• Journal of Korea Foresty Energy
• /
• v.21 no.3
• /
• pp.28-33
• /
• 2002

This study was carried out to develop the technique for the production of high quality container seedlings of Comus controversa Hemsley. The seedlings were grown on the medium of peatmoss : perlite : vermiculite (1:1:1, v/v) in plastic net container and no-net plastic container as control for five months in the PE house. The seedlings grown in the plastic net container showed better root collar diameter growth, better development of long and fine roots, more increment of dry mass of roots and shoots than those grown in the no-net container. But the height growth of the seedlings in both container was similar. In particular the seedlings grown in plastic net container had no spiraling roots which were always observed in the control container seedlings. This result was induced by air-root pruning effect from the plastic net container.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2020

The objectives of this study were to investigate the standard and roof vent type of multi-span greenhouse and to analyze the characteristics of natural ventilation of multi-span greenhouse with different roof vent using computational fluid dynamics (CFD) code. The vent area proportion of surveyed farms averaged 10%, it was analyzed that the vent design for natural ventilation is insufficient. The results of natural ventilation efficiency of multi-span greenhouse according to roof vent type showed that the temperature of the position in which the crops grew was the lowest in the conical roof vent type and the highest in the half conical roof vent type. For the natural ventilation effect, the conical roof vent type was the best one, but the structural stability should be evaluated in light of wind load.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.860-870
• /
• 2016

Continuous monitoring of environmental parameters provides farmers with useful information, which can improve the quality and productivity of crops grown in greenhouses. The objective of this study was to develop a greenhouse environment measurement system using a low-cost microcontroller with open-source software. Greenhouse environment parameters measured were air temperature, relative humidity, and carbon dioxide ($CO_2$) concentration. The ranges of the temperature, relative humidity, and $CO_2$ concentration were -40 to $120^{\circ}C$, 0 to 100%, and 0 to 10,000 ppm, respectively. A $128{\times}64$ graphic LCD display was used for real-time monitoring of the greenhouse environments. An Arduino Uno R3 consisted of a USB interface for communicating with a computer, 6 analog inputs, and 14 digital input/output pins. A temperature/relative humidity sensor was connected to digital pins 2 and 3. A $CO_2$ sensor was connected to digital pins 12 and 13. The LCD was connected to digital pin 1 (TX). The sketches were programmed with the Arduino Software (IDE). A measurement system including the Arduino board, sensors, and accessories was developed (totaling $244). Data for the environmental parameters in a venlo-type greenhouse were obtained using this system without any problems. We expect that the low-cost microcontroller using open-source software can be used for monitoring the environments of plastic greenhouses in Korea.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.3-11
• /
• 2013

This study was carried out to estimate greenhouse gas reduction potentials under treatment methods of combustible wastes excavated from closed landfill. The treatment methods of solid wastes were landfilling, incineration, and production of solid recovery fuel. The greenhouse gas reduction potentials were calculated using the default emission factor presented by IPCC G/L method of IPCC (Intergovernmental Panel on Climate Change). The composition of excavated waste represented that screened soil was the highest (65.96%), followed by vinyl/plastic (19.18%). This means its own component is similar to the other excavated waste from unsanitary landfill sites. Additionally, its bulk density was 0.74 $t/m^3$. In case of landfilling of excavated waste, greenhouse gas emission quantity was 60,542 $tCO_2$. In case of incineration of excavated waste, greenhouse gas emission quantity was 9,933 $tCO_2$. However, solid recovery fuel from excavated waste reduced 33,738 $tCO_2$ of the greenhouse gas emission quantity. Therefore, solid recovery fuel production is helpful to reduce of greenhouse gas emission.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.101-112
• /
• 2016

Monitoring and control of the greenhouse environment play a decisive role in greenhouse crop production processes. The network system for greenhouse control was developed by using recent technologies of networking and wireless communications. In this paper, a remote monitoring and control system for greenhouse using a smartphone and a computer with internet has been developed. The system provides real-time remote greenhouse integrated management service which collects greenhouse environment information and controls greenhouse facilities based on sensors and equipments network. Graphical user interface for an integrated management system was designed with bases on the HMI and the experimental results showed that a sensor data and device status were collected by integrated management in real-time. Because the sensor data and device status can be displayed on a web page, transmitted using the server program to remote computer and mobile smartphone at the same time. The monitored-data can be downloaded, analyzed and saved from server program in real-time via mobile phone or internet at a remote place. Performance test results of the greenhouse control system has confirmed that all work successfully in accordance with the operating conditions. And data collections and display conditions, event actions, crops and equipments monitoring showed reliable results.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2013

