• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.95-102
• /
• 2001

Fuzzy system is capable of uniformly approximating any nonlinear function over compact input space. The applications of fuzzy system, however, have been primarily limited by the need for large number of fuzzy rules, in particular, for the high-order nonlinear system. In this paper, we propose the reconstruction methods of fuzzy systems, parallel type and cascade, based on the decomposition of some classes of high-order nonlinear functions. Using the both types appropriately, we can reduce the number of fuzzy rules geometrically. It can be applied to the fuzzy system that has an online adaptive structure. Two examples of adaptive fuzzy sliding mode control are shown in the computer simulations to verify the validity of the proposed algorithm.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2019

This paper elaborates on the directional axis guidance and control algorithm used in mission flight for high altitude long endurance UAV. First, the directional axis control algorithm is designed to modify the control variable such that a strong headwind prevents the UAV from moving forward. Similarly, the guidance algorithm is designed to operate the respective algorithms for Fly-over, Fly-by, and Hold for way-point flight. The design outcomes of each guidance and control algorithm were confirmed through nonlinear simulation of high altitude long endurance UAV. Finally, the penultimate purpose of this study was to perform an actual mission flight based on the design results. Consequently, flight tests were used to establish the flight controllability of the designed guidance and control algorithm.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.523-530
• /
• 2007

Crane systems are very important in industrial fields to carry heavy objects such that many investigations about control of the systems are actively conducted for enhancing its control performance. This paper presents an adaptive control approach using the model matching for a complex 3-DOF nonlinear crane system. First, the system model is linearized through feedback linearization method and then PD control is applied in the approximated model. This linear model is considered as nominal to derive corrective control law for a perturbed crane model using Lyapunov theory. This corrective control is primitively aimed to compensate real-time control deviation due to partially known perturbation. We additionally study stability analysis of the crane control system using Lyapunov perturbation theory. Evaluation of our control approach is numerically carried out through computer simulation and its superiority is demonstrated comparing with the classical control.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.267-272
• /
• 2012

This paper propose the implementation of robust fuzzy controller for controlling an active magnetic bearing (AMB) system with 6 degree of freedom (DOF). A basic model with 6 DOF rotor dynamics and electromagnetic force equations for conical magnetic bearings is proposed. The developed model has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving this problem, we use the Takagi-Sugeno (T-S) fuzzy model which is suitable for designing fuzzy controller. The control object in the AMB system enables the rotor to rotate without any phsical contact by using magnetic force. In this paper, we analyze the nonlinearity of the active magnetic bearing system by using fuzzy control algorithm and desing the robust control algorithm for solving the parameter variation. Simulation results for AMB are demonstrated to visualize the feasibility of the proposed method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.115-120
• /
• 2019

In this paper, we present the results of the performance statistical analysis of the multi-robot formation control based on receding horizon particle swarm optimization (RHPSO). The formation control problem of multi-robot system can be defined as a constrained nonlinear optimization problem when considering collision avoidance between robots. In general, the constrained nonlinear optimization problem has a problem that it takes a long time to find the optimal solution. The RHPSO algorithm was proposed to quickly find a suboptimal solution to the optimization problem of multi-robot formation control. The computational complexity of the RHPSO increases as the number of candidate solutions and generations increases. Therefore, it is important to find a suboptimal solution that can be used for real-time control with minimal candidate solutions and generations. In this paper, we compared the formation error according to the number of candidate solutions and the number of generations. Through numerical simulations under various conditions, the results are analyzed statistically and the minimum number of candidate solutions and the minimum number of generations of the RHPSO algorithm are derived within the allowable control error.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.247-252
• /
• 2007

The container crane is one of the most important equipments at container terminal. If its working time in cycle could be reduced then container terminal efficiency and service level can be increased. So there are many i1forts to reduce working time of container cranes. It means how to design the controller with good performance which has small overshoot and swing motion of container crane. We, in this paper, present a state feedback controller based on LQ theory incorporating a RCGA which means real-coded genetic algorithm RCGA can search state feedback gains under given objective function. A set of simulation works are carried out in order to prove the control effectiveness of the proposed methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.399-404
• /
• 2006

The container crane is one of the most important equipment in container terminal. If its working time in cycle could be reduced then container terminal efficiency and service level can be increased. So there are many efforts to reduce working time of container crane. It means how to design the controller with good performance which has small overshoot and swing motion of container crane. We, in this paper, present a state feedback controller not based on LQ theory but RCGA which means real-coded genetic algorithms. RCGA can search state feedback gains in given objective function. several cases of simulations are carried out in order to prove the control effectiveness of the proposed methods.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2355-2357
• /
• 2003

비선형성을 가지는 실제 플랜트의 제어기를 설계하기 위해서는 플랜트와 외부환경에 대한 충분한 정보를 필요로 한다. 그러나, 제어기 설계 시에는 실제 플랜트의 수학적 해석의 어려움, 모델링 오차와 외란 등의 원인으로 고려해야 할 복잡한 사항들이 있다. 이를 해결 하기 위한 기존 연구로는 플랜트에 대한 시스템 식별과 선형화를 통하여 공칭모델을 선정하고, 이를 제어하는 Model-based 방법과 모델이 아닌 실제 플랜트의 입출력 데이터를 토대로 제어기의 게인들을 반복 조절하는 Model-free 방법 등이 있다. 본 논문에서는 Model-free 방법 중에 하나인 반복 게인 조절 알고리즘을 기반으로 이 방법의 단점인 수렴속도지연을 보상하기 위한 목적으로 Model-based 방법 중에 하나인 외란 관측기(Disturbance Observer)를 결합한 새로운 제어 알고리즘을 제안하고, ODD(Optical Disk Drive)에서 사용되는 플 랜트에 적용한 모의 실험을 통하여 그 유용성을 보였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.401-408
• /
• 2000

In this paper, we proposed a fuzzy controller that founded by the general feedback control with the new adjustment method when it's tuning. The general feedback controller is operated that supply to the plant making the control input multiplying the appropriate gain of controller on the error between the output of the plant and the reference, But proposed feedback fuzzy controller consist of three loops. The inner loop consists of plant and an ordinary feedback controller. The fuzzy inference of controller performed by the outer loops, which is composed of a fuzzy modeling and inference. We can observe that the output of control system converges toward the reference. Also, the behaviour of feedback fuzzy system is converged from the transient. That is, we verified that designed fuzzy controllers was adapted effectively through the experiments in the hydraulic motor system using floating point DSP processor.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1677-1678
• /
• 2008

본 논문은 회전기의 비틀림 현상을 억제하기 위하여 복소쌍입력 기술함수 기법을 이용한 제어시스템을 구성한다. 시스템의 주기적 출력은 복소 기술함수로 표현되며 제어기는 이러한 함수를 바탕으로 비선으로 설계된다. 제안한 알고리즘의 타당성 및 성능의 우수성을 검증하기 위하여 2관성 특성을 갖는 DC 전동기 시스템에 적용하여 실시간 실험을 통해 성능을 분석하였다. 시스템을 구동하기 위한 하드웨어 보드는 PSoC(Programmable System on Chip) 프로세서를 이용하여 임베디드 형태로 구성하였으며 실시간 데이터는 제안하는 제어알고리즘이 프로그램되어 있는 PC의 Matlab/Simulink 소프트웨어와 연동이 가능하게 구성하였다.