• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.279-284
• /
• 1984

Microstructure of milk powder and cheese made from milk powder were observed by electron microscope. Freeze dried milk powder showed apple-like appearance. The cheese made from freeze dried milk powder had relatively flat surface and homogenous deposit in compare with classical processed cheese. Imported milk powder also indicated similar surface as well as freeze dried milk powder, however, the cheese made from imported milk powder had somewhat coarse surface structures with the spaces between casein matrix and deposit. Commericial milk powder showed irregular shape in size and coagulum which were possibly denatured in the course of drying. The cheese made from commercial powder indicted irregular and small deposit and porous structure. The porousity of the cheese seemed to be influenced by the degree of heat treatment. Denatured protein would be less dispersive than native in presence of polyphosphates. Fat globule and protein micelle of cheese made from skim milk powder get very adjacent to each other and showed compactness of micelles. It is thought that melting mechanism of skim milk powder was different from the melting of typical processed cheese.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.559-567
• /
• 2002

Poly (vinyl chloride) was blended with blended with vinyl chloride-acrylonitrile copolymers (MO-01 : M$\sub$w/=199049, AN=22.79%, MO-02 : M$\sub$w/=238523, AN=47.03%, MO-03 : M$\sub$w/=289496, AN=52.49%, MO-04 : M$\sub$w/=341837, AN=58.68% by mixing dimethylformamide (DMF) solution of each polymer and their morphology, viscosity, viscoelastic and mechanical properties were studied. Blends of PVC and MO-01 showed a homogeneous morphology. On the contrary, the other copolymer blends showed a large phase separation with spherical domains. Miscibility of blends of PVC and MO-01 was shown to be better than that of blends of other copolymers from morphological and viscoelastic studies. Even though blends of PVC and MO-01 were observed to be the considerable compatibility at a composition of PVC/MO-01=90/10, the mechanical properties of blend films were not improved too much in most blend cases.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.79-84
• /
• 2010

Matching spots between two sets of 2-dimensional electrophoresis can make it possible to find out the generation, extinction and change of proteins. Generally protein spots are separated by 2-dimensional electrophoresis. This process makes the position of the same protein spot a little different according to the status of the tissue or the experimental environment. Matching the spots shows that the relation of spots is non-uniform and non-linear transformation. However we can also find that the local relation preserves the topology. This study proposes a matching method motivated by the preservation of the topology. To compare the similarity of the topology, we compared the distance and the angle between neighbour spots. Experimental result shows that the proposed method is effective.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.127-134
• /
• 2020

The adsorption characteristics of the major tar compound, acenaphthene, derived from Taxus chinensis by the commercial adsorbent Sylopute were investigated using different parameters such as initial acenaphthene concentration, adsorption temperature, and contact time. Out of Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models, adsorption data were best described by Langmuir isotherm. The adsorption kinetics was evaluated by pseudo-first-order, pseudo-second-order and intraparticle diffusion models. The pseudo-second-order model was found to explain the adsorption kinetics most effectively. Thermodynamic parameters revealed the feasibility, nonspontaneity and exothermic nature of adsorption. In addition, the isosteric heat of adsorption was independent of surface loading indicating the Sylopute used as an energetically homogeneous surface.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.539-550
• /
• 2021

In this study, Zn and Zn-15Al were coated on general carbon steel by plasma arc metal spraying and then immersed in a 3.5wt.% NaCl solution similar to the seawater environment to evaluate the corrosion resistance properties. Through the surface shape analysis test by SEM and XRD, it was found that the Zn coating was porous and needle-shaped, so the penetration of the electrolyte was easy, and thus the corrosion rate was rapid. On the other hand, the Zn-15Al coating had a uniform and dense shape and was shown to suppress corrosion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.371.1-371.1
• /
• 2014

