity of 1730 m/sec. The details of combustion performance and geometrical parameter were also given. The 75 ton combustion chamber consists of the combustor head with injector and the chamber/nozzle with regenerative cooling channels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.65-65
• /
• 2009

본 연구에서는 ICP 식각장치 및 $Cl_2$/Ar 플라즈마에 의한 $Ba_2Ti_9O_{20}$(BTO) 박막의 식각 특성을 고찰하였다. XPS 분석 장치를 이용하여 식각 표면 반응을 조사하였으며, 공정 변수 ($Cl_2$/Ar 가스 혼합비, 소스파워, 챔버 압력, 바이어스 파워)에 따라 플라즈마 특성 변화를 Langmuir probe measuring system을 이용하여 추출하였다. $Cl_2$/Ar 가스에서 Ar 가스의 혼합비가 증가함에 따라 BTO 박막의 식각 속도는 감소하였으며, $Cl_2$ 가스만을 사용하는 경우, 31.7 nm/min 으로 가장 높은 식각 속도를 보였다. Ar 가스의 혼합비에 따른 BTO박막의 식각속도 변화는 Langmuir probe 특성과 XPS 분석결과로부터 플라즈마 내에 형성되는 Cl radical density와 밀접한 관련이 있는 것으로 판단할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.498-504
• /
• 2011

The flapping characteristics and advance ratios at torque equilibrium state of autorotation were investigated when the airspeed, shaft angle, and pitch angle were varied. To simulate the airspeed increase, the aerodynamic data analyzed by using the compressible Navier-Stokes solver and Pitt/Peters inflow theory were used. Transient Simulation Method(TSM) was used to catch the torque equilibrium states. The maximum flapping angles at torque equilibrium state were correlated to the airspeed, shaft angle, and pitch angle. By comparing flapping behavior to the variation of advance ratio, the phenomenon that the extension of reverse flow area of retreating blade affects the characteristics of autorotation was qualitatively considered.