• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.227-231
• /
• 2006

This paper presents a robust speed control method of induction motors(IM) using a Non-linear PI controller(NPI). NPI is high gain controller in region of small error, and low gain controller in region of large error. So in steady state, system will be robust against variation of load torque. The simulation and experiment results confirm the validity of proposed control scheme.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.140-142
• /
• 2005

본 논문은 산업용 전동기 시스템의 속도제어기에서 계단(Step)입력에 대한 속도의 오버슈트를 억제하는 새로운 방식의 반와인드업(Anti-windup)기법을 소개한다. 비례(P)제어기에서 비례적분(PI)제어기로의 전환 시점에 적분기가 적절한 초기값을 가지게 하여 오버슈트를 상쇄 시키고 빠른 응답 시간을 가지게 하였다. 시뮬레이션을 통하여 제안된 방법의 타당성을 확인하고 기존의 반와인드업 기법과 비교하여 그 우수성을 검증하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.859-866
• /
• 2022

Active disturbance rejection control is a method in which the disturbance is removed from the controller by estimating the state variable using the Luenberger observer. The Luenberger observer is estimated by defining a nonlinear term including disturbance with constant characteristics in a steady state as a state variable. It can be shown that the speed tracking performance is improved by compensating the estimated state variable to the PI controller and the IP controller. The disturbance removal performance of the tracking control can be confirmed by observing that the estimated state error is within 1.9 [%] in the case of load fluctuation and the steady-state state tracking error converges to zero.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.132-132
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.797-803
• /
• 2012

Proportional solenoid valves are a modulating type that can control the displacement of valves continuously by means of electromagnetic forces proportional to the solenoid coil current. Because the solenoid-type modulating valves have the advantages of fast response and compact design over air-operated or motor-operated valves, they have been gaining acceptance in chemical and power plants to control the flow of fluids such as water, steam, and gas. This paper deals with the auto tuning of the position controller that can provide the proportional and integral gain automatically based on the dynamic system identification. The process characteristics of the solenoid valve are estimated with critical gain and critical period at a stability limit based on implemented relay feedback, and the controller parameters are determined by the classical Ziegler-Nichols design method. The auto-tuning algorithm was verified with experiments, and the effects of the operating point at which the relay control is activated as well as the relay amplitude were investigated.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.234-235
• /
• 2008

본 논문은 계통연계형 태양광발전 시스템의 Power Conditioning System의 성능 테스트를 위한 태양광 시뮬레이터의 제어기 최적 설계에 관한 내용이다. 태양광 시뮬레이터 기술의 핵심은 정확한 에너지원의 모델링과 빠르고 안정적인 전력증폭기 제어기술에 있다. 종래의 제어기인 비례 적분제어기를 사용하는 과정에서 비례 적분 제어기 특유의 응답지연 특성으로 시뮬레이터의 동적 특성을 완벽하게 구현할 수 없기에, 응답속도가 빠르고 안정적인 제어기법인 $H_{\infty}$제어 이론을 적용하였다. 태양광 시뮬레이터의 제어기 성능평가를 위해서 태양광 시뮬레이터의 출력을 결정 하는 DC Power Amplifier의 성능실험을 하였다. DC Power Amplifier를 정전압에서 부하의 투입/제거시 비례-적분 제어기와 $H_{\infty}$제어기의 응답속도와 변동전압의 크기를 비교하여 제어기의 성능을 비교하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.503-510
• /
• 2021

This study intends to apply the mathematical method of fractional order differentiation to a controller that controls the response of the system. Therefore, we design integrator for the fractional index by converting it into discrete time to construct a controller. The IP controller composes an integral controller for errors and the proportional controller applies only the system output. The controller is designed by using the fractional order integrator to the integral controller of the IP controller. First, the performance of the PI controller and the IP controller is compared, and the designed controller is applied to the speed control of the motor. As a result, the motor output speed was uniformed and precise control performance could be obtained. It was confirmed that the speed error in the steady state is within 0.1 [%], and it has precise and uniform speed control performance without overshoot.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.363-367
• /
• 1996

The robustness issues in fault detection and isolation(FDI) have received considerable attenuation in recent years, due to the increasing demand for safe and reliable operation of uncertain and complex dynamic systems. The aim of this paper is to present the FDI method by using proportional integral(PI) observer and unknown input observer(UIO) under the faults of actuators and sensors. Due to this simple residual generator, the PI observer can easily detect the both faults of actuator and sensor. A simulation results show the effectiveness of this methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.41-47
• /
• 1997

Fault diagnosis problem is currently a subject of extensive research in the control field. Although there are several works on the fault detection and isolation observers and the residual generators, those are con- cerned with only the detection of actuator failures or sensor failures. So, the perfect detection and isolation for the actuator and sensor failures is strongly required in the field of the practical applications. In this paper, a strategy of fault diagnosis using multiple proportional integral (PI) observers including the magnitude of actuator failures is provided. It is shown that actuator failures are detected and isolated perfectly by monitoring the integrated error between actual output and estimated output by a PI observer. Also in presence of complex actuator and sensor failures, these failures are detected and isolated by multiple PI observers.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.24-31
• /
• 2016

The performance characteristics of a dynamic control system are evaluated according to the transient and steady-state responses. The transient performance is the controllability of the output for the tracking of the reference or the ability to reduce or reject the effects of unwanted disturbances; alternatively, the steady-state performance is represented by the magnitude of the control error at the steady state. As the effects of the two performances on each other are reciprocal, a controller design that shows a zero steady-state error for the ramp input is uncommon because of the challenge regarding the achievement of an acceptable transient response. This paper proposes a PI+double-integral controller for the elimination of the steady-state error for the ramp input while a sound transient performance is maintained. The control-gain design procedure is described by the second-order response for the step input and the response of the error dynamics for the ramp input. The PI+double-integral controller is designed for the first-order transfer function that is derived from a system identification with the open-loop experiment data of the dc-motor. The simple structure of the proposed controller enables the adoption of a low-end microcontroller for the implementation of a real-time control. The experiment results show that the control performance is as effective as that of the simulation analysis for the operating point of linear system; furthermore, the PI+double-integral controller can be conveniently applied to the control system, which is desirable for the improvement of the steady-state error.