• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.102-110
• /
• 2010

H.264 SVC(Scalable Video Coding) provides the advantages of low disk storage requirement and high scalability. However, a streaming server or a user terminal has to extract a bit stream from SVC file. This paper proposes a bit stream extraction method which can get the maximum PSNR value while date bit rate does not exceed the available network bandwidth. To do this, this paper obtains the information about extraction points which can get the maximum PSNR value offline and decides the spatial/temporal resolution of a bit stream at run-time. This resolution information along with available network bandwidth is used as the parameters to a bit stream extractor. Through experiment with JSVM reference software, we proved that proposed bit stream extraction method can get a higher PSNR value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.69-77
• /
• 2002

Sine digital signal processing for motion pictures requires huge amount of data computation to store, manipulate and transmit, more effective data compression is necessary. Therefore, the ITU-T recommended H.26x as data compression standards for digital motion pictures. The data compression method that eliminates time redundancies by motion estimation using relationship between picture frames has been widely used. Most video conding systems employ block matching algorithm for the motion estimation and compensation, and the algorithm is based on the minimun value of cast functions. Therefore, fast search algorithm rather than full search algorithm is more effective in real time low data rates encodings such as H.26x. In this paper, motion estimation employing the Nearest-Neighbors algorithm is designed to reduce search time using FPGA, coded in VHDL, and simulated and verified using Xilink Foundation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1151-1168
• /
• 2009

Improving packet loss does not necessarily coincide with the improvement in user perceivable QoS because each frame carries different degree of importance. We propose Significance-aware packet scheduling (SAPS) to maximize user perceivable QoS. SAPS carries out two fundamental issues of packet scheduling: "What to transmit" and "When to transmit?" To adapt to the available bandwidth, it is necessarily to transmit the subset of the data packets if the entire set of packets can not be transmitted. "Packet Significance" quantifies the importance of the frame by elaborately incorporating frames' dependency. Greedy approach is used in selecting packets and transmission schedule is determined based on the Packet Significance. The proposed scheme is tested using publicly available MPEG-4 video clips. Decoding engine is embedded in the simulation software and user perceivable QoS is exposeed in termstermiSNR. Throughout the simulation based experiment, the performance of the proposed scheme is compared two other schemes: Size-based packet scheduling and Bit-rate based best effort packet scheduling. SAPS successfully incorporates the semantics of a packet and improves user perceivable QoS significantly. It successfully provides unequal protection to more important packets.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.16-21
• /
• 2014

HEVC is the latest joint video coding standard with ITU-T SG16 WP and ISO/IEC JTC1/SC29/WG11. Its coding efficiency is about two times compared to H.264 high profile. Intra prediction has 35 directional modes including dc and planer. However an accurate mode decision on lots of modes with SSE is too costly to implement it with hardware. The key idea of this paper is a DCT shared architecture to reduce the complexity of HEVC intra encoder. It is to use same DCT block to quantize as well as to calculate SSE in RDO. The proposed intra encoder uses two step mode decision to lighten complexity with simplified RDO blocks and shares the transform resources. Its BD-rate increase is negligible at 20% on hardware aspect and the operating clock frequency is 300MHz@60fps on FHD ($1920{\times}1080$) image.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.62-67
• /
• 2001

In the recent mobile communication systems, the performance of Turbo Code using the error correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the turbo decoder. However, performance depends on the interleaver depth that need a large time delay over the reception process. Moreover, Turbo Code has been known as the robust ending method with the confidence over the fading channel. The International Telecommunication Union(ITU) has recently adopted as the standardization of the channel coding over the third generation mobile communications such as IMT-2000. Therefore, in this paper, we proposed of the method to improve the conventional performance with the parallel concatenated 4-New Turbo Decoder using MAP a1gorithm in spite of complexity increasement. In the real-time video and video service over the third generation mobile communications, the performance of the proposed method was analyzed by the reduced decoding delay using the variable decoding method by computer simulation over AWGN and fading channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1405-1412
• /
• 2015

Recently, Due to the rapid growth of broadcasting communication and video coding technologies, the demands for immersive media contents based on 3D stereoscopic video will increase steadily. And the demands must ultimately provide the contents for users which are in wireless channel such as vehicle, train, and ship. Thus, in this paper, we transmit the 3D stereoscopic video over the maritime Rician channel that direct wave is more dominant than reflective wave. Besides, we present unequel error protection (UEP) by applying hierarchical 4/16-QAM to V+D(Video plus Depth) format which can represent 3D stereoscopic video. We expect our system to provide seamless broadcasting service for users with poor reception condition.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.71-77
• /
• 2015

Currently, numerous (broadcasting) programs are being provided to viewers, which makes it hard for viewers to select a program to watch. Especially, surfing channels watching the program videos (which is the most general manner of searching a program) became a time consuming task of performing several tens of channel changes (a channel change takes about 0.7 second). In the paper, a data service for guiding programs using the multi-view of program videos is proposed. The data service allows viewers to navigate all program videos without channel changes. To implement the data service, a method for composing and transmitting multi-view videos with the meta data for handling each video of the multi-view has been devised and a Java API has been implemented to clip, resize, and display parts of the multi-view videos.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.77-83
• /
• 2015

Block Truncation Coding, or BTC, is a type of lossy image compression technique for grayscale images. It divides the original images into blocks and then reduces the number of grey levels in each block to compute the mean and standard deviation. BTC has also been adapted to video compression. Another variation of BTC is Absolute Moment Block Truncation Coding. AMBTC is computationally simpler than BTC. In this paper, we proposed new image compression method based on BTC, which is applied patterns to improve compression rate and image quality. This method make two codebooks to extract 36 and 64 patterns from the highest frequency patterns in BTC. When you are compressing an image, you compare many block patterns to that of codebook and use to compress indexes of identical patterns. We experiment our proposed scheme with 36 patterns and the experimental results showed the compression rate of 1.37 bpp. In this paper, our proposed scheme showed higher compression rate rather than that of BTC. In experiment, we used standard images for the performance evaluation.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.39-45
• /
• 2017

Image compression is now essential for applications such as transmission and storage in data bases. For video and digital image applications the use of long tap filters, while not providing any significant coding gain, may increase the hardware complexity. We use a wavelet transform in order to obtain a set of bi-orthogonal sub-classes of images; First, the design of short kernel symmetric analysis is presented in 1-dimensional case. Second, the original image is decomposed at different scales using a subband filter banks. Third, this paper is presented a technique for obtaining 2-dimensional bi-orthogonal filters using McClellan transform. It is shown that suggested wavelet bases is well used on wavelet transform for image compression. From performance comparison of bi-orthogonal filter, we actually use filters close to ortho-normal filters on application of wavelet bases to image analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.90-97
• /
• 2005

Generally, DAB systems are divided into two categories, a stand-alone type and a PC/PDA-based type. The PC/PDA-based type has less mobility comparing to the stand-alone type, nevertheless, it has the advantage of using memory, audio/video decoder, or other resources of PC/PDA. The DAB receiver implemented in this paper is a PC-based receiver system employing USB interface. The USB interface bridge is designed using FPGA and EZ-USB development kit and the implemented DAB receiver adopts the bridge and makes use of the stand-alone typed DRK-026 receiver for experiments. The USB interface bridge transforms serial data into USB packets and all of related signals are controlled by hardware logics. The operation of the implemented DAB receiver is verified by sending audio data into the PC for decoding through USB interface bridge.