$CO_2$ enrichment systems have been recently used to shorten the growth period of plants and the improvement of harvest and its quality. To accomplish these goals, manifold should be designed to supply the same amount of $CO_2$. In this study, CFD approach has been used to understand the effects of geometric parameters, such as tube and hole diameters. An optimized geometry has been derived through pipe and tube part, respectively. As a result, the deviation of flow rate less than 0.1 g/s was expected at all holes of the $CO_2$ enrichment system.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.523-532
• /
• 1999

The studies were carried out to develop an urban forest aromatic bath in the idle space within city area for handicapped persons, patients and city workers, who having less chance to visit the natural forest aromatic bath. The environmental conditions were checked in the experimental double vinyl house where native and exotic aromatic woody and herbaceous plants were growing with minimum energy input in the periods of mid-winter and mid-summer. The growth and photoperiodic responses of the plants to the low and high temperatures were observed during winter and summer respectively. The most of herbaceous plants in the double vinyl house with the controlled minimum night temperature of $-2^{\circ}C$ had no winter injury but did not grow and started the growth in April. The exotic herbs such as Catnip faassen's(Nepeta x faassenia) and Lemon bergamot(Monarda citriodora) grew better in the longer photoperiodic conditions. The growth rates of Abies koreana, Thuja koraiensis and Pinus sylvestriformis in the early spring were affected mainly by the night minimum temperature and less affected by the photoperiodic conditions during winter. The native aromatic herbs such as Robdosia japonica, Molsa punctulata, Agastache rugosa and Codonopsis lanceolata showed stimulatory growth at the 16 hours day-length in case of the high temperature vinyl hose. The height and root collar diameter growth of pine seedlings were inhibited in maxim temperatures over $40^{\circ}C$ during summer.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.159-163
• /
• 2008

A New spary chrysanthemum (Dendranthema grandiflorum) cultivar 'Water Fog' was bred by open pollination of 'Angaesoguk'. Its characteristics were investigated three times from 2004 to 2006 under forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Water Fog' was 24 October, but year-round production was possible by shading and lighting. It had flower diameter of 2.3 cm, 46.5 petals and 34.4 flowers per stem in autumn. The petal was narrow(0.4cm) and the color of petal was white with presence of green at flower center. Days to flower from short-day start for 'Water Fog' was about 48 in spring. 'Water Fog' showed the vase life of 22.6 days in autumn. This cultivar was registered for a commercialization in 2007. 'Water Fog' would be cultured under greenhouse and rain shelter condition in Korea.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.373-382
• /
• 2016

Under the Agricultural technology is influenced from climate that is requisite of seasonal. So this system will cover the problems and develop the agricultural industry as well. So far, the agricultural industry is developing however, it has the points of the weakness because of natural disasters such as wind risk and heavy snow. This paper designs system to change vinyl on the greenhouse. This is a preliminary study for the real-time feedback control of greenhouse. The study developed a wireless IoT sensor system based on authentic technology capacities, to integrate with the protected horticulture Management System. These system was used to evaluate the levels of the snow cover and wind through IoT devices. The existing greenhouse uses the warm water to clear snow or to change methods. This system will recover by changing the vinyl which is covered outside of the greenhouse. The points of the system is changing vinyl to spin pipe. It is contained extra vinyl. The effects of this system are minimized labor protected crops from natural disasters. For this purpose, the study first developed a wireless IoT sensor unit that integrates an MEMS device and wireless communication module. Also, the study developed an operating program that enables real-time response measurement. It will help operational and maintenance greenhouse as a result.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.202-210
• /
• 1983

These experiments were conducted to study the relationship among agronomic traits, varietal variation of grain-filling periods and the effect of environmental conditions on the grain-filling in the ten selected barley cultivars. The varietal variation of grain-filling periods was of significance: Tokak had the similar increment in both greenhouse and field plot, Suweon two row was believed to be an cultivar with short grainfilling period. Cultivars with higher grain-filling rates tended to. have significantly lower ash content. Ash content of a cultivar tended to be lower when grown under favorable condition. At maturity, the time of development of yellow or dark pigment at the crease base could be a possible criterion for physiological maturity determination. However, this requires further study. Average grain-filling period in the different conditions was constant, but varietal differences were 9 days in the greenhouse and 5 days in the field. The grain moisture content was not constant in accordance to both cultivars and growing conditions. Average accelerated days for heading and ripening periods were very constant in comparision with field and vinyl mulching suggests that the selected materials will be useful for genetic study on grain-filling periods. The cultivars and grown conditions with higher accumulated temperature per $100^{\circ}C$ from early grain-filling had larger grain-filling rates and heavier 1000 grain weight. This study showed that if the variation among and within cultivars is to be minimized, the greenhouse and vinyl mulching plots could be useful for genetic study on grain-filling periods in $BC_1$ and $F_2$ segregation.