반도체 트랜지스터의 크기가 점점 미세화 함에 따라 이에 수반되는 절연막에 대한 요구 조건도 까다로워지고 있다. 특히 게이트 산화 막의 두께는 10 nm 이하에서 고밀도를 갖는 높은 유전율 막에 대한 요구가 증가되고 있으며 또한 증착 온도 역시 낮아져야 한다. 이러한 요구사항을 충족하는 기술중의 하나는 매우 낮은 압력 및 200도 이하 저온에서 절연막을 증착하는 것이다. 본 연구에서는 플라즈마 화학 기상 증착(PE-CVD) 시스템을 이용하여 $180^{\circ}C$의 온도 및 10 mTorr의 압력에서 SiN 및 SiCN 박막을 제조하였다. 박막의 특성은 원자층 증착 공정 결과와 유사하면서 증착 속도의 향상을 위해 개조된 사이클릭 화학 기상 증착 공정을 이용하였다. Si 전구체와 산화제는 기판에 공급되기 전에 혼합되어 1차 리간드 분해를 하였으며, 리간드가 일부 제거된 가스가 기판에 흡착되는 구조이다. 기판흡착 후 플라즈마 처리 공정을 이용하여 2차 리간드 분해 공정을 수행하였으며, 반응에 참여하지 않은 가스 제거를 위해 불활성 가스를 이용하여 퍼지 하였다. 공정 변수인 플라즈마 전력, 반응가스유량, 플라즈마 처리 시간은 최적화 되었다. 또한 효율적인 리간드 분해를 위해 ICP와 CCP를 포함하고 있는 이중 플라즈마 시스템에 의해 2회에 걸쳐 분해되어지고, 그 결과로 불순물이 들어있지 않는 순수한 SiN과 SiCN 박막을 증착하였다. XRD 측정 결과 증착된 박막들은 모두 비정질 상이며, 550 nm 파장에서 측정한 SiN 및 SiCN 박막의 굴절률은 각 각 1.801 및 1.795이다. 또한 증착된 박막의 밀도는 2.188 ($g/cm^3$)로서 유전체 박막으로 사용하기에 충분한 값임을 확인하였다. 추가적으로 300 mm 규모의 Si 웨이퍼에서 측정된 비 균일도는 2% 이었다. 저온에서 증착한 SiN 및 SiCN 박막 특성은 고온 공정의 그것과 유사함을 확인하였고, 이는 저온에서의 유전체 박막 증착 공정이 반도체 제조 공정에서 사용 가능하다는 것을 보여준다.

• Asian Journal of Turfgrass Science
• /
• v.21 no.2
• /
• pp.177-182
• /
• 2007

When a football field is constructed using sand medium, the fertilizer management has to be adjusted because of the low nutrient holding capacity and higher leaching rate. The objective of this study was to test the effects of slow release fertilizers on Kentucky bluegrass (Poa pratensis L.) growth in simulated sport field rootzones with PVC pipe pots. Data of turfgrass color, uniformity, growth rate, biomass above ground, and the nitrate content in the leaching solution was collected at different growing stages and during four simulated rain fall periods. The result showed that the nutrient release rate of urea was the highest and that of controlled release nitrogen fertilizer was the lowest. Effects of the controlled release nitrogen fertilizer lasted 14 days more than other lawn fertilizers and 28 days longer than regular urea with acceptable quality levels of turf. The slow release fertilizer also restrained excessive growth of the grass, reduced the times of mowing. Slow release fertilizer used in this study reduced $NO_3$-N leaching by almost 50% at the beginning of turf establishment.

• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.467-476
• /
• 2004

Because of crack control by steel bars after cracking the material models for reinforced concrete(RC) differ from those for plain concrete(PL). The nonlinear behavior of columns subjected to lateral load was simulated with reasonable accuracy in 3D analysis by applying distinct material models for RC and PL zone subdivided properly on the section. The shear strain is confirmed to develope unstably with ununiform distribution in out-of-plane direction. And this tendency becomes stronger as the thickness of column member increases in out-of-plane direction. If this ununiformity in strain distribution is not taken into consideration the capacity and the deformability of columns in shear dominant failure are overestimated excessively in two dimensional analysis. By introducing equivalent softening model a behavior of columns can be predicted too in two dimensional analysis.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.205-215
• /
• 2009

The conventional numerical models to analyze flow in subsurface porous media under the transient state usually generate numerical oscillation and unstability due to local flux domain for critical cases such as infiltration into initially dry soil during rainfall period. In this case, it is required refined mesh and small time step, but it decrease efficiency of computation. In this study, numerical unstability in discontinuity domain is removed by applying particle tracking algorithm to simulate unsteady subsurface flow with inflow boundary condition. Finally the hybrid LE FEM improving numerical stability is proposed. The hypothetical domains with unsteady uniform and nonuniform flow field were used to demonstrated algorithm verification. In comparison with analytic solution, we obtained reasonable results and conducted simulation of hypothetical 3-D recharge/pumping area. The proposed algorithm can simulate saturated/unsaturated porous media with more practical problems and will greatly contribute to accuracy and stability of numerical computation.

• Korean journal of food and cookery science
• /
• v.16 no.1
• /
• pp.22-26
• /
• 2000

In order to economically utilize dough with B. infantis and S. thermophilus as a bread improver, WHC, swelling power, solubility, farinograph, extensograph and amylograph of dough were investigated. Swelling power and solubility were less than medium flour and weak flour. WHC was higher than those. On rheological properties of dough, farinograms of dough showed progressively increasing water absorption, peak time only increased with addition of S. thermophilus. Extensograms showed that area increased S. thermophilus and B. infantis at 135 min. Extensibility and resistance to exntension of dough were higher in S. thermophilus than those in B. infantis. On amylograms, maximum viscosity of dough increased by addition of B. infantis and S. thermophilus.