• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.195-201
• /
• 2009

In this paper, the critical strains for pavement design were calculated from both Layered Elastic Program (LEP) and Finite Element Method (FEM) and the case studies which give similar critical responses were compared. Although FEM has been realized as a superior model, LEP is more favorable to pavement design due to its simplicity and thus, the technique to calculate the correct critical responses using LEP is significant. This study showed that KENLAYER can possibly estimate the critical responses close to ones obtained from TTIPAVE, which considers nonlinear cross-anisotropic behavior of unbound base materials, by adjusting the stress point locations.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.91-103
• /
• 2014

High performance steel for bridges(HSB 800) with a minimum tensile stress of 800MPa was recently developed. However, the study for local buckling behavior of plate girders considering interactive effects of flanges and webs is still insufficient. In this study, the flange local buckling(FLB) strength of plate girders with HSB 800 was evaluated by nonlinear finite element analysis. The flanges and webs of plate girders having I-section were modeled as 3D shell elements in the nonlinear analysis. Initial imperfection and residual stress were imposed on the plate girder. The high performance steel was modeled as a multi-linear material. Thus, parametric study of compression flanges with a compact, noncompact and slender web was performed. The flange local buckling behavior of plate girders was analyzed, and the nonlinear analysis results were compared with the nominal flexural strength of both AASHTO LRFD(2012) and KHBDC LSD(2012) codes.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.19-30
• /
• 2005

A coupled three-dimensional pile group analysis method was developed by considering complex behavior of sub-structures (pile-soil-cap) which included soil nonlinearity and the behavior of super-structure (pier). As an intermediate analysis method between FBPier 3.0 and Group 0.0, it took advantages of each method. Among the components of a pile group, individual piles were modeled with stiffness matrices of pile heads and soils with nonlinear load-transfer curves (t-z, q-z and p-y curves). A pile cap was modeled with modified four-node flat shell elements and a pier with three-dimensional beam element, so that a unified analysis could be possible. A nonlinear analysis method was proposed in this study with a mixed incremental and iteration techniques. The proposed method for a pile group subjected to axial and lateral loads was compared with othe. analytical methods (i.e., Group 6.0 and FBPier 3.0). It was found that the proposed method could predict the complex behavior of a pile group well, even though piles were modelled simply in this study by using pile head stiffness matrices which were different from the method introduced in FBPier 3.0.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.109-112
• /
• 2000

고역의 주파수 성분이 감쇠되어 선명도가 저하된 이미지나 선형 보간법에 의해 확대된 이미지의 계단모양 왜곡을 감소시킴으로써 경계선의 선명도가 저하된 이미지들을 위해 형태학적 처리(morphological processing)에 의한 이미지 윤곽선의 선명도를 향상시키는 방법을 제안하였다. 본 논문에서는 블러링(blurring)된 이미지를 화소의 명암에 따라 다수개의 평판 이미지(slice image)로 나누고 각 평판 이미지에 대해 반복적인 최대/최소값 필터(min/max filter)의 적용으로 얻어진 윤곽선의 중심을 기준으로 하여 팽창(dilation)과 침식(erosion)을 수행함으로 이미지의 윤곽선에서의 명암 변화에 대한 경사도를 크게 만들고 이로써 이미지 윤곽선의 선명도를 향상시키는 방법을 사용하였으며 모의 시험결과를 통하여 고역 주파수 강조에 의한 방법에 비하여 인위적인 잡음(artifact)없이 효과적으로 선명도를 향상시킬 수 있음을 보였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.77-85
• /
• 2020

In this study, the seismic fragility curve according to the boundary conditions is created for a two-pylon concrete cable-stayed bridge, and the effect of the boundary conditions on the seismic fragility of the target bridge is evaluated. An analysis model for the target bridge is constructed using Midas Civil, and a nonlinear time history analysis is performed by applying the fiber element, concrete and rebar material models. The boundary conditions between the pylon and the stiffened girder are classified into four types: rigid, unconstrained, pot bearing, and seismic isolation bearing, and the seismic fragility curves are created for each boundary condition. The plastic hinge section of the pylon, the connection part, and the cable are selected as weak members, and the earthquake vulnerability curve is created for them. As a result of the analysis, it is found that the seismic isolation bearing model shows the lowest damage probability in the pylon and the connection part, and the seismic fragility of the cable is less affected by the boundary conditions than other members.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1205-1214
• /
• 2013

