• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.46-53
• /
• 1989

유한요소법을 이용하여 애뉼라다이 팽창현상을 수치 해석학적으로 분석하였다. 이보 고는 계속적인 연구의 일부로써 비탄성 비뉴토니안 유체인 지수법칙형의 유체에 대한 모사 이다. 이지수법칙형의 유체는 간단하나 고분자 공정 연구에 많이 쓰이는 구성식으로써, 분석 결과는 환형압축체의 두께는 지수법칙 지수에 비례하여 증가하였다. 높은 전단응력 감소유 체의 경우 두께는 증가하지 않고 감소하였다. 비등온 유체 및 여러 다른 형태의 압출형에 대한 수치해석 결과도 예시하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.41-43
• /
• 2000

대기오염물질은 산불·황사 등과 같은 자연현상에 의해 발생되기도 하지만 생산과 소비등 인간의 모든 활동과정에서 발생한다. 대기오염물질은 바람·비등에 의해 다른 지역으로 이동하거나 제거되는데 오염된질의 이동·반응 등에 의해 배출원 주변지역은 물론 멀리 떨어진 지역에까지 영향을 미칠 수 있다. 이러한 대기오염의 특징으로 인해 일정한 지역 전체가 하나의 대기오염권역이 되기도 하며, 때로는 국경을 넘어 이동하기도 한다. (중략)

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.95-102
• /
• 1995

작동유체로서 비등점이 서로 다른 2종류, 즉 2성분 혼합물을 사용한 2상 밀폐 열싸이폰은 단일성분의 열싸이폰 보다 공학적으로 우수한 성능을 갖는다. 따라서 상 분리 현상이 나타나지 않은 안정적인 혼합물인 물/에탄올의 혼합물을 작동유체로 사용한 열싸이폰의 작동특성이 실험적으로 수행되었다. 실험에서는 시동성, 정상상태 작동, 경사시 작동특성 및 열전달 한계(Dry-out) 등에 관한 2성분 열싸이폰의 작동특성에 관해서 고찰되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.12
• /
• pp.953-963
• /
• 2015

There is an increasing need to understand the thermal-hydraulic phenomena, including the critical heat flux (CHF), in narrow rectangular channels and consider these in system design. The CHF mechanism under a saturated flow boiling condition involves the depletion of the liquid film of an annular flow. To predict this type of CHF, the previous representative liquid film dryout models (LFD models) were studied, and their shortcomings were reviewed, including the assumption that void fraction or quality is constant at the boundary condition for the onset of annular flow (OAF). A new LFD model was proposed based on the recent constitutive correlations for the droplet deposition rate and entrainment rate. In addition, this LFD model was applied to predict the CHF in vertical narrow rectangular channels that were uniformly heated. The predicted CHF showed good agreement with 284 pieces of experimental data, with a mean absolute error of 18. 1 % and root mean square error of 22.9 %.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.189-196
• /
• 2002

The components and alignment parameters of a flat-field soft x-ray spectrometer used in the wavelength range below 50 $\AA$ are determined, and the characteristics of the spectrometer are analyzed. It consists of a toroidal mirror, a slit, a varied line-spacing concave grating, and a soft x-ray detector. The space-resolved spectral image of a source is formed on a single plane using the tordidal mirror and the 2400-grooves/mm varied line-spacing concave grating. The former is used to compensate for the astigmatism caused by the grazing incidence of soft x-ray light on the concave grating. The spectral and spatial resolutions of the spectrometer are calculated by applying the wave front aberration theory, and the diffraction efficiency is calculated by applying the scalar diffraction theory.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.15-23
• /
• 2002

In most cryogenic liquid rocket engines, liquid oxygen manifold and injector are not thermally insulated from room temperature environment fur reducing system complexity and the weight. This feature of cryogenic liquid rocket engine results in the situation that cryogenic liquid oxygen flow is easy to be vaporized especially in the vicinity of the manifold and the injector wall. The research in this paper is focused on two-phase flow phenomena of liquid oxygen in rocket engine. Vapor fraction was estimated by comparing the measured two-phase flow pressure drop in engine manifold and the injector with ideal single phase pressure drop. Heat flux into cryogenic flow is estimated by measuring the wall temperature on the engine manifold to examine boiling characteristics. Suitable correlations for cryogenic two-phase flow were also reviewed to see their applicability. In addition, the effect of vapor generation in liquid rocket engine manifold and injector on engine performance and stability was considered.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2003

This paper considered the structural mechanism of transitional boundary layer by the experimental approach. In order to measure the turbulence quantity in the boundary layer, we made a wind tunnel with 400${\times}$190${\times}$2500 mm test section and a flat plate with well fabricated leading edge. Hot wire anemometer was used for acquiring the continuous turbulence signal which is processed by special software. The results of experiment show that the region where turbulence spot is dominant moves from near wall to overall layer and thus the anisotropy of velocity fluctuation shows so large value. Also the turbulence energy originally contained in low frequency band comes up to the high frequency band. Finally the turbulence model needs minimum two length scales to consider the pre-transition region.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.472-478
• /
• 2005

From a rapid cooling to a slow cooling in the actual cooling process in shipyards, the phase of steel becomes martensite, bainite, ferrite, and pearlite. In order to simulate the cooling process, heat transfer analysis was performed considering the effects of impinging water jet, film boiling, and radiation. From above simulation it is possible to find the cooling speed at the inherent strain region and volume percentage of all phases in that region. By the suggested method based on the precise material properties calculated from volume percentage of all phases, it will be possible to predict the plate deformations by line heating more precisely. It is verified by comparing with some experimental results that the present method is very effective and efficient.

• The Journal of Natural Sciences
• /
• v.17 no.1
• /
• pp.39-50
• /
• 2006

There are two relaxation frequencies in orthogonally polarized dual-mode solid-state lasers. Complex dynamic behaviors such as chaos can be observed by modulating orthogonally polarized dual-mode solid-state lasers. In this paper, we derived Maxwell-Bloch equations by considering anisotropy explicitly in laser-atom interactions and explained the complex nonlinear dynamical behaviors.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.3
• /
• pp.103-110
• /
• 2001

관입체 주변에서 발생하는 지반의 과잉간극수압은 그 측정위치에 따라 영향을 받는 것으로 알려져 있다. 특히 관입체의 선단과 축표면에서의 간극수압반응은 상당히 다른 것으로 알려져 있다. 본 연구에서는 지반에 대한 관입시험시 주변지반에서 발생하는 간극수압의 반응에 대하여 Louisiana State University의 시험토조를 사용하여 조사하였다. 또한 시험결과를 비등방성 수정 Cam Clay 모델을 이용한 유한요소해석과 비교하였다. 본 연구로부터 관입체 주위에서 발생하는 간극수압은 예측한 바와 같이 선단부위에서 크게 나타나고, 뒤로 갈수록 작아지는 현상을 나타내었다. 이와 같은 현상은 전단에 의하여 발생한 간극수압과 압축에 의하여 발생한 간극수압의 상호간섭에 의한 것으로 나타났다.