• The monthly packaging world
• /
• s.309
• /
• pp.74-77
• /
• 2019

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.183-189
• /
• 2005

Films of poly(vinyl alcohol)(PVA)/chitosan blends and its blend hydrogels were prepared by the solution casting method. The state of miscibility of the blends and blend hydrogels were examined over the entire composition range by differential scanning carorimetry (DSC), thermogravimetry (TGA), and dynamic mechanical analysis (DMA). DSC analysis shows the depression of melting point of PVA in the blends and the decrease of crystallization temperature of PVA in the blends were observed with increasing chitosan content in the blends. TGA analysis indicates that chitosan was thermally more stable than PVA and the thermal stability of PVA in the blends was higher than that of pure PVA, due to some interactions between two component polymers in the blend. The glass transition temperature $(T_g)$ of the chitosan and of PVA, measured by DMA, were at 160 and $90^{\circ}C$, respectively. The $T_g$ of the blends was changed with the content of chitosan in the blends. The results of thermal and viscoelastic analysis indicate some miscibility between component polymers in the blend exists. Moisture and cross linking in the blend and blend hydrogel, which strongly change thermal and physical properties of hydrophilic polymers, affected the miscibility of chitosan and PVA to a small extent.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.511-514
• /
• 2012

Polyethylene mulches have been used for weed control in vegetable production in Korea. One of the additional benefits associated with polyethylene mulches is soil warming. The objective of this study was to evaluate the effects of colored mulches on soil temperature change and Chinese cabbage yield. Mulch treatments were green (GV), black (BV), transparent (TV), and non-mulched (NM) soil. The highest soil-warming effect occurred under green mulch, and the lowest effect was found under black mulch. Daily mean values of soil temperature (10 cm depth) under GV were $2^{\circ}C$ higher than in NM soil. At midday (16:00), mean soil temperature was higher by $3.9^{\circ}C$ in GV, $3.1^{\circ}C$ in BV, and $2.1^{\circ}C$ in TV as compared to NM soil. At night (20:00-06:00), there was no significant difference in soil temperature among the treatments of different colored mulch, but soils in the mulch treatments were $2.4^{\circ}C$ higher as compared to NM soil. As compared with NM, the yield of Chinese cabbage under GV, BV, and TV were higher by 6.0, 26.0, and 12.0%, respectively.

• Clean Technology
• /
• v.4 no.2
• /
• pp.54-60
• /
• 1998

Polyphenylvinylketone (PPVK) having a carbonyl group at the side chain was blended with polystyrene (PS) to investigate the effect of vinylketone polymers on the photodegradability of the blend as a function of U.V. irradiation time. Hydrogenated polyphenylvinylketone (PPVK(H)) which is made by hydrogenation of some of the carbonyl groups in PPVK was also blended with PS to check the role of carbonyl carbonyl group in the process of photodegradation. Photodegradability was also investigated for blends of PS with polymethylvinylketone (PMVK) and for copolymers of styrene and methylvinylketone (SMVK) to compare the effect of copolymerization versus blending on photodegradability. PPVK showed higher photodegradability than PPVK(H), which followed that the blends of PS with PPVK gave higher degradability than with PPVK(H). In view of the fact that PPVK(H) is a partially hydrogenated version of PPVK, carbonyl group was confirmed to be involved in the photodegradation mechanism. When polymethylvinylketone (PMVK) was blended with PS, this blend showed a higher degradability than PS/PPVK blend. Therefore the highest photodegradability was achieved when PS was blended with PMVK followed by PPVK and PPVK(H) in order. When SMVK was UV irradiated, it showed the highest photodegradability than any blends mentioned above. Therefore, copolymerization was proved to be the better means of photodegradation than blending.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.277-285
• /
• 2011

Polysulfone (PSf) membranes were prepared via the phase inversion process. Polyvinylpyrrolidone (PVP) was added as a nonsolvent additive in the casting solution containing a mixture of PSf and n-methylpyrrolidone. The added PVP played a role of enhancing liquid-liquid phase separation of the casting solution, and significantly reduced the solution fluidity. When prepared via the diffusion-induced process using water as a precipitation nonsolvent, the solidified membranes revealed a typical asymmetric structure irrespective of the addition of PVP. With 5 wt% PVP content, the finger-like cavities were more developed in the membrane sublayer compared to that of the membranes prepared without PVP. In contrast, with more than 10 wt% of PVP, the formation of finger-like cavities was suppressed, and the thickness of polymer nodule layer was increased. The surface porosity was also increased with the PSf content in the casting solution. The water permeability curve as a function of PVP addition revealed the inflection point. The maximum water permeability for 12 wt% PSf membrane was obtained with 5 wt% PVP content, and that for 18 wt% PSf membrane with 15 wt% PVP.

• Journal of the Korean Chemical Society
• /
• v.67 no.6
• /
• pp.420-428
• /
• 2023

Crosslinking was introduced into vinylized-mesoporous silica and recycled polyethylene. By introducing a vinyl group into the mesoporous silica, it becomes a material capable of inducing cross-linking with non-polar polyethylene. By synthesizing vinylized-mesoporous silica and inducing crosslinking with recycled polyethylene, a recycled polyethylene composite with improved physical properties than existing recycled polyethylene was synthesized. In addition, even when a small amount is added according to the grade of recycled polyethylene using vinylized-mesoporous silica, the crosslinking reaction proceeds and all physical properties are improved. Four types of vinylized-mesoporous silica were synthesized, and the shape, microstructure, and functional groups were analyzed by TEM, BET, FT-IR, and XRD. Using vinylized-mesoporous silica, three types of compounds were blended by crosslinking reaction with recycled polyethylene. In order to confirm the presence or absence of crosslinking, analysis was performed using XPS and FT-IR, and physical properties such as tensile strength, elongation, flexural strength, and flexural modulus were confirmed using a universal testing machine. As a result, by applying vinylized-mesoporous silica to recycled polyethylene in various grades, the weak physical properties of existing recycled polyethylene were overcome. By applying the vinylized-mesoporous silica, recycled polyethylene composite material that overcomes the weak physical properties to the normal polyethylene, it shows the optimal physical property index that can be used commercially. Therefore, it is expected that it can potentially increase the use of recycled polyethylene and recycle resources.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.55-61
• /
• 1999

This study was carried out to investigate the influence of viscoelastic properties(or chemical composition) of a series of ethylen-viny1 acetate copolymers on impact noise and vibration damping of wood/polymer/wood sandwich composites. The impact noise and vibration damping of composites were very sensitive to the state of molecular motion of polymer. The noise and vibration damping of composites were maximum when the polymer was under the glass transition(vinylacetate 55~75%) at the test-temperature, and minimum rubbery state(vinyl-acetate 47~20%) or glassy state(vinylacetate 100~87%). The polymer under glass transition reduced the impact noise by 6~12 dB.

• Composites Research
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2014

In this study, an investigation on mechanical properties of flax/vinyl ester natural fiber composite was performed as a precedent study on the design of eco-friendly structure using flax/vinyl ester composite. Vacuum Assisted Resin Transfer Molding(VARTM) manufacturing method was adopted for manufacturing the flax fiber composite specimen. The mechanical properties of the manufactured flax composites were compared with flax composite data cited from some references. Based on this, the experimental data showed that the flax/vinyl ester composite has some advantages when it is applied to environment-friendly structure.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.10a
• /
• pp.28-31
• /
• 1998

경북 성주지역은 전국적으로 유명한 참외의 주산지이다. 시설참외 재배 단지 중 성주지역이 차지하는 면적이 약 47%('89)를 차지하고 있으며, 현재 군내 참외 재배 면적은 고소득 작목으로 날로 증가하고 있으며, 인근 선산, 김천, 구미지역에까지 확대되고 있는 실정이다. 사용하고 있는 온실은 단동비닐 온실이 85%, 연동비닐 온실은 15%로 거의 대부분이 단동 비닐 온실이다. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.192-196
• /
• 2003

폴리비닐알코올[poly(vinyl alcohol)(PVA)]은 1924년에 Herrmann과 Haehnel이 폴리아세트산비닐[(poly(vinyl acetate)(PVAc)]의 비누화 도중 처음 합성되었으며, 2차 세계대전 이후 일본에서 비닐론 섬유용 수지로 상업화되기 시작했다. PVAc의 비누화로부터 제조되는 PVA는 흰색의 분말상 고분자로 필름 및 섬유의 형성이 용이하고 표면 활성도가 높으며, 기계적 성질 및 접착 강도가 높고, 용해도와 화학적 반응성이 우수하다. (중략)