Recently spaceborne SAR systems are increasing image resolution and frequency. As a high quality image resolution, the wider bandwidth is required and a wideband signal generator with RF component is very complicated and RF impairments of device is increased. Therefore, it is very important to improve performance by reducing these errors. In this study, the transmission signal of the wideband signal generator is applied to the phase noise, IQ imbalance, ripple gain, nonlinear model of high power amplifier. And we define possible structures of wideband signal generator and measure the PSLR and ISLR for the performance assesment. Also, we extract error of the amplitude and phase from the waveform and use a quadratic polynomial curve fitting and examine the performance change due to nonlinear device. Finally, we apply a high power amplifier predistortion method for non-linear error compensation. And we confirm that distortion in the output of the amplifier by intermodulation component is decreased by 15 dB.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.97-103
• /
• 2011

This paper presents a dual-band balanced mixer using nonlinear phase characteristic of composite right/left-handed (CRLH) transmission line. This metamaterial structure provides low LO leakage and high RF to LO isolation without additional filters for LO and RF path. The balanced mixer consists of balun and Wilkinson divider with dual-band characteristic of unit-cell which behaves like a CRLH metamaterial. Experimental results are used to verify the proposed metamaterial functions. The balanced mixer design results in an operating frequency of 870 MHz and 1660 MHz with an optimum mixer conversion loss of 15.2 dB at 870 MHz and 21.2 dB at 1660 MHz.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.2
• /
• pp.267-275
• /
• 2013

Among data mining techniques, the association rule is the most recently developed technique, and it finds the relevance between two items in a large database. And it is directly applied in the field because it clearly quantifies the relationship between two or more items. When we determine whether an association rule is meaningful, we utilize interestingness measures such as support, confidence, and lift. Interestingness measures are meaningful in that it shows the causes for pruning uninteresting rules statistically or logically. But the criteria of these measures are chosen by experiences, and the number of useful rules is hard to estimate. If too many rules are generated, we cannot effectively extract the useful rules.In this paper, we designed a variety of non-linear regression equations considering all association thresholds between the number of rules and three interestingness measures. And then we diagnosed multi-collinearity and autocorrelation problems, and used analysis of variance results and adjusted coefficients of determination for the best model through numerical experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1986

In this paper, the frontal method based elastic-plastic F.E.M. program for mini-computer was developed. Since, the executable source program size was restricted by the system core memory size on the mini-computer, the active variables were memorized by the element base and the nonactive varables were memorized to the external disc file. The active variables of the finally developed program were reduced enough to execute about 1,000 freedom finite element on the mini-computer on which available variables were restricted as 32,767 integers. A modified CT fracture test specimen was examined to test the developed program. The calculated results were compared with experimental results concerning on the crack tip plastic deformation zone. Recrystallization technique was adopted to visualize the intensive plastic deformation regions. The Von-Mises criterion based calculation results were well agreed with the experimental results in the intensive plastic region which was over than 2% offset strain. The F.E.M. results using the developed program were well agreed with the theoritical plastic boundary which was calculated by the stress intensity factor as r$_{p}$=(K$_{1}$$^{2}$/2.pi..sigma.$_{y}$$^{2}$).f(.theta.).).).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.827-833
• /
• 2012

The receiver performance is degraded by nonlinear memory problem in communication system. The pre-distorter techniques are an effective technique to compensate for the nonlinear distortion of the HPA without memory effects. However, memory effect of HPA can no longer be ignored when data signal is transmitted in high speed. Many adaptive pre-distorter schemes have been studied to compensate for memory effect problem of HPA in transmitter. The complexity and cost of satellite will increase when using adaptive pre-distorter in satellite communication system. In this paper, we propose receiver feedback closed loop pre-distortion technique in order to compensate for nonlinear problem of HPA with memory problem. The purpose of this paper is to reduce complexity and cost of satellite design by using only pre-distorter at terrestrial station.