• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.151-152
• /
• 2020

4차 산업혁명의 핵심으로 떠오르고 있는 드론 산업의 성장속도가 점차 빨라짐에 따라 드론 활용도가 점차 높아지고 있다. 물류시장의 화두는 신속한 배송이지만 기존 택배 및 우편물 등을 배송하기에는 도로의 교통상황에 따라 시간이 많이 들고 인력비와 수송비등 자원이 많이 필요하다. 본 논문은 기존의 택배 시스템에서 사람이 직접 이동해서 물건을 전달하는 방식이 아니라 드론을 이용하여 효과적으로 배송할 수 있는 방법을 제안하고자 한다. 드론을 원하는 목적지까지 보내는 과정에서 발생하는 여러 돌발 상황을 대처할 수 있도록 GPS 및 아두이노기반의 여러 센서들을 이용하여 안정적으로 제어하는 것이 본 논문의 목적이다. 그 외 문자알림 서비스를 이용하여 택배의 실시간 위치를 알 수 있게 하고 도착알림 등을 받게 하여 편리성을 높이는데 역점을 두었다.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.443-455
• /
• 2001

An energy method has been used for an elastic formulation of bending vibration and buckling analysis of laminated composite plates on two-parameter elastic foundations. A quasi-elastic method is used for the solution of viscoelastic analysis of the laminated composite plates. The third-order shear deformation theory is applied by using the double-fourier series. To validate the derived equations the obtained displacements for simply supported orthotropic plates on elastic foundations are compared with those of LUSAS program Numerical results of the viscoelastic bending vibration and buckling analysis are presented to show the effects of layup sequence number of layers material anisotropy and shear modulus of foundations.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.245-250
• /
• 2002

We study numerically the temporal evolutions of two orthogonally polarized pulses with width less than 100fsec in all-optical phase-shift switches. We analyze the complicated interplay between a soliton pulse and a higher-order soliton pulse, including the self-and the cross-Raman scattering and the walk-off effect. We also investigate the influence of these interactions on switching performance, including pulse-shape, phase-shift distribution, and contrast ratio. In particular we show that an optical fiber with a typical birefringence (Δn : 2.4$\times$10$^{-5}$ ) can be used with good switching performance in such all-optical switches.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.13-19
• /
• 2005

An experimental study is presented for extinguishing characteristics of liquid fuel fire by water mist containing sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing an additive, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space to measure flame temperature variation. The average evaporation rate of a water droplet containing an additive was lower than that of a pure water droplet at a given surface temperature due to the precipitation of salt in the liquid-film and change of surface tension. In case of using an additive, the flame temperature was lower than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing an additive was increased reducing flame size. And also dissociated metal atoms, sodium, were reacted as a scavenger of the major radical species OH^-,\;H^+$ which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.138-138
• /
• 2003

광대역 LiNbO$_3$ 광변조기의 초고속 광 변조 구현을 위해서는 RF/ optical 속도 정합 및 임피던스 매칭 조건 하에서 낮은 구동전압을 얻을 수 있는 ridge 구조의 제작이 필수적이며 이런 구조 제작하기 위해서는 식각 속도와 식각면 거칠기 식각 profile 및 식각 과정에서의 반응물의 감소 등과 같은 개선을 위한 연구가 필요하다. 본 연구에서는 LiNbO$_3$ 기판 위에 메탈 마스크를 형성한 후 비등방성 (anisotropic) 건식 식각 방법인 NLD (Neutral Loop Discharge)로 플라즈마 식각을 하였다. NLD plasma 식각은 1Pa 이하의 압력에서 낮은 전자 온도를 갖는 고밀도 플라즈마를 생성하고 이온 플라즈마를 형성하여 LiNbO$_3$ 표면의 원자와 분자를 이온충돌효과를 이용하여 물리적인 식각과 discharge로 형성된 레디칼 (radical)과의 상호작용에 의한 화학적 식각 메커니즘에 의한 방법으로 plasma에 의한 시편의 손상이 적으며 식각 속도가 또한 높은 것이 특징이다. 본 논문에서는 안테나 파워와 가스의 유량에 따른 LiNbO$_3$ 식각 profile 특성에 관하여 연구 하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.955-965
• /
• 2014

Transport phenomena of reactant and product are directly linked to intrinsic inhomogeneous random configurations of catalyst layer (CL) that consist of ionomer, carbon-supported catalyst (Pt/C), and pores. Hence, electrochemically active surface area (ECSA) of Pt/C is dominated by geometrical morphology of mass transport path. Undoubtedly these ECSAs are key factor of total fuel cell efficiency. In this study, non-deterministic micro-scale CLs were randomly generated by Monte Carlo method and implemented with the percolation process. To ensure valid inference about Pt/C catalyst utilization, 600 samples were chosen as the number of necessary samples with 95% confidence level. Statistic results of 600 samples generated under particular condition (20vol% Pt/C, 30vol% ionomer, 50vol% pore, and 20nm particle diameter) reveal only 18.2%~81.0% of Pt/C can construct ECSAs with mean value of 53.8%. This study indicates that the catalyst utilization in fuel cell CLs cannot be identical notwithstanding the same design condition.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.23-30
• /
• 1989

Propagation phenomena of nonlinear pressure waves in a bubbly mixture are studied. The governing equations for a bubbly mixture are derived heuristically and energy equation is incorporated with other governing equations to take thermal effects into consideration inside the bubble. This non-isothermal condition of the bubble inside is especially important when high amplitude pressure waves are treated. Keller's equation is adapted for the bubble dynamics as practical problem. Some numerical simulations are carried out for the shock tube problem using a computer program based on the above model. A comparison with experimental results of Noordzij and van Wijngaarden shows that the structure of the wave in the shock tube experiment seems to be much more significantly affected 요 the complex heat transfer phenomena inside the bubbles than by the relative translational motion between bubbles and surrounding liquid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.153-160
• /
• 2007

Placing antennas of low power base stations below surrounding buildings, as in urban microcells, makes propagation characteristics strongly dependent on the building environment. As a result, propagation in these urban microcells is non-isotropic, so that the assumption of circular cells used in planning of conventional cellular sys toms is no longer valid. Assuming circular cells leads to a more conservative system design, implying more base stations. This work investigates the effect of cell shape, due to non-isotropic propagation, on the out-of-cell interference and Erlang capacity of CDMA system. Propagation is described by measurement derived models for low antennas in a rectangular urban street grid. The analysis is done for soft handoff protocols.

• Journal of the Korean Institute of Gas
• /
• v.10 no.1 s.30
• /
• pp.26-31
• /
• 2006

For the purpose of evaluating the availability of manifold safety devices installed in the LPG(Liquefied Petroleum Gas) refuelling stations, the quantitative analysis of the frequency on BLEVE(Boiling Liquid Expanding Vapor Explosion) scenario was performed. The amount of frequency reduction was the way of assessing safety devices availability. In this analysis, we could find out what sorts of safety devices are essential to satisfy acceptable social risk criteria and are prioritized to install in the future.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.207-215
• /
• 2004

In this study, the upper bound theory is applied to a reinforced slope to develop an limit state analysis method. As processing of this upper bound theory in formulating finite element, the basic idea of numerical method can be obtained from a macroscopic point of view with an anisotropic homogeneous material. The reinforced soil strength reliability depends on properties of reinforcements which consist of the interaction of interfaces between back fill and reinforcements. Both soil's mechanical property and overall behaviour of reinforced soil can be controlled via arranging geometry and relative proportions of reinforced soil. Therefore, the upper bound theory can not only predict the particular limit state action of reinforced soil slope but also is efficiently able to estimate the local plastic